The classic and versatile 4-inch ball tip door hinge has been a favorite since the late 19th century. Our authentic reproduction hinge has a loose pin with attached finial, slotted and Phillips wood screws, and heavy duty 1/8-inch thick leaves - just like the originals. Made of heavy duty cast iron with a lacquered finish.

Keep your front entry free of debris with a this cast iron boot scraper. The rustic design hearkens back to pre-pavement times, when scraping one’s boots before entering a home or establishment was considered good manners.

Our Ulysses Coat Hook is an authentic reproduction of a late 19th-century design. Constructed of cast iron, it features a neoclassical ram's head motif and comes in your choice of two classic finishes. This decorative accent stands up to heavy use in your busy entryway, mudroom, or wherever it resides.

This highly decorative Victorian era hinge, with its delicately twining vines, patterned barrel and elegant finials, is a delightful addition to your home. Reproduced in heavy duty cast iron with a black powder-coated finish.

Rugged meets refined in these classic scroll design shutter dogs. With their elegant profile and hammered texture they beautifully compliment any style of home. Made of heavy duty cast iron, galvanized and finished with a rust resistant black powder coat. Designed for wood siding.

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (3 3/4-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

Dress up your drawers or furniture with this stylish pendant pull. This Colonial style drop pull is precision cast in Italy, it comes in your choice of antique patinas. Measures 2.91-inch x .79-inch overall.

The ornate, yet understated Ball-Tip Hinge (5-Inch) features a lovely pattern of vines against a stippled background, a decorated barrel and classic ball finials. Made of heavy duty cast iron with a black powder-coated finish, this faithful reproduction has loose pins and slotted and Phillips screws.

This late Victorian-era slide latch is an elegant addition to both antique and new cupboard doors. Reproduced from a circa 1880's original, its overall leafy design and cluster of berries featured on the knob are captured in sturdy cast iron. Suited for Victorian or Classical interiors, it comes in your choice of two classic finishes.

These deluxe stair runner rods feature graceful urn-shaped finials. Made entirely of Brass with an electroplated finish they're as durable as they are beautiful. The 1/2-inch diameter hollow tubing comes in 28.5-inch, 36-inch & 48-inch lengths

Dress up your cabinets or furniture with this stylish Colonial Revival pull. This elegant beaded knob is precision cast in Italy, it comes in your choice of antique patinas. Standard sized knob to suit most applications.

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (6 1/2-Inch x 3 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

Our Chelsea T-Handle Cabinet Knob (3 5/8-Inch x 7/8-Inch) adds an abundance of elegance to cabinets and furniture. This classical-style cabinet knob features a leafy motif, and our early 18th-century English, baroque-style Queensway back plate. Finely cast for intricate detail, this set comes in three rich, hand-applied finishes. Choose from a silvery antique pewter, rich dark brass, or radiant, satin 24k gold. Depending on your application, it can be installed either horizontally or vertically. Handcrafted in the USA.

For added charm to your décor, look no further than this petite knob featuring a beautifully detailed flower, ideal for small drawers and cabinet doors. Made in Italy and precision cast in zinc, it comes in a range of special finishes.

With a large circle detail and a straight support, this bracket is an all-around choice for your shelves, fitting with any style. Made from heavy cast iron with a matte black finish.

The simple, yet elegant 3 1/2-inch steeple tip door hinge has been around since the late 19th century. Our authentic reproduction hinge has a loose pin with attached finial, slotted and Phillips wood screws, and heavy duty 1/8-inch thick leaves - just like the originals. Made of solid cast iron finished with a versatile matte black powder coat.

These charming, acorn tip hinges were commonly found on Victorians and early 20th century colonials. The hinges are surface mounted and lift off, making it easy to install or remove your shutters. The 1 1/4-inch throw is intended for flush applications.

This simple, yet elegant 4-inch steeple tip door hinge has been around since the late 19th century. Our authentic reproduction hinge has a loose pin with attached finial, slotted and Phillips wood screws, and heavy duty 1/8-inch thick leaves - just like the originals. Made of heavy duty cast iron with a lacquered finish.

Rugged meets refined in these large size classic scroll design shutter dogs. With their elegant profile and hammered texture they beautifully compliment any style of home. Made of heavy duty cast iron, finished with a rust resistant black powder coat. Designed for masonry applications.

Recalling 16th-century English style, the Portobello Jeweled Knob (1 1/4-Inch Diameter) adds an elegant look to cabinets and furniture alike. Finely cast in pewter, its Renaissance-era leafy motif is displayed in precision detail while amber-color gems offer a charming accent. Choose from three luxurious finish options. Handcrafted in the USA.

These large and finely cast scallop design shutter dogs are ideal for coastal homes. Made of heavy duty cast iron, they're finished with a rust resistant black powder coat. Easily mounted to wood or masonry with the included lag bolt.

Accent furniture and cabinets throughout your home with this wonderful English-style pull. Inspired by Corbin's 1905 Mantura pattern, our modern recreation is finely cast in zinc for precise detail. Lavished with traditional, neo-classical designs, and your choice of three luxurious finishes, including satin 24K gold, it adds instant elegance to any formal decor. Handcrafted in the USA.

This classic 4 1/2-inch ball tip door hinge has been a favorite since the late 19th century. Our authentic reproduction hinge has a loose pin with attached finial, slotted and Phillips wood screws, and heavy duty 1/8-inch thick leaves - just like the originals. Made of solid cast iron with your choice of two versatile finish options.

The ornate, yet understated Ball-Tip Hinge (4 1/2-Inch) features a lovely pattern of vines against a stippled background, a decorated barrel and classic ball finials. Made of heavy duty cast iron with a black powder-coated finish, this faithful reproduction has loose pins and slotted and Phillips screws.