The design for this distinctive hook-style sash lock dates to the 1870s. The crisp Eastlake pattern is just as fresh and appealing today. Reproduced in solid, cast iron with a lacquered finish.

This pair of lightweight and sturdy stays is designed for smaller to medium Bahama or Bermuda shutters and made out of aluminum to avoid rust

traditionally styled, our crescent sash Lock goes with homes of every era. Made from solid brass, and hand-finished with our living antique patina! Ideal for sash or hung windows.

This Large Casement Latch in Antique-By-Hand is made of solid, non-corrosive brass. The handle and base are riveted for extra strength, making it a fine choice for large or hard to close windows. It comes in our exclusive Antique by-Hand - a finish that ages gracefully over time into a beautiful natural patina. Includes three strike plate options.

Bring Victorian style to your decor with our authentic reproduction shutter bar. As versatile as it is functional, this ornate latch is ideal for securing a variety of interior window shutter types, as well as cabinet, bi-fold, and other lightweight doors. Crafted from solid brass, it comes in our exclusive Antique by-Hand finish which ages gracefully over time into a beautiful natural patina. Reversible for both left and right hands.

This charming Eastlake style sash lift is reproduced from an 1880s original. Made of cast iron, the pattern is crisp and geometric, with a single iris flower at center. Large and durable, it's a good choice for tall or broad sash windows. Offered with a matte black powdercoat or a lacquered antique finish.

Hook style sash lifts are a perennial favorite. The simple, beveled edge design dates from the Victorian era, but works with everything from Colonial Revival to Mid-Century Modern. Made of stamped sheet brass with our living antique finish.

This simple Victorian sash window stay is solid cast iron and measures 2 1/2-inch by 2-inch

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (6 1/2-Inch x 3 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

Right out of the late Victorian era, this elegant sash lift showcases its iconic fleur-de-lis design. Reproduced in cast iron, it comes in your choice of two classic finishes.

square and simple in design, our versatile transom latch goes with everything, from Victorian to Mid-Century Modern. The circa 1900 design features all brass parts. The latch housing is stamped sheet brass, while the tongue, hook loop and strike plate are solid, cast brass. Hand-finished with our living antique patina! This spring-loaded latch is typically installed at the top of the window sash and operated with a pull chain or pole-mounted transom hook (use transom chains to keep the sash from falling open). The base of the strike is mounted to the inside of the window frame and the catch portion protrudes over the sash, in order to engage the latch.

Our Number-8 Cotton Sash is typically used for counterbalance systems on double-hung windows. Made of quality cotton yarn, it features a polyester fiber core, giving it added strength and durability and an interlocked polished solid braid to resist rot, mildew,and wear. It is suited for use on new construction, or for updating a worn or damaged system.

Parliament-style 2 1/4 x 3-inch hinges have been a favorite since the late 19th century. Our authentic reproduction is made of sturdy, solid brass, and features classic ball finials and a removeable stainless-steel pin that repels rust. Ideal for deep set casement windows, it comes in our exclusive Antique by-Hand - a finish that ages gracefully over time into a beautiful natural patina.

These charming, acorn tip hinges were commonly found on Victorians and early 20th century colonials. The hinges are surface mounted and lift off, making it easy to install or remove your shutters. The 1 1/4-inch throw is intended for flush applications.

The design for this distinctive hook-style sash lock dates to the 1870s. The crisp Eastlake pattern is just as fresh and appealing today. Reproduced in solid, cast iron with a black powder coated finish.

Plated steel transom window chain with solid brass mounting brackets. Use this chain on one or both sides of a bottom-hinged, inswing window. Chain comes in 15-inch length which can be shortened by removing chain links.

The Filigree 4-foot cremone bolt is both functional and decorative, and its raised patterns reflect Classical and Victorian influences. Made from solid brass, it is available in our Antique-By-Hand finish which ages gracefully over time. It is ideal for smaller casement windows, cabinets, and furniture.

This medium sized, lever handle casement latch is made of solid, non-corrosive brass. The handle and base are riveted for extra strength, making this a fine choice for large or hard to close windows. Includes 2 strikes, one for mortise and one for rim mounting, and comes in a variety of classic finishes. Determined from the outside, this latch is for windows hinged on the left.

This medium sized, lever handle casement latch is made of solid, non-corrosive brass. The handle and base are riveted for extra strength, making this a fine choice for large or hard to close windows. Includes 2 strikes, one for mortise and one for rim mounting, and comes in a variety of classic finishes. Determined from the outside, this latch is for windows hinged on the right.

Our Small S-Hooks are ideal for attaching weights to the sash chains on smaller double-hung windows. Made of solid steel, they are designed for long-lasting wear. Used to attach chains to weights with a hole through the center running from top to bottom.

This sturdy, barrel style transom latch is made of heavy-duty cast brass. The shaft is spring-loaded for vertical installation and keeps the window tightly fastened.
This latch is typically installed at the top of the window sash and operated with a pull chain or pole-mounted transom hook (use transom chains to keep the sash from falling open). Hand-finished with our living antique patina!

This narrow, replacement sash lock catch is designed for modern double hung wood windows with insulated glass. Only 7/16-inch in width, it fits on some Marvin windows (not all), and other brands with a non-beveled catch rail. Solid brass.

Our Number-10 Cotton Sash cord with Galvanized Cable is typically used for counterbalance systems on double-hung windows. Made of premium-quality cotton yarn, its wire core adds strength and durability. It is suited for use on new construction, or for a worn or damaged system. Sold by the foot.

This set of Acme Cast-Iron Mortise Shutter Hinges (9-Inch x 3 15/16-Inch) contains everything you need to hang one pair of shutters. The mid-Victorian design features a unique, patented pintle that keeps shutters securely in place. Heavy-duty and authentic.