This plated steel transom window chain is a low cost alternative to solid brass chains. Use this chain on one or both sides of a bottom-hinged, inswing window.

Get the look of functional hardware with these dummy tie backs. Intended for use with fixed shutters (wood or vinyl), they'll give your windows an authentic appearance. Made of heavy duty cast iron, galvanized and finished with a rust resistant black powder coat.

Our Number-8 Cotton Sash is typically used for counterbalance systems on double-hung windows. Made of quality cotton yarn, it features a polyester fiber core, giving it added strength and durability and an interlocked polished solid braid to resist rot, mildew,and wear. It is suited for use on new construction, or for updating a worn or damaged system.

These premium stainless steel bullet catches are an alternative to traditional shutter hold backs. Mounted to the wall and to the back of the shutter, they leave the front completely free of hardware. Contains enough hardware for one window.

These charming, acorn tip hinges were commonly found on Victorians and early 20th century colonials. The hinges are surface mounted and lift off, making it easy to install or remove your shutters. The 1 1/4-inch throw is intended for flush applications.

Adorned with intricate patterns, this 4-foot French-style Floral Cremone Bolt is as lovely as it is functional. Cast in solid brass, a charming flower graces the knob, while the case and guides feature classic acanthus leaf motifs. Available in our Antique-By-Hand finish which ages gracefully over time. It’s a lovely way to upgrade smaller casement windows, cabinets, and furniture.

Rugged meets refined in these large size classic scroll design shutter dogs. With their elegant profile and hammered texture they beautifully compliment any style of home. Made of heavy duty cast iron, finished with a rust resistant black powder coat. Designed for masonry applications.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (5-Inch x 3-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

Our 11 1/2-Inch Casement Stay in Antique-By-Hand delivers smooth function and long-lasting wear. The handle is approximately 3/8-inch thick - ideal for large or heavy windows. It comes complete with two sill mounted keepers and holes for five opening positions. Forged in solid brass, it comes in our exclusive, living finish that ages gracefully over time into a beautiful natural patina. A great choice for Colonial, Tudor, or Spanish-style homes.

This stately Regency-style 4-foot cremone bolt has a timeless quality - the design's classic arches and curves convey a dignified feel. Crafted from cast iron, it's a lovely way to upgrade smaller casement windows, cabinets, and furniture.

These charming, acorn tip hinges were commonly found on Victorians and early 20th century colonials. The hinges are surface mounted and lift off, making it easy to install or remove your shutters. The 3 1/4-inch throw is optimal for brick veneered homes.

This medium sized, lever handle casement latch is made of solid, non-corrosive brass. The handle and base are riveted for extra strength, making this a fine choice for large or hard to close windows. Includes 2 strikes, one for mortise and one for rim mounting, and comes in a variety of classic finishes. Determined from the outside, this latch is for windows hinged on the right.

Our C-Hooks are ideal for attaching weights to the sash chains on your double-hung windows. Made of solid steel, they are designed for long-lasting wear. Used to attach chains to old style weights with a hole on the top.

Our 7/8-Inch Chain Spirals are ideal for attaching sash chains to your double-hung sash windows. Without using screws, which could cause damage, the spiral fits within the existing mortise at the side of the window sash where the original sash cord was located. Made of solid steel, they are designed for long-lasting wear.

These brackets made of plastic and stainless steel can be used with all of our lag mount shutter dogs. Fits up to a 3/8-inch diameter lag bolt and is easy to adjust. The brackets hold the shutter panel and dog together firmly to reduce rattling in the wind.

Cast from heavy-duty, solid brass, this sturdy Transom Window Latch Hook In Antique-By-Hand will open and close your window with ease. The 1/2 inch diameter button fits into the loop on the transom catch, allowing you to push or pull the loop as needed to disengage the catch. Fits a 7/8-inch diameter pole. The hook is hand-finished with our exclusive antique patina.

Our Premium Spot Number-10 Sash Cord is typically used for counterbalance systems on double-hung windows. Made of premium-quality cotton yarn, a nylon fiber core gives it added strength and durability with a coating that is chemical, weather and heat resistant. It is suited for use on new construction, or for updating a worn or damaged system.

This set of Acme Cast-Iron Mortise Shutter Hinges (9-Inch x 3 15/16-Inch) contains everything you need to hang one pair of shutters. The mid-Victorian design features a unique, patented pintle that keeps shutters securely in place. Heavy-duty and authentic.

This narrow, replacement sash lock catch is designed for modern double hung wood windows with insulated glass. Only 7/16-inch in width, it fits on some Marvin windows (not all), and other brands with a non-beveled catch rail. Solid brass.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (3 3/4-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

Style meets utility with this unique, late 19th-century combination sash lock and lift. The spring loaded function makes it easy to unlock, lift, lower, and lock any window sash. Made of forged bronze, it comes in our exclusive Antique-By-Hand, a living finish that ages gracefully over time into a beautiful natural patina.

These large and finely cast scallop design shutter dogs are ideal for coastal homes. Made of heavy duty cast iron, they're finished with a rust resistant black powder coat. Easily mounted to wood or masonry with the included lag bolt.

Our heavy-duty, cast brass sash lock is a House of Antique Hardware exclusive! This distinctive design, with its tall half-cup keeper, is the type found in early 20th century schools, offices and commercial buildings, as well as fine homes. Made of durable, non-rusting cast brass, it holds your windows securely in place. It comes in our exclusive Antique by-Hand finish which ages gracefully over time into a beautiful natural patina.

Premium quality reproduction of Acro numbering tacks 26-50 made of the original white brass alloy. Large, easy to read 1/2-inch diameter head with 5/16-inch long barbed pyramid nail.