These bold sunflower shutter dogs will add a cheery outlook to any home. Made of heavy duty cast iron, they're finished with a rust resistant black powder coat. Easily mounted to wood (with blocking) or masonry with the included lag bolt.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (5-Inch x 3-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

Our Premium Spot Number-8 Sash Cord is typically used for counterbalance systems on double-hung windows. Made of premium-quality cotton yarn, a nylon fiber core gives it added strength and durability with a coating that is chemical, weather and heat resistant. It is suited for use on new construction, or for updating a worn or damaged system.

This cast iron finger lift is as strong as it looks. The rugged texture and thick profile go wonderfully with hand forged colonial, Tudor or Mediterranean style hardware. Antiqued and lacquered.

Our Small S-Hooks are ideal for attaching weights to the sash chains on smaller double-hung windows. Made of solid steel, they are designed for long-lasting wear. Used to attach chains to weights with a hole through the center running from top to bottom.

This wonderfully whimsical rat tail latch is based on an authentic colonial era design. It's made of heavy-duty cast iron with a durable black powder coat to prevent rust. Includes both mortise and surface strikes.

This simple Victorian sash window stay is solid cast iron and measures 2 1/2-inch by 2-inch

True classics, these scroll design shutter dogs are an elegant choice for any style of home. Made of heavy-duty galvanized steel, they feature a durable black powder coated finish.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (5 1/2-Inch x 3 1/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

Parliament-style 2 1/2 x 3 1/2-inch hinges have been a favorite since the late 19th century. Our authentic reproduction is made of sturdy, solid brass, and features classic ball finials and a removable stainless-steel pin that repels rust. Ideal for deep set casement windows, it comes in your choice of four popular finishes.

An easy-grip ball handle adds an authentic look to our Cast-Iron Surface Door or Shutter Bolt. Ideal for colonial or other rustic home styles, it has a textured surface and durable black powder-coat finish. Three strike plate options allow it to be used on a variety of applications from gates and doors to cabinets.

Our authentic Colonial style 6 3/8-inch slide bolt offers reliable holding power for your doors, gates or shutters. Forged from heavy duty iron 3/16-inch in thickness, it's finished with a rough textured powder-coat.

When security is a priority, this heavy duty shutter bolt does the job. Crafted from 1/4-inch thick cast iron, it's as strong as they come. Finished with a black powder coat.

This charming Set of Clarks Tip Black Cast-Iron Shutter Hinges (3 1/4-inch throw), were commonly found on Victorians and early 20th century Colonials. Intended for flush applications, they are surface mounted and lift off, making it easy to install or remove your shutters. Features a rust resistant, powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two fasteners - enough to complete one window.

These Brass and Copper Shutter Bullet Catches are an alternative to traditional shutter hold backs. Mounted to the wall and to the back of the shutter, they leave the front completely free of hardware. Use one for each shutter.

With a rustic, yet refined presence, our Solid-Bronze Curved Casement Fastener suits a variety of interiors. The hand-applied finish ages gracefully, with frequently touched areas exposing the natural shades of the bronze, while other areas oxidize further. The result? An elegant and timeless display of contrasting color variations. Handcrafted from the finest-quality materials, each piece has its own, unique character.

Premium stainless steel retaining clip set designed for wood screens or storm sashes that need to stay shut tight for the season. Each set includes two retaining clips with mounting bolts and wing nuts - enough for one sash.

Rugged meets refined in these classic scroll design shutter dogs. With their elegant profile and hammered texture they beautifully compliment any style of home. Made of heavy duty cast iron, galvanized and finished with a rust resistant black powder coat. Designed for wood siding.

Use these shutter straps to replace worn or missing parts, or to build shutter hinges for your specific needs (mounting pintles sold separately). Made of heavy duty stainless steel which is powder coated black.

Our 9 1/2-Inch Casement Stay delivers smooth function and long-lasting wear. The handle is approximately 3/8-inch thick - ideal for large or heavy windows. It comes complete with two sill mounted keepers and holes for three opening positions. Forged in solid brass, it is left unlacquered, allowing it to age gracefully over time, just like the antique originals. A great choice for Colonial, Tudor, or Spanish-style homes.

Bring Victorian style to your decor with our authentic reproduction shutter bar. As versatile as it is functional, this ornate latch is ideal for securing a variety of interior window shutter types, as well as cabinet, bi-fold, and other lightweight doors. Crafted from solid brass, it comes in our exclusive Antique by-Hand finish which ages gracefully over time into a beautiful natural patina. Reversible for both left and right hands.

This plated steel transom window chain is a low cost alternative to solid brass chains. Use this chain on one or both sides of a bottom-hinged, inswing window.

Get the look of functional hardware with these dummy tie backs. Intended for use with fixed shutters (wood or vinyl), they'll give your windows an authentic appearance. Made of heavy duty cast iron, galvanized and finished with a rust resistant black powder coat.

Sargent & Co., patented the design of hook-style sash lift on October 31, 1871. The ornate pattern is so lovely, you'll hate to cover it with curtains! Reproduced in cast iron from a bronze original. Lacquered.