Decorative steeple tips make these elegant hinges an attractive addition to cabinets, armoires, and wardrobes alike. The tightly fitted, sturdy 1/8-inch thick leaves of solid extruded brass offer long-lasting quality. Choose from three popular finishes.

Understated elegance is yours by adding a unique and authentic turn-of-the-century touch to your home. Our classic octagonal knobs, made of vintage inspired milk glass paired with sturdy brass, will add a fresh look to your home. This delicate 1 1/8-inch knob is perfectly scaled for small cabinet doors, drawers, interior shutters, or anywhere a petite knob is required. Choose from four popular finishes.

These Brass and Copper Shutter Bullet Catches are an alternative to traditional shutter hold backs. Mounted to the wall and to the back of the shutter, they leave the front completely free of hardware. Use one for each shutter.

Our Ball-Tip Cabinet Hinges (2 1/2-Inch X 2-Inch) give a classic touch to any kitchen. Finely crafted from high-strength, extruded brass, these full-mortise joints will last a lifetime. Choose from an array of traditional finish options.

This fine reproduction of a late 18th century Colonial-style 3 1/2-inch center-to-center pull is a stylish addition to any bureau, chest, or table. Made of solid brass, it features double-ringed, round rosettes with a smooth, swan neck handle. It’s suited for use on new furniture, or as a replacement for a worn or damaged piece. Choose from an unlacquered or antique-brass finish.

The classic and versatile 3 1/2-inch ball tip door hinge has been a favorite since the late 19th century. Our authentic reproduction hinge has a loose pin with attached finial, slotted and Phillips wood screws, and heavy duty 1/8-inch thick leaves - just like the originals. Made of heavy duty cast iron with a lacquered finish.

Our tailored New York back plate has timeless appeal. Whether your style is Victorian, Craftsman, or Mid-Century modern, this spare, beveled design will fit right in. Designed for use on the interior side of a door, it includes a crescent thumb turn to activate the privacy mortise lock from the inside the room. While the originals were typically made of stamped brass or copper, this heavy-duty reproduction is forged from solid brass. Choose from five classic finishes.

Elegant simplicity perfectly describes this classic New York door set. The crisply tailored plates and brilliant octagonal knobs proclaim your refined taste, whether your style is Victorian, Craftsman or Classical in tone. Finely crafted for your home of forged brass and crystal glass.

Our premium quality forged brass switchplates are both elegant and durable. Traditionally styled with crisp beveled edges, this classic toggle switchplate will compliment every style of decor. 4 1/2-inch H x 8-inch W.

Parliament-style 2 1/2 x 4 1/2-inch hinges have been a favorite since the late 19th century. Our authentic reproduction is made of sturdy, solid brass, and features classic ball finials and a removable stainless-steel pin that repels rust. Ideal for deep set casement windows, it comes in your choice of four popular finishes.

This New York style back plate is designed for the interior side of a bedroom or bathroom door. It features a classic crescent thumb to activate the privacy mortise lock from inside the room. Made of solid, wrought brass in 4 finishes.

With a 3 1/4-inch offset, these traditional arch-top pintles are suited for brick or stone houses. Use them to replace worn or damaged pintles, or to build your own custom sized shutter hinges (straps sold separately). Made of heavy-duty galvanized cast iron with a rust-resistant powder-coated finish.

With a central circle detail supported by a broad curve, this bracket is an all-around choice for your shelves, fitting with any style. Made from a heavy cast iron with a matte black finish.

Use these traditional tapered shutter straps to replace worn or missing parts, or to build shutter hinges for your specific needs (mounting pintles sold separately). They are designed to work with 7/16-inch diameter pintles and have a 3/4-inch offset. Made of heavy-duty galvanized steel with rust-resistant and powder-coated finish.

Our 8-Inch Light-Duty Surface Bolt, featuring a slim design and small round knob, is great for windows, cabinets and light interior doors. The bolt is a solid-brass half-rod, and the guides are made of wrought brass. Tension springs within each guide hold the bolt in any position. This light-duty surface bolt is available in an array of classic finish options.

Our Casement Latch with Bulb Handle delivers smooth function and long-lasting wear. Extra thick and heavy-duty, it's a good choice for large windows. Forged in solid brass, it is left unlacquered, allowing it to age gracefully over time just like the antique originals. With its unique reversible handle and two strike options (mortise and surface), it's a wonderful latch for cabinets, gates or shutters as well!

A simple, round rosette is an elegant backdrop to many styles of door knobs. This low-profile design, which steps down slightly around the outside to create a subtle border, is re-cast from a circa 1920 antique original. Due to the screw hole positioning, it will not work on doors pre-drilled with a 2 1/8-inch bore.

This simple door set pairs plain round knobs with elegant, beaded rosettes, adding a classic touch to any door. The hollow, yet sturdy knobs are made of solid wrought brass and the rosettes are beautifully crafted from solid, forged brass. This traditional ensemble is available in an array of popular finishes from polished nickel to oil-rubbed bronze, giving you plenty of options for every room in the house. For use with both pre- and non-bored doors.

This classic stamped brass rosette is exactly like those found in American homes of the 1910s and 20s. The shapely profile, 3 screw holes & matching slotted screws make it a great choice for exacting restorations or new vintage style construction.

Our tailored New York back plate has timeless appeal. Whether your style is Victorian, Craftsman, or Mid-Century modern, this spare, beveled design will fit right in. While the originals were typically made of stamped brass or copper, this heavy-duty reproduction is forged from solid brass. Available in your choice of five classic finishes.

Authentic colonial style and a rough black finish make these classic New York strap hinges a great choice for period restorations. These very sturdy hinges lift off for easy maintenance and have a 2 1/4-inch offset (4 1/2-inch throw). Made from 1/4-inch thick cast iron, they are powder coated to resist rust.

The heavily textured version of our Early American bean-tip strap hinge is ideal for rustic, plank-style doors. This versatile design with loose pin and reversible pad allows for full or half-surface application. For doors up to 175lbs.

Austere porcelain knobs are the perfect compliment to this tailored and understated New York mortise lock set. Whether your style is Victorian, Craftsman, or Colonial-Revival, this classic design will be the perfect period accent for your doors. Finely crafted for your home in lasting and durable forged brass.