Bennington style porcelain door knobs with black iron shanks are a great choice for rustic or refined interiors. Pair them with plain iron rosettes for a simple and understated door set. The shanks are powder coated to resist rust.

These vintage-style turn buttons make it easy to install and remove your wooden screens and storm windows. Constructed of heavy-duty cast iron, they provide long-lasting quality, and feature a plated black finish with copper highlights. This set comes complete with matching flat-head slotted screws.

Our 1 3/4-Inch Mortise Privacy Bolt provides added privacy or security for a variety of applications. Made of solid brass and classically styled with a pressed oval escutcheon and cast knob, it is easy to install and operate. Ideal for light doors, screen doors or cabinets, choose from a host of popular finishes.

The Sundowner 54-Inch Ceiling Fan brings outdoor decor to a whole new level. It features a stainless-steel hardware, energy efficient motor, and an array of popular finish options. Wet rated for exterior use, it is ideal for porches, gazebos, or other outdoor areas - even ones exposed to rain! Comes complete with 3-speed pull chain and manual reverse switch.

Our traditional Round Iron Cabinet Knob (1 1/4-Inch Diameter) is as versatile as they come. Not only does it suit almost any decor, it will also last a lifetime. Cast in iron with a lacquer finish, it is suitable for smaller cabinets, drawers, or furniture.

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (3 1/8-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

Olive knuckle hinges are an attractive alternative to standard butt hinges and offer easy lift on/off mounting or removal of your doors. This premium, precision made hinge is solid brass, available in an array of popular finishes. Hinge measures 5-inch high and 3 1/4-inch wide. Specify handing when ordering.

This extra large cast iron bracket was originally designed as a support for porcelain sinks. Over 15-inch in width and height, it's ideal for supporting kitchen or bar counters, deep shelves for large items, such as microwaves or video equipment, or even built-in benches. Due to the heavy weight of these brackets and the potential for carrying substantial loads, professional installation with blocking and sturdy fasteners is recommended.

This highly decorative 2 1/2-Inch Steeple-Tip Hinge is a Victorian-era classic. With its graceful tendrils, patterned barrel and elegant finials, it is a delightful addition to your home. Made of heavy-duty cast iron, this faithful reproduction has loose pins and slotted and Phillips screws.

A simple design and smooth surface gives our Utility cast-iron shelf bracket (12-inch by 9-inch) a versatile quality, making it ideal for just about any room. The arched support is an optimal choice for holding shelves to display keepsakes throughout your home, or to help organize a utility or laundry room.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (6 1/2-Inch x 3 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

Our Heavy-Duty Heart Design Dummy Strap brings Colonial flair to your decor. Made of hand-forged iron, the surface is phosphate treated then lacquered, for rust-resistant, long-lasting wear. Ideal for use on your entry door, garage or gate.

Classic Old World looks meet Spanish influence in the Mallorca 3-light flush mount fixture. An ideal light for Mediterranean-style homes. Install in an entry or sheltered patio to create ambience with a warm glow.

Ornate cast iron hinges add a delightful Victorian touch to any screen door. This handsome reproduction features charming acorn finials, a fanciful leaf pattern, and a choice of satin black or antique iron finishes. The strong, enclosed spring closes your door with a resounding bang!

The classic and versatile 3 1/2-inch ball tip door hinge has been a favorite since the late 19th century. Our authentic reproduction hinge has a loose pin with attached finial, slotted and Phillips wood screws, and heavy duty 1/8-inch thick leaves - just like the originals. Made of heavy duty cast iron with a lacquered finish.

Russell & Erwin designed this marvelous lion-head bracket around 1880. A fine example of the Renaissance Revival style, it adds a regal touch to any staircase. Made of cast iron with a lacquered finish.

With a 3 1/4-inch offset, these traditional arch-top pintles are suited for brick or stone houses. Use them to replace worn or damaged pintles, or to build your own custom sized shutter hinges (straps sold separately). Made of heavy-duty galvanized cast iron with a rust-resistant powder-coated finish.

With a central circle detail supported by a broad curve, this bracket is an all-around choice for your shelves, fitting with any style. Made from a heavy cast iron with a matte black finish.

Use these traditional tapered shutter straps to replace worn or missing parts, or to build shutter hinges for your specific needs (mounting pintles sold separately). They are designed to work with 7/16-inch diameter pintles and have a 3/4-inch offset. Made of heavy-duty galvanized steel with rust-resistant and powder-coated finish.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (3 3/4-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

This simple Plated-Steel Picture Rail Hook is an economical way to hang your pictures in true, period style. The steel is pressure-formed for added strength. Choose from an array of popular finish options.

Authentic colonial style and a rough black finish make these classic New York strap hinges a great choice for period restorations. These very sturdy hinges lift off for easy maintenance and have a 2 1/4-inch offset (4 1/2-inch throw). Made from 1/4-inch thick cast iron, they are powder coated to resist rust.

The heavily textured version of our Early American bean-tip strap hinge is ideal for rustic, plank-style doors. This versatile design with loose pin and reversible pad allows for full or half-surface application. For doors up to 175lbs.

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (4 1/2-Inch x 2 7/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.