As we navigate this unprecedented situation, we continue our goal of providing an exceptional customer experience. If you have any questions or concerns, do not hesitate to contact our customer service team.
House of Antique Hardware is following local, state, and federal guidelines to ensure the safety of our employees and customers.
Update: 06/22/2020
We want to thank those that helped House of Antique Hardware donate 255,445 meals as part of our community promotion. This donation allowed the Oregon Food Bank to provide thousands of families, in need, with meals.
This pair of lightweight and sturdy stays is designed for medium to large Bahama or Bermuda shutters and made out of aluminum to avoid rust. This set comes with brass pins for attaching the rod to the brackets when the shutter is held open. When the shutter is to be closed during a storm the rods can be removed and the brackets locked together to keep the shutter fastened. The bars can also be cut to smaller lengths if desired. Optional sill mount brackets are included with this set. The stay rods measure 15/16" in diameter and the brackets are 3 9/16" long by 1 3/16" in width and project 1 1/2".
Bahama shutters, also known as Bermuda shutters, are exterior shutters with louvers that are hinged at the top and are opened to let in air but still block sunlight. Learn about hardware >
Product Videos
Reviews
Product Q & A
Adding Items to Cart...
Step 1 Choose Your Function
Passage
Complete non-locking latch set used on most interior doors
Privacy
Complete locking latch set for bedroom and bathroom doors
Double Dummy
Non-latching set with two handles for non-bored closet and double doors
Single Dummy
Non-latching handle for non-bored closet and pantry doors
Step 2 Choose Your Backset
The "backset" is the distance from the edge of your door to the center of the hole bored in your door. Choose from 2⅜" (standard) or 2¾". Measure carefully to ensure proper fit.
or
Choosing a Keying Option for Your Entry Door Set
Single Cylinder Lock:
Key operated from the outside, thumbturn operated from the inside.
Double Cylinder Lock:
Key operated from both inside and outside. Note: Key required for egress.
How to Determine Your Backset
The "backset" is the distance from the edge of your door to the center of the hole bored in your door. Choose from 2⅜" (standard) or 2¾". Measure carefully to ensure proper fit.
or
How to Determine Your Backset
The "backset" is the distance from the edge of your door to the center of the hole bored in your door. Choose from 2½" or 2¾". Measure carefully to ensure proper fit.
or
How to Determine Handing
Stand in the frame of the door with your back to the hinges. If the door swings to your right, it is a RIGHT HAND door. If the door swings to your left, it is a LEFT HAND door.
RIGHT HANDED (RH)
LEFT HANDED (LH)
How to Determine Handing
Stand in the frame of the door with your back to the hinges. If the door swings to your right, it is a RIGHT HAND door. If the door swings to your left, it is a LEFT HAND door.
At House of Antique Hardware