Our 9 1/2-Inch Casement Stay in Antique-By-Hand delivers smooth function and long-lasting wear. The handle is approximately 3/8-inch thick - ideal for large or heavy windows. It comes complete with two sill mounted keepers and holes for four opening positions. Forged in solid brass, it comes in our exclusive, living finish that ages gracefully over time into a beautiful natural patina. A great choice for Colonial, Tudor, or Spanish-style homes.

Our heavy-duty, cast iron sash lock is a House of Antique Hardware exclusive! This distinctive design, with its tall half-cup keeper, is the type found in early 20th century schools, offices and commercial buildings, as well as fine homes. Made of durable cast iron with a weathered and lacquered antique finish, it locks your windows tightly. Over time humidity and use may cause the lacquer to wear, allowing natural and desirable aging to occur.

Pair of cast iron Bahama shutter hinges. These hinges are powder coated black and are flush mounted. The pintles and straps have a 3/4 inch offset. 

With a rustic, yet refined presence, our Solid-Bronze Sash Lift suits a variety of interiors. The hand-applied finish ages gracefully, with frequently touched areas exposing the natural shades of the bronze, while other areas oxidize further. The result? An elegant and timeless display of contrasting color variations. Handcrafted from the finest-quality materials, each piece has its own, unique character.

With its beveled edge and oval insert, this simple design works equally well with Craftsman or Modern interiors. The low profile is great for windows with blinds or shutters. Stamped brass with our living antique finish.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (5 1/2-Inch x 3 1/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

A House of Antique Hardware exclusive! This large and rustic casement latch has a wonderful, old-world charm. Made of heavy duty cast iron, it's especially well suited to Colonial, Tudor and Spanish style homes. Choose from durable matte black, lacquered antique iron or rusted iron finishes.

With a 1 1/2-inch offset, these traditional arch-top pintles are suited for brick veneered homes. Use them to replace worn or damaged pintles, or to build your own custom sized shutter hinges (straps sold separately). Made of heavy-duty galvanized cast iron with a rust-resistant powder-coated finish.

These full-mortise 6 x 3-inch shutter hinges have a unique curved offset that allows you to throw the shutter clear of the window. Made of heavy-duty forged iron with a rough textured surface, they are a great choice for Colonial or Romantic style homes. The surface is phosphate treated then lacquered, for rust-resistant, long-lasting wear.

This extra heavy-duty shutter bolt is as strong as they come. Made of rust-resistant stainless steel with a durable black powder coat, it will withstand the elements, season after season. The classic colonial styling goes with any traditional or rustic home.

Our 3/4-Inch Chain Spirals are ideal for attaching sash chains to your double-hung sash windows. Without using screws, which could cause damage, the spiral fits within the existing mortise at the side of the window sash where the original sash cord was located. Made of solid steel, they are designed for long-lasting wear.

Our 11 1/2-Inch Casement Stay in Antique-By-Hand delivers smooth function and long-lasting wear. The handle is approximately 3/8-inch thick - ideal for large or heavy windows. It comes complete with two sill mounted keepers and holes for five opening positions. Forged in solid brass, it comes in our exclusive, living finish that ages gracefully over time into a beautiful natural patina. A great choice for Colonial, Tudor, or Spanish-style homes.

Get the look of functional hardware with these dummy tie backs. Intended for use with fixed shutters (wood or vinyl), they'll give your windows an authentic appearance. Made of heavy duty cast iron, galvanized and finished with a rust resistant black powder coat.

Get the look of a functional shutter hinge with these classic dummies. They are ideal for wood or vinyl shutters that are mounted directly to the wall - simply attach them with wood screws to the side of the panel. Made of heavy-duty galvanized steel and finished with a durable black powder coated finish.

These charming, acorn tip hinges were commonly found on Victorians and early 20th century colonials. The hinges are surface mounted and lift off, making it easy to install or remove your shutters. The 3 1/4-inch throw is optimal for brick veneered homes.

Our Pair of 1 3/4-inch Offset Suffolk-Style L Hinges with Narrow Plate Pintles offer traditional Colonial style. Constructed from stainless steel, they feature a rust-resistant and durable black powder-coated finish. They can be mounted to show either when the shutters are open or closed.

This premium, solid-brass 12-inch casement stay delivers smooth function and long-lasting wear. The traditional-style, knurled knob lets you open, close, and secure your vintage, outswing casement windows with ease. It features beveled mounting plates is reversible for left or right handing, and comes hand-finished with our living antique patina.

Our 9 1/2-Inch Casement Stay delivers smooth function and long-lasting wear. The handle is approximately 3/8-inch thick - ideal for large or heavy windows. It comes complete with two sill mounted keepers and holes for three opening positions. Forged in solid brass, it is left unlacquered, allowing it to age gracefully over time, just like the antique originals. A great choice for Colonial, Tudor, or Spanish-style homes.

Our Pair of 1-inch Offset Suffolk-Style 12-inch Strap Hinges with Rectangular Plate Pintles offer traditional Colonial style. Constructed from galvanized steel, they feature a rust-resistant and durable black powder-coated finish. They can be mounted to show either when the shutters are open or closed.

With a rustic, yet refined presence, our Solid-Bronze Casement Stay (12 3/4-Inch) suits a variety of home styles. The hand-applied finish ages gracefully, with frequently touched areas exposing the natural shades of the bronze, while other areas oxidize further. The result? An elegant and timeless display of contrasting color variations. Handcrafted from the finest-quality materials, each piece has its own, unique character.

Sargent & Co., patented the design of hook-style sash lift on October 31, 1871. The ornate pattern is so lovely, you'll hate to cover it with curtains! Reproduced in cast iron from a bronze original. Lacquered.

These premium shutter hinges are a great choice for use in coastal regions, forged from 304 stainless steel. Both straps and pintles are powder coated black to give a traditional look. The hinges lift off and are reversible, making installation and maintenance simple. Made in USA.

Use these rustic New York style shutter straps to replace worn or missing parts, or to build shutter hinges for your specific needs (mounting pintles sold separately). Designed to work with 3/8-inch diameter pintles, they have a 2 1/4-inch offset. Made of galvanized steel.

Slide bolts are a smart and easy way to secure your shutters while adding decorative charm. Simple and elegant, the New York 8 inch slide bolt has a classic look that works well with different architectural styles, blending nicely with your stylish shutter hardware. Constructed from galvanized carbon steel, this durable bolt is built to last.