Hook style sash lifts are a perennial favorite. The simple, beveled edge design dates from the Victorian era, but works with everything from Colonial Revival to Mid-Century Modern. Made of stamped sheet brass.

Parliament-style 2 1/4 x 3-inch hinges have been a favorite since the late 19th century. Our authentic reproduction is made of sturdy, solid brass, and features classic ball finials and a removable stainless-steel pin that repels rust. Ideal for deep set casement windows, it comes in your choice of four popular finishes.

The Colonial look of our 9 1/4-Inch Suffolk-Style Shutter Strap Hinges (no offset) is still popular today! The straps are forged out of steel and the pintles are made of solid, cast iron. They feature a textured surface and rust-resistant, powder-coated finish.

Our Pair of 1 3/4-inch Offset Suffolk-Style Middle Hinges with Narrow Plate Pintles offer traditional Colonial style. Constructed from stainless steel, they feature a rust-resistant and durable black powder-coated finish. They can be mounted to show either when the shutters are open or closed.

This small sized, ring handle casement latch is made of solid, non-corrosive brass. The handle and base are riveted for extra strength, making this a fine choice for large or hard to close windows. Includes 2 strike plate options.

This beautifully detailed sash lock is the crowning touch to your window restoration. Reproduced from an 1880s original, it features a lovely flower & scroll design, set off by a crisp, banded border. Finely crafted from strong and attractive cast brass or bronze, with your choice of a lacquered polished brass or weathered antique bronze finish. Over time humidity and use may cause the lacquer to wear, allowing natural and desirable aging to occur.

Our Square Sash Weight (5 lb.) easily combines with other size weights to create the proper counterbalance for smooth operating windows. When stacked together for instance, one 3 lb. and two 1 lb. take up the same space as one 5 lb. while moving just as smoothly within the window pocket. Ideal for use on new construction or as replacements for damaged or lost items.

Authentic colonial style and a rough black finish make these classic New York strap hinges a great choice for period restorations. These very sturdy hinges lift off for easy maintenance and have a 1 1/2-inch offset (3-inch throw). Made from 1/4-inch thick cast iron, they are powder coated to resist rust.

This cast brass stay for sash windows measures 2 5/8 by 1 1/8-inch including the handle. Available in several finishes to match any décor.

Popular throughout the Mid-Atlantic, these Large Georgetown Style Shutter Dogs are distinguished by their artful curl. Hand-forged from heavy duty iron, they are powder coated to resist rust. Easily mounted to masonry with the included lag bolt.

Despite the name, these rat tail tie backs are an elegant addition to any home. An authentic colonial design, they're made of heavy duty cast iron, then galvanized and finished with a rust-resistant black powder coat. Easily mounted to masonry with the included lag bolt.

The honest simplicity of Arts & Crafts style is reflected in this versatile (4 3/8-inch center-to-center) brass handle’s design. Use in multiples to add low-key charm to windows, cabinets and drawers. The slightly rounded profile gives it a comfortable feel. Choose from an array of popular finish options.

These vertical shutter straps are not only distinctive in appearance - they're ideal for shutters too narrow for horizontal straps. They can also be used with New York style hinge sets on tall shutters as a middle support hinge. These very sturdy hinges lift off for easy maintenance and have a 1 1/2-inch offset (3-inch throw). Made from 3/16-inch thick cast iron, they are powder coated to resist rust. Reversible.

Colonial style shutter hinges for your new home! These hinges are powder coated black and are offset mounted to fit most modern window styles. These very sturdy hinges lift off for easy maintenance and have a minimal offset and 2 1/4-inch throw.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (3 1/8-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

Square and simple in design, our versatile Transom Latch goes with everything, from Victorian to Mid-Century Modern. The circa 1900 design features all brass parts. The latch housing is stamped sheet brass, while the tongue, hook loop and strike plate are solid, cast brass. Choose from an array of popular finishes! This spring-loaded latch is typically installed at the top of the window sash and operated with a pull chain or pole-mounted transom hook (use transom chains to keep the sash from falling open). The base of the strike is mounted to the inside of the window frame and the catch portion protrudes over the sash, in order to engage the latch.

This stately, 9-foot Regency-style cremone bolt lends a dignified air to French doors, tall casement windows, and even cabinets and armoires. Classic arches and curves adorn its understated design, making it a fine choice for a variety of interiors. Solidly crafted from cast iron, it wears your choice of an antique iron or matte-black finish.

This heavy-duty casement adjuster is constructed from solid, cast brass. It’s suited for larger windows, and includes a smooth handle, two sill-mounted keepers, and holes for six opening positions. The lacquered surface preserves the finish for long-lasting wear.

Heavy duty 1/8-inch thick steel hangers designed for wood screens or storm sashes that need to open at the bottom for ventilation or egress. Each set includes 2 hooks & 2 hangers - enough for one sash.

True classics, these plate-mount, scroll design shutter dogs are an elegant choice for any style of home. Made of weather-resistant cast aluminum, they feature a durable black powder coated finish.

This late Victorian style casement latch is as practical as it is beautiful. The pendant-like handle pivots up to disengage the latch, but hangs tight to the sash otherwise, making this a great choice for windows with interior shutters or blinds! Made of durable, non-rusting cast brass, it includes three types of keeper - flush, mortise and side mount.

Parliament-style 2 1/2 x 4-inch hinges have been a favorite since the late 19th century. Our authentic reproduction is made of sturdy, solid brass, and features classic ball finials and a removable stainless-steel pin that repels rust. Ideal for deep set casement windows, it comes in your choice of four popular finishes.

Square and simple in design, this versatile transom latch goes with everything, from Victorian to Mid-Century Modern. The circa 1900 design is made of stamped and cast brass. Choose from 5 popular finishes!

Still popular today, these traditional Colonial-style Shutter Strap Hinges with Plate Pintles (2 1/4-Inch Offset) can be mounted to be visible whether your shutters are open or closed. Forged from galvanized steel with cast iron pintles, they feature a rough textured, black-powder coating for a perfect period look that helps to reduce rust. Made to last a lifetime, the reversible, lift-off design makes for easy installation and maintenance.