A simple design gives our Arched cast-iron shelf bracket (10 3/4-inch by 8 3/4-inch) a versatile quality making it ideal for just about any room. The arched support is an optimal choice for holding shelves to display keepsakes throughout your home, or to help organize a Arched or laundry room.

The rustic character of colonial America is captured in this charming heart-tip strap hinge. Its surface is phosphate treated then lacquered, for rust-resistant, long-lasting wear. Our versatile design with loose pin and reversible pad allows for full or half-surface application. For doors up to 175lbs.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (3 1/8-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

With a large round knob and shapely guides, our 6-Inch Traditional Style Surface Door Bolt coordinates with virtually every style of hardware. Finely crafted from solid brass, it features a unique ball-bearing system and three mounting options.

The pairing of small iron rosettes and crisp white porcelain knobs makes a graphic period statement. This typical mid-Victorian combination works with everything, from a Greek Revival town house to a simple country farmhouse. A reproduction mortise lock with a solid brass face plate and interior components completes the vintage look.

The simple and straight forward design of this solid brass 4-inch hinge is ideal for your mid-century modern or contemporary home. This heavy duty hinge is loaded with features found in more expensive models - two ball bearings for extra durability, traditional square corners, removable stainless steel pins, and 1/8-inch thick extruded leaves for high strength.

Our Square Sash Weight (5 lb.) easily combines with other size weights to create the proper counterbalance for smooth operating windows. When stacked together for instance, one 3 lb. and two 1 lb. take up the same space as one 5 lb. while moving just as smoothly within the window pocket. Ideal for use on new construction or as replacements for damaged or lost items.

A House of Antique Hardware exclusive! Our Premium 3-Way White Push Button Light Switch is the most authentic you'll find anywhere. Faithfully reproduced from antique originals, it features larger, white buttons and genuine mother-of-pearl inlay. This iridescent shell shimmers as it reflects light, adding a touch of subtle elegance. The internal components have been painstakingly engineered for smooth operation, while retaining the classic snap sound and action. Built to modern safety standards (UL & CUL listed), it is the switch of choice for any period restoration.

Simple styling, great finishes and top-quality forged brass construction make the Providence our most versatile knob design. The 1 1/4-inch knob is useful cupboard doors or drawers, and goes with everything from Colonial Revival to Mid-Century Modern!

This heavy-duty casement adjuster is constructed from solid, cast iron. The handle is approximately 3/16-inch thick - well suited to large or heavy windows. It includes two sill mounted keepers and holes for five opening positions. Offered in durable matte black and lacquered antique iron finishes, it's a great choice for colonial, Tudor, Spanish or rustic country houses!

Reading Hardware designed this delightful swinging door push plate around 1885. The whimsical Aesthetic pattern, originally known as Windsor, is covered in stylized flowers, waves and bamboo. Our faithful reproduction is made of cast iron available in either antique iron or matte black.

The Colonial look of our 9 1/4-Inch Suffolk-Style Shutter Strap Hinges (no offset) is still popular today! The straps are forged out of steel and the pintles are made of solid, cast iron. They feature a textured surface and rust-resistant, powder-coated finish.

With its classic bevel-edged design, this single push button switchplate goes with everything from Colonial to Mid-Century Modern. Crafted from economical pressed brass or steel, it comes in a wonderful array of period and modern finishes.

This continuous hinge for Bahama or Bermuda shutters is made of two parts which slide together for easy installation and removal

Taking the form of a sparrow in flight, this charming cast iron picture rail hook was reproduced from a late Victorian original. In this unique design, the bird rotates to the right, allowing you to hang cord on the hook concealed below. Despite its delicate appearance, this cast-iron hook it is quite sturdy and well suited to larger or heavier items. Choose from natural iron with a lacquered finish or a variety of plated/painted options.

This charming Set of Clarks Tip Black Cast-Iron Shutter Hinges (1 1/4-inch throw), were commonly found on Victorians and early 20th century Colonials. Intended for flush applications, they are surface mounted and lift off, making it easy to install or remove your shutters. Features a rust resistant, powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two fasteners - enough to complete one window.

Classic acorn finials add a traditional touch to these deluxe carpet rods. The 1/2-inch diameter hollow tubing and plain brackets are made entirely of brass, with your choice of 6 classic finishes! Available in 28.5-inch, 36-inch, 48-inch and 72-inch lengths.

Our Berkshire Curbside Mailbox with Ashland Post boosts your curb appeal with its perfect combination of beauty and function. Made of durable, rust-proof aluminum, it features an impressive face, magnetic catch, and an overhang that keeps the interior dry. Each piece is powder coated to give it a chip-proof, fade resistant color adding to its long-lasting wear. The sturdy, yet elegant post is designed to withstand even the harshest weather conditions.

Dating from the later 19th century, this handsome Cast Iron Horizontal Rim-Lock Set with Bennington-Style Knobs suits Victorian, Craftsman or Colonial-Revival interiors alike. Finely crafted from cast iron and available in two vintage finish options, it features mostly brass interior parts for long-lasting quality. It is a period-perfect set, ideal for both rustic and refined decors. In addition to the key-operated dead bolt, there is a handy privacy lock (sliding tab on bottom of case). Comes complete with two fancy brass skeleton keys. Fully reversible for right or left-handed doors.

Our Solid Brass 2 1/2-Inch Non Mortise Ball-Tip Cabinet Hinges are the simplest means of installing inset cabinet doors. Surface mounted to the inside edge of the face frame and cabinet panel, they are easily mounted and adjusted. This pair of hinges is made of solid-brass and comes in an array of popular finish options.

Despite the name, these rat tail tie backs are an elegant addition to any home. An authentic colonial design, they're made of heavy duty cast iron, then galvanized and finished with a rust-resistant black powder coat. Easily mounted to masonry with the included lag bolt.

This classic Victorian floor grate will infuse period style into any new construction or restoration. Inspired by Gothic tracery found in stained glass windows, this intricate design turns an ordinary vent into a stylish accent. Our modern recreation is cast from solid iron and finished with a durable matte-black powder coat. These vent covers can be used as return air grilles or non-adjustable heat registers.

With its classic bevel-edged design, this double push button switchplate goes with everything from Colonial to Mid-Century Modern. Crafted from economical pressed brass or steel, it comes in a wonderful array of period and modern finishes.

The simple and straight forward design of our 3 1/2-Inch Solid Brass Ball-Bearing Door Hinge with Ball Tips is ideal for your traditional or contemporary home. This heavy-duty hinge is loaded with features found in more expensive models - two ball bearings for extra durability, classic square corners, removable stainless steel pins, and 1/8-inch thick extruded leaves for high strength. The 3 1/2-inch size hinge works for solid or hollow core doors.