This medium sized, lever handle casement latch is made of solid, non-corrosive brass. The handle and base are riveted for extra strength, making this a fine choice for large or hard to close windows. Includes 2 strikes, one for mortise and one for rim mounting, and comes in a variety of classic finishes. Determined from the outside, this latch is for windows hinged on the left.

Our 6-Inch Window Utility Pull is inspired by a classic bar handle - giving your windows and cabinets an old-fashioned charm. Crafted from solid brass, it features two screw holes on each side to provide extra strength for frequent use or heavier furniture. Wherever you use it, this durable pull withstands the test of time.

traditionally styled, our crescent sash Lock goes with homes of every era. Made from solid brass, and hand-finished with our living antique patina! Ideal for sash or hung windows.

Our 3/4-Inch Chain Spirals are ideal for attaching sash chains to your double-hung sash windows. Without using screws, which could cause damage, the spiral fits within the existing mortise at the side of the window sash where the original sash cord was located. Made of solid steel, they are designed for long-lasting wear.

Rugged meets refined in our 6-Inch Classic Hammered-Surface Shutter Dogs. With their elegant profile and hammered texture, they beautifully compliment any style of home. Made of heavy, cast iron, they feature a weather resistant, powder-coated finish. Designed for masonry applications (anchors recommended - not included). Comes complete with lag screws, magnetic holders, and masonry anchors.

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (4 1/2-Inch x 2 7/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

Our heavy-duty Large Traditional Sash Lock is one of the finest on the market. Beautifully made from solid brass, it comes in our exclusive Antique by-Hand - a finish that ages gracefully over time into a beautiful natural patina. Durable and strong enough for larger sashes, its century-old design works with any style of home - truly a classic!

Solid brass sash stop bead adjusters are a great alternative to using screws or nails to fasten the sash stops, and allow for easy removal and adjustment. These premium grade fasteners secure the stops and allow easy removal for refinishing, repairs, and periodic adjustment of wooden sash windows should they become difficult to operate due to seasonal weather changes.

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (5-Inch x 3-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

Our Casement Latch with Bulb Handle in Antique-By-Hand delivers smooth function and long-lasting wear. Extra thick and heavy-duty, it's a good choice for large windows. Forged in solid brass, it comes in our exclusive, living finish that ages gracefully over time into a beautiful natural patina. With its unique reversible handle and two strike options (mortise and surface), it is a wonderful latch for cabinets, gates or shutters as well!

Our heavy-duty, cast iron sash lock is a House of Antique Hardware exclusive! This distinctive design, with its tall half-cup keeper, is the type found in early 20th century schools, offices and commercial buildings, as well as fine homes. Made of durable cast iron with a weathered and lacquered antique finish, it locks your windows tightly. Over time humidity and use may cause the lacquer to wear, allowing natural and desirable aging to occur.

Our 9 1/2-Inch Casement Stay delivers smooth function and long-lasting wear. The handle is approximately 3/8-inch thick - ideal for large or heavy windows. It comes complete with two sill mounted keepers and holes for four opening positions. Forged in solid brass, it is left unlacquered, allowing it to age gracefully over time, just like the antique originals. A great choice for Colonial, Tudor, or Spanish-style homes.

Premium stainless steel hanger set designed for wood screens or storm sashes that need to stay shut tight for the season. Each set includes 2 hooks, 2 hangers and 2 retaining clips with mounting bolts - enough for one sash.

Our Premium Spot Number-8 Sash Cord is typically used for counterbalance systems on double-hung windows. Made of premium-quality cotton yarn, a nylon fiber core gives it added strength and durability with a coating that is chemical, weather and heat resistant. It is suited for use on new construction, or for updating a worn or damaged system.

Our Solid-Brass Handle in Antique-by-Hand (4-Inch Center-to-Center) gives your windows and cabinets old-fashioned charm. This sturdy accent is easy to grip and operate, and a great choice for large or heavy sashes and drawers. Choose from an array of popular finish options.

Our Small S-Hooks are ideal for attaching weights to the sash chains on smaller double-hung windows. Made of solid steel, they are designed for long-lasting wear. Used to attach chains to weights with a hole through the center running from top to bottom.

True classics, these scroll design shutter dogs are an elegant choice for any style of home. Made of heavy-duty galvanized steel, they feature a durable black powder coated finish.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (5 1/2-Inch x 3 1/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

Parliament-style 2 1/2 x 3 1/2-inch hinges have been a favorite since the late 19th century. Our authentic reproduction is made of sturdy, solid brass, and features classic ball finials and a removable stainless-steel pin that repels rust. Ideal for deep set casement windows, it comes in your choice of four popular finishes.

This charming Set of Clarks Tip Black Cast-Iron Shutter Hinges (3 1/4-inch throw), were commonly found on Victorians and early 20th century Colonials. Intended for flush applications, they are surface mounted and lift off, making it easy to install or remove your shutters. Features a rust resistant, powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two fasteners - enough to complete one window.

These Brass and Copper Shutter Bullet Catches are an alternative to traditional shutter hold backs. Mounted to the wall and to the back of the shutter, they leave the front completely free of hardware. Use one for each shutter.

Premium stainless steel retaining clip set designed for wood screens or storm sashes that need to stay shut tight for the season. Each set includes two retaining clips with mounting bolts and wing nuts - enough for one sash.

Rugged meets refined in these classic scroll design shutter dogs. With their elegant profile and hammered texture they beautifully compliment any style of home. Made of heavy duty cast iron, galvanized and finished with a rust resistant black powder coat. Designed for wood siding.

Our 9 1/2-Inch Casement Stay delivers smooth function and long-lasting wear. The handle is approximately 3/8-inch thick - ideal for large or heavy windows. It comes complete with two sill mounted keepers and holes for three opening positions. Forged in solid brass, it is left unlacquered, allowing it to age gracefully over time, just like the antique originals. A great choice for Colonial, Tudor, or Spanish-style homes.