Parliament-style 2 1/2 x 3 1/2-inch hinges have been a favorite since the late 19th century. Our authentic reproduction is made of sturdy, solid brass, and features classic ball finials and a removable stainless-steel pin that repels rust. Ideal for deep set casement windows, it comes in your choice of four popular finishes.

Our premium quality transom chain is durable, non-corrosive and long-lasting. Made of solid brass, it's hand-finished with our exclusive antique patina. Use this chain on one or both sides of a bottom-hinged, inswing window.

This plated steel transom window chain is a low cost alternative to solid brass chains. Use this chain on one or both sides of a bottom-hinged, inswing window.

These bold sunflower shutter dogs will add a cheery outlook to any home. Made of heavy duty cast iron, they're finished with a rust resistant black powder coat. Easily attached to wood siding with the included mounting plate and post.

Our heavy-duty, cast iron sash lock is a House of Antique Hardware exclusive! This distinctive design, with its tall half-cup keeper, is the type found in early 20th century schools, offices and commercial buildings, as well as fine homes. Made of durable cast iron with a weathered and lacquered antique finish, it locks your windows tightly. Over time humidity and use may cause the lacquer to wear, allowing natural and desirable aging to occur.

Pair of cast iron Bahama shutter hinges. These hinges are powder coated black and are flush mounted. The pintles and straps have a 3/4 inch offset. 

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (5 1/2-Inch x 3 1/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

Our 3/4-Inch Chain Spirals are ideal for attaching sash chains to your double-hung sash windows. Without using screws, which could cause damage, the spiral fits within the existing mortise at the side of the window sash where the original sash cord was located. Made of solid steel, they are designed for long-lasting wear.

These charming, acorn tip hinges were commonly found on Victorians and early 20th century colonials. The hinges are surface mounted and lift off, making it easy to install or remove your shutters. The 3 1/4-inch throw is optimal for brick veneered homes.

This premium, solid-brass 12-inch casement stay delivers smooth function and long-lasting wear. The traditional-style, knurled knob lets you open, close, and secure your vintage, outswing casement windows with ease. It features beveled mounting plates is reversible for left or right handing, and comes hand-finished with our living antique patina.

Our Number-8 Cotton Sash cord with Galvanized Cable is typically used for counterbalance systems on double-hung windows. Made of premium-quality cotton yarn, its wire core adds strength and durability. It is suited for use on new construction, or for a worn or damaged system. Sold by the foot.

Sargent & Co., patented the design of hook-style sash lift on October 31, 1871. The ornate pattern is so lovely, you'll hate to cover it with curtains! Reproduced in cast iron from a bronze original. Lacquered.

This medium sized, lever handle casement latch is made of solid, non-corrosive brass. The handle and base are riveted for extra strength, making this a fine choice for large or hard to close windows. Finished with our exclusive living patina, it includes 2 strikes, one for mortise and one for rim mounting. Determined from the outside, this latch is for windows hinged on the left.

Reading Hardware originally created this lovely sash lift as part of their extensive Windsor hardware pattern. We've reproduced the circa 1885 Aesthetic design in durable cast brass, perfectly capturing the delicate pattern of waves and flowers. Hand-finished with our living antique patina, it will age gracefully, developing highlights with use.

Solid brass sash stop bead adjusters are a great alternative to using screws or nails to fasten the sash stops, and allow for easy removal and adjustment. These premium grade fasteners secure the stops and allow easy removal for refinishing, repairs, and periodic adjustment of wooden sash windows should they become difficult to operate due to seasonal weather changes.

This pair of lightweight and sturdy stays is designed for medium to large Bahama or Bermuda shutters and made out of aluminum to avoid rust

Reading Hardware originally created this lovely sash lift as part of their extensive Windsor hardware pattern. We've reproduced the circa 1885 Aesthetic design in durable cast iron, perfectly capturing the delicate pattern of waves and flowers. Choose from matte black powder coat or lacquered antique iron finishes.

Our C-Hooks are ideal for attaching weights to the sash chains on your double-hung windows. Made of solid steel, they are designed for long-lasting wear. Used to attach chains to old style weights with a hole on the top.

Cast from heavy-duty, solid brass, this sturdy Transom Window Latch Hook In Antique-By-Hand will open and close your window with ease. The 1/2 inch diameter button fits into the loop on the transom catch, allowing you to push or pull the loop as needed to disengage the catch. Fits a 7/8-inch diameter pole. The hook is hand-finished with our exclusive antique patina.

Our 7/8-Inch Chain Spirals are ideal for attaching sash chains to your double-hung sash windows. Without using screws, which could cause damage, the spiral fits within the existing mortise at the side of the window sash where the original sash cord was located. Made of solid steel, they are designed for long-lasting wear.

These Bahama or Bermuda shutter hinges are powder coated black and are offset mounted. The pintles have a 1 inch offset and the hinges are offset by 1/2 inch.

This charming Set of Clarks Tip Black Cast-Iron Shutter Hinges (3 1/4-inch throw), were commonly found on Victorians and early 20th century Colonials. Intended for flush applications, they are surface mounted and lift off, making it easy to install or remove your shutters. Features a rust resistant, powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two fasteners - enough to complete one window.

Cast from heavy-duty, solid brass, this sturdy Transom Window Latch Hook in Lacquered Brass will open and close your window with ease. The 1/2 inch diameter button fits into the loop on the transom catch, allowing you to push or pull the loop as needed to disengage the catch. Fits a 7/8-inch diameter pole.

These brackets made of plastic and stainless steel can be used with all of our lag mount shutter dogs. Fits up to a 3/8-inch diameter lag bolt and is easy to adjust. The brackets hold the shutter panel and dog together firmly to reduce rattling in the wind.