This stately Regency-style 4-foot cremone bolt has a timeless quality - the design's classic arches and curves convey a dignified feel. Crafted from cast iron, it's a lovely way to upgrade smaller casement windows, cabinets, and furniture.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (5 1/2-Inch x 3 1/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

Our 3/4-Inch Chain Spirals are ideal for attaching sash chains to your double-hung sash windows. Without using screws, which could cause damage, the spiral fits within the existing mortise at the side of the window sash where the original sash cord was located. Made of solid steel, they are designed for long-lasting wear.

Rugged meets refined in our 6-Inch Classic Hammered-Surface Shutter Dogs. With their elegant profile and hammered texture, they beautifully compliment any style of home. Made of heavy, cast iron, they feature a weather resistant, powder-coated finish. Designed for masonry applications (anchors recommended - not included). Comes complete with lag screws, magnetic holders, and masonry anchors.

Get the look of functional hardware with these dummy tie backs. Intended for use with fixed shutters (wood or vinyl), they'll give your windows an authentic appearance. Made of heavy duty cast iron, galvanized and finished with a rust resistant black powder coat.

These charming, acorn tip hinges were commonly found on Victorians and early 20th century colonials. The hinges are surface mounted and lift off, making it easy to install or remove your shutters. The 3 1/4-inch throw is optimal for brick veneered homes.

This premium, solid-brass 12-inch casement stay delivers smooth function and long-lasting wear. The traditional-style, knurled knob lets you open, close, and secure your vintage, outswing casement windows with ease. It features beveled mounting plates is reversible for left or right handing, and comes hand-finished with our living antique patina.

Our Number-8 Cotton Sash cord with Galvanized Cable is typically used for counterbalance systems on double-hung windows. Made of premium-quality cotton yarn, its wire core adds strength and durability. It is suited for use on new construction, or for a worn or damaged system. Sold by the foot.

Sargent & Co., patented the design of hook-style sash lift on October 31, 1871. The ornate pattern is so lovely, you'll hate to cover it with curtains! Reproduced in cast iron from a bronze original. Lacquered.

This medium sized, lever handle casement latch is made of solid, non-corrosive brass. The handle and base are riveted for extra strength, making this a fine choice for large or hard to close windows. Finished with our exclusive living patina, it includes 2 strikes, one for mortise and one for rim mounting. Determined from the outside, this latch is for windows hinged on the left.

Reading Hardware originally created this lovely sash lift as part of their extensive Windsor hardware pattern. We've reproduced the circa 1885 Aesthetic design in durable cast brass, perfectly capturing the delicate pattern of waves and flowers. Hand-finished with our living antique patina, it will age gracefully, developing highlights with use.

Cast from heavy-duty, solid brass, this sturdy Transom Window Latch Hook In Antique-By-Hand will open and close your window with ease. The 1/2 inch diameter button fits into the loop on the transom catch, allowing you to push or pull the loop as needed to disengage the catch. Fits a 7/8-inch diameter pole. The hook is hand-finished with our exclusive antique patina.

Solid brass sash stop bead adjusters are a great alternative to using screws or nails to fasten the sash stops, and allow for easy removal and adjustment. These premium grade fasteners secure the stops and allow easy removal for refinishing, repairs, and periodic adjustment of wooden sash windows should they become difficult to operate due to seasonal weather changes.

Reading Hardware originally created this lovely sash lift as part of their extensive Windsor hardware pattern. We've reproduced the circa 1885 Aesthetic design in durable cast iron, perfectly capturing the delicate pattern of waves and flowers. Choose from matte black powder coat or lacquered antique iron finishes.

Our C-Hooks are ideal for attaching weights to the sash chains on your double-hung windows. Made of solid steel, they are designed for long-lasting wear. Used to attach chains to old style weights with a hole on the top.

Cast from heavy-duty, solid brass, this sturdy Transom Window Latch Hook in Lacquered Brass will open and close your window with ease. The 1/2 inch diameter button fits into the loop on the transom catch, allowing you to push or pull the loop as needed to disengage the catch. Fits a 7/8-inch diameter pole.

Our 7/8-Inch Chain Spirals are ideal for attaching sash chains to your double-hung sash windows. Without using screws, which could cause damage, the spiral fits within the existing mortise at the side of the window sash where the original sash cord was located. Made of solid steel, they are designed for long-lasting wear.

This charming Set of Clarks Tip Black Cast-Iron Shutter Hinges (3 1/4-inch throw), were commonly found on Victorians and early 20th century Colonials. Intended for flush applications, they are surface mounted and lift off, making it easy to install or remove your shutters. Features a rust resistant, powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two fasteners - enough to complete one window.

These brackets made of plastic and stainless steel can be used with all of our lag mount shutter dogs. Fits up to a 3/8-inch diameter lag bolt and is easy to adjust. The brackets hold the shutter panel and dog together firmly to reduce rattling in the wind.

A single small flower and a banded border give this iron sash lock a decorative touch. Pair it with fancy iron sash lifts for a complete Victorian look. Cast from heavy duty iron with a lacquered antique finish.

Reading Hardware originally created this lovely sash lift as part of their extensive Windsor hardware pattern. We've reproduced the circa 1885 Aesthetic design in durable cast brass, perfectly capturing the delicate pattern of waves and flowers. Polished and lacquered to preserve the shine.

Our Premium Spot Number-10 Sash Cord is typically used for counterbalance systems on double-hung windows. Made of premium-quality cotton yarn, a nylon fiber core gives it added strength and durability with a coating that is chemical, weather and heat resistant. It is suited for use on new construction, or for updating a worn or damaged system.

Square and simple in design, this versatile transom latch goes with everything, from Victorian to Mid-Century Modern. The circa 1900 design is made of stamped and cast brass. Hand-finished with our living antique patina!

Our Victorian-style Bermuda Shutter Fasteners are typically paired with Clarks Tip or full mortise-type shutter hinges. The catch is sill mounted, while the hook mounts to the lower front of the shutter. Made of cast-iron, they feature a weather resistant, powder-coated finish.