As we navigate this unprecedented situation, we continue our goal of providing an exceptional customer experience. If you have any questions or concerns, do not hesitate to contact our customer service team.
House of Antique Hardware is following local, state, and federal guidelines to ensure the safety of our employees and customers.
These deluxe stair rods feature graceful urn-shaped finials. Made entirely of brass with a durable, plated finish, they're as practical as they are beautiful. The 1/2" diameter hollow tubing comes in 28.5", 36" & 48" lengths, and is easily trimmed to fit your specific needs. 72" rods are available upon request. To get the total length with the finials add 2 1/2" to the rod length. The rod has a clearance of .6" from the mounting surface. Each set consists of one hollow rod, two brackets with finials and all mounting screws.
This stair accessory is for decorative purposes only.It is not designed to serve as the sole means of holding a carpet runner in place. All runners should be tacked down securely prior to installing the stair rods.
The stair rod length should be at least 1 1/2" greater than the width of your carpet due to 3/4" of the rod fitting into each of the brackets. The rods can be cut down to whatever size is needed. Learn about hardware >
Product Videos
Reviews
Product Q & A
Adding Items to Cart...
Step 1 Choose Your Function
Passage
Complete non-locking latch set used on most interior doors
Privacy
Complete locking latch set for bedroom and bathroom doors
Double Dummy
Non-latching set with two handles for non-bored closet and double doors
Single Dummy
Non-latching handle for non-bored closet and pantry doors
Step 2 Choose Your Backset
The "backset" is the distance from the edge of your door to the center of the hole bored in your door. Choose from 2⅜" (standard) or 2¾". Measure carefully to ensure proper fit.
or
Choosing a Keying Option for Your Entry Door Set
Single Cylinder Lock:
Key operated from the outside, thumbturn operated from the inside.
Double Cylinder Lock:
Key operated from both inside and outside. Note: Key required for egress.
How to Determine Your Backset
The "backset" is the distance from the edge of your door to the center of the hole bored in your door. Choose from 2⅜" (standard) or 2¾". Measure carefully to ensure proper fit.
or
How to Determine Your Backset
The "backset" is the distance from the edge of your door to the center of the hole bored in your door. Choose from 2½" or 2¾". Measure carefully to ensure proper fit.
or
How to Determine Handing
Stand in the frame of the door with your back to the hinges. If the door swings to your right, it is a RIGHT HAND door. If the door swings to your left, it is a LEFT HAND door.
RIGHT HANDED (RH)
LEFT HANDED (LH)
How to Determine Handing
Stand in the frame of the door with your back to the hinges. If the door swings to your right, it is a RIGHT HAND door. If the door swings to your left, it is a LEFT HAND door.