Cast from heavy-duty, solid brass, this sturdy Transom Window Latch Hook in Lacquered Brass will open and close your window with ease. The 1/2 inch diameter button fits into the loop on the transom catch, allowing you to push or pull the loop as needed to disengage the catch. Fits a 7/8-inch diameter pole.

Our 7/8-Inch Chain Spirals are ideal for attaching sash chains to your double-hung sash windows. Without using screws, which could cause damage, the spiral fits within the existing mortise at the side of the window sash where the original sash cord was located. Made of solid steel, they are designed for long-lasting wear.

This charming Set of Clarks Tip Black Cast-Iron Shutter Hinges (3 1/4-inch throw), were commonly found on Victorians and early 20th century Colonials. Intended for flush applications, they are surface mounted and lift off, making it easy to install or remove your shutters. Features a rust resistant, powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two fasteners - enough to complete one window.

These brackets made of plastic and stainless steel can be used with all of our lag mount shutter dogs. Fits up to a 3/8-inch diameter lag bolt and is easy to adjust. The brackets hold the shutter panel and dog together firmly to reduce rattling in the wind.

Our Premium Spot Number-10 Sash Cord is typically used for counterbalance systems on double-hung windows. Made of premium-quality cotton yarn, a nylon fiber core gives it added strength and durability with a coating that is chemical, weather and heat resistant. It is suited for use on new construction, or for updating a worn or damaged system.

Our heavy-duty, cast brass sash lock is a House of Antique Hardware exclusive! This distinctive design, with its tall half-cup keeper, is the type found in early 20th century schools, offices and commercial buildings, as well as fine homes. Made of durable, non-rusting cast brass, it holds your windows securely in place. It comes in our exclusive Antique by-Hand finish which ages gracefully over time into a beautiful natural patina.

Square and simple in design, this versatile transom latch goes with everything, from Victorian to Mid-Century Modern. The circa 1900 design is made of stamped and cast brass. Hand-finished with our living antique patina!

Our Victorian-style Bermuda Shutter Fasteners are typically paired with Clarks Tip or full mortise-type shutter hinges. The catch is sill mounted, while the hook mounts to the lower front of the shutter. Made of cast-iron, they feature a weather resistant, powder-coated finish.

Our Premium Spot Number-12 Sash Cord is typically used for counterbalance systems on double-hung windows. Made of premium-quality cotton yarn, a nylon fiber core gives it added strength and durability with a coating that is chemical, weather and heat resistant. It is suited for use on new construction, or for updating a worn or damaged system.

With this handy hanger, your transom hook is always where you need it. Made of durable, cast brass, it comes in our exclusive Antique-By-Hand, a living finish that ages gracefully over time into a beautiful natural patina.

Our Number-10 Cotton Sash is typically used for counterbalance systems on double-hung windows. Made of quality cotton yarn, it features a polyester fiber core, giving it added strength and durability and an interlocked polished solid braid to resist rot, mildew,and wear. It is suited for use on new construction, or for updating a worn or damaged system.

With this handy hanger, your transom hook is always where you need it. Made of durable, cast brass, the unlacquered surface naturally develops an antique patina.

This medium sized, lever handle casement latch is made of solid, non-corrosive brass. The handle and base are riveted for extra strength, making this a fine choice for large or hard to close windows. Finished with our exclusive living patina, it includes 2 strikes, one for mortise and one for rim mounting. Determined from the outside, this latch is for windows hinged on the right.

These large and finely cast scallop design shutter dogs are ideal for coastal homes. Made of heavy duty cast iron, they're finished with a rust resistant black powder coat. Easily attached to wood siding with the included mounting plate and post.

These fanciful Dolphin Shutter Dogs add a charming outlook to any home. Made of cast aluminum, they are finished with a durable black powder coat finish. Designed for masonry applications.

These Victorian shutter fasteners are typically paired with Clarks Tip or full mortise type shutter hinges. The catch is sill mounted, while the hook mounts to the lower front of the shutter. Raw cast iron, painting required.

A traditional symbol of hospitality and conviviality, the grape motif is a wonderful way to enliven your home's exterior. Made of heavy duty cast iron, these durable shutter dogs are finished with a rust resistant black powder coat. Easily mounted to masonry with the included lag bolt (anchors recommended - not included).

This narrow, replacement sash lock catch is designed for modern double hung wood windows with insulated glass. Only 7/16-inch in width, it fits on some Marvin windows (not all), and other brands with a non-beveled catch rail. Solid brass.

A traditional symbol of hospitality and conviviality, the grape motif is a fabulous way to enliven your home's exterior. Made of heavy duty cast iron, these durable shutter dogs are finished with a rust resistant black powder coat. Easily attached to wood siding with the included mounting plate and post.

This premium, solid-brass 10-inch casement stay delivers smooth function and long-lasting wear. The traditional-style, knurled knob lets you open, close, and secure your vintage, outswing casement windows with ease. It features beveled mounting plates is reversible for left or right handing, and comes hand-finished with our living antique patina.

Our Large S-Hooks are ideal for attaching weights to the sash chains on larger double-hung windows. Made of solid steel, they are designed for long-lasting wear. Used to attach chains to weights with a hole through the center running from top to bottom.

When hanging sash weights for double-hung windows, our Ferrules (1/4-Inch) are used to secure a loop at the end of the sash cord. Ideal for cable-core cords, these sturdy fasteners enable the weights to stay in place. Made of solid aluminum, this version is designed for #8 cord.

Premium quality reproduction of Acro numbering tacks 26-50 made of the original white brass alloy. Large, easy to read 1/2-inch diameter head with 5/16-inch long barbed pyramid nail.

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (5 1/2-Inch x 3 1/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.