Shutter Hinges

Enhance the look of your home's exterior shutters with decorative shutter hinges from House of Antique Hardware. Our galvanized iron and stainless steel shutter hinge selection ensures that your shutters will look good while withstanding the elements year-round.

60 Products

Pair of 1 1/2-Inch Offset Galvanized Iron Shutter Strap Hinges With Plate Pintles

These traditional Colonial style 1 1/2-inch offset hinges with plate pintle are still popular today! The straps are forged out of steel and the pintles are made of solid cast iron, both galvanized. These versatile hinges can be mounted to show either when the shutters are open or closed. The rough textured black powder coating provides a great period look and helps reduce rust.

$26.99
Pair of 3/4-Inch Offset Galvanized Iron Shutter Strap Hinges With Plate Pintles

These traditional Colonial style 3/4-inch offset hinges with plate pintles are still popular today! The straps are forged out of steel and the pintles are made of solid cast iron, both galvanized. These versatile hinges can be mounted to show either when the shutters are open or closed. The rough textured black powder coating provides a great period look and helps reduce rust.

$27.39
"Acme" Black Cast-Iron Mortise Shutter Hinges - 3 1/8" x 2 1/2"

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (3 1/8-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

$44.99
Pair of Vertical or Middle Strap Shutter Hinges With 1 1/2" Offset

These vertical shutter straps are not only distinctive in appearance - they're ideal for shutters too narrow for horizontal straps. They can also be used with New York style hinge sets on tall shutters as a middle support hinge. These very sturdy hinges lift off for easy maintenance and have a 1 1/2-inch offset (3-inch throw). Made from 3/16-inch thick cast iron, they are powder coated to resist rust. Reversible.

$32.99
Set of New York Style Shutter Hinges With 1 1/4" Offset

New York style strap hinges are one of the most stylish and practical ways of hanging your shutters. This set of four hinges has a 1 1/4-inch offset (2 1/2-inch throw), which is ideal for most wood framed houses. Hand forged from heavy duty steel, they're galvanized and powder coated to resist rust.

$62.95
Pair of 9 1/4" Suffolk-Style Shutter Strap Hinges - No Offset and Pintle 1" Offset

The Colonial look of our 9 1/4-Inch Suffolk-Style Shutter Strap Hinges (no offset) is still popular today! The straps are forged out of steel and the pintles are made of solid, cast iron. They feature a textured surface and rust-resistant, powder-coated finish.

$31.99 Sold Out
Pair of Suffolk Style Stainless-Steel Middle Hinges with Plate Pintles - 1 3/4" Offset

Our Pair of 1 3/4-inch Offset Suffolk-Style Middle Hinges with Plate Pintles offer traditional Colonial style. Constructed from stainless steel, they feature a rust-resistant and durable black powder-coated finish. They can be mounted to show either when the shutters are open or closed.

$77.95 Sold Out
Set of Cast Iron New York Style Shutter Hinges With 1 1/2" Offset

Authentic colonial style and a rough black finish make these classic New York strap hinges a great choice for period restorations. These very sturdy hinges lift off for easy maintenance and have a 1 1/2-inch offset (3-inch throw). Made from 1/4-inch thick cast iron, they are powder coated to resist rust.

$63.95
Set of New York Style Shutter Hinges For New Construction

Colonial style shutter hinges for your new home! These hinges are powder coated black and are offset mounted to fit most modern window styles. These very sturdy hinges lift off for easy maintenance and have a minimal offset and 2 1/4-inch throw.

$65.95
"Acme" Black Cast-Iron Mortise Shutter Hinges - 3 3/4" x 2 1/2"

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (3 3/4-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

$46.99
Set of Cast Iron New York Style Shutter Hinges With 2 1/4" Offset

Authentic colonial style and a rough black finish make these classic New York strap hinges a great choice for period restorations. These very sturdy hinges lift off for easy maintenance and have a 2 1/4-inch offset (4 1/2-inch throw). Made from 1/4-inch thick cast iron, they are powder coated to resist rust.

$68.95
"Acme" Black Cast-Iron Mortise Shutter Hinges - 4 1/2" x 2 7/8"

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (4 1/2-Inch x 2 7/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

$56.95
Pair of Shutter Strap Hinges with Plate Pintles - 2 1/4" Offset

Still popular today, these traditional Colonial-style Shutter Strap Hinges with Plate Pintles (2 1/4-Inch Offset) can be mounted to be visible whether your shutters are open or closed. Forged from galvanized steel with cast iron pintles, they feature a rough textured, black-powder coating for a perfect period look that helps to reduce rust. Made to last a lifetime, the reversible, lift-off design makes for easy installation and maintenance.

$34.99
Set of "Clarks Tip" Black Cast-Iron Shutter Hinges with 1 1/4" Throw

This charming Set of Clarks Tip Black Cast-Iron Shutter Hinges (1 1/4-inch throw), were commonly found on Victorians and early 20th century Colonials. Intended for flush applications, they are surface mounted and lift off, making it easy to install or remove your shutters. Features a rust resistant, powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two fasteners - enough to complete one window.

$38.99
Pair of 3/4-Inch Offset Galvanized Iron Shutter Strap Hinges With Lag Pintles

These traditional Colonial style 3/4-inch offset hinges with lag pintles are still popular today! The straps are forged out of steel and the pintles are made of solid cast iron, both galvanized. These versatile hinges can be mounted to show either when the shutters are open or closed. The rough textured black powder coating provides a great period look and helps reduce rust.

$33.99
"Acme" Cast Iron Mortise Shutter Hinges - 6 1/2" x 3 1/2"

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (6 1/2-Inch x 3 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

$57.95
"Acme" Cast Iron Mortise Shutter Hinges - 3 1/8" x 2 1/2"

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (3 1/8-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

$30.99
"Acme" Black Cast-Iron Mortise Shutter Hinges - 6 1/2" x 3 1/2"

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (6 1/2-Inch x 3 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

$80.95 Sold Out
Pair of 1 1/2-Inch Offset Galvanized Iron Shutter Strap Hinges With Lag Pintles

These traditional Colonial style 1 1/2-inch offset hinges with lag pintle are still popular today! The straps are forged out of steel and the pintles are made of solid cast iron, both galvanized. These versatile hinges can be mounted to show either when the shutters are open or closed. The rough textured black powder coating provides a great period look and helps reduce rust.

$33.99
Set of Suffolk Style Stainless-Steel "L" Hinges with Narrow Plate Pintles - 3/4" Offset

Our Set of 3/4-inch Offset Suffolk-Style L Hinges with Narrow Plate Pintles offer traditional Colonial style. Constructed from stainless steel, they feature a rust-resistant and durable black powder-coated finish. They can be mounted to show either when the shutters are open or closed.

$76.95
"Acme" Cast Iron Mortise Shutter Hinges - 5" x 3"

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (5-Inch x 3-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

$35.99
Set of New York Style Shutter Hinges With 2 1/4" Offset

New York style strap hinges are one of the most stylish and practical ways of hanging your shutters. This set of four hinges has a 2 1/4-inch offset (4 1/2-inch throw), which is ideal for most brick houses. Hand forged from heavy duty steel, they're galvanized and powder coated to resist rust.

$64.95 Sold Out
Pair of Shutter-Strap Hinges with Plate Pintles - 3 1/4" Offset

Still popular today, these traditional Colonial-style Shutter Strap Hinges with Plate Pintles (3 1/4-Inch Offset) can be mounted to be visible whether your shutters are open or closed. Forged from galvanized steel with cast iron pintles, they feature a rough textured, black-powder coating for a perfect period look that helps to reduce rust. Made to last a lifetime, the reversible, lift-off design makes for easy installation and maintenance.

$40.99
"Acme" Cast Iron Mortise Shutter Hinges - 4 1/2" x 2 7/8"

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (4 1/2-Inch x 2 7/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

$35.99