Our 7/8-Inch Chain Spirals are ideal for attaching sash chains to your double-hung sash windows. Without using screws, which could cause damage, the spiral fits within the existing mortise at the side of the window sash where the original sash cord was located. Made of solid steel, they are designed for long-lasting wear.

These brackets made of plastic and stainless steel can be used with all of our lag mount shutter dogs. Fits up to a 3/8-inch diameter lag bolt and is easy to adjust. The brackets hold the shutter panel and dog together firmly to reduce rattling in the wind.

A single small flower and a banded border give this iron sash lock a decorative touch. Pair it with fancy iron sash lifts for a complete Victorian look. Cast from heavy duty iron with a lacquered antique finish.

Cast from heavy-duty, solid brass, this sturdy Transom Window Latch Hook In Antique-By-Hand will open and close your window with ease. The 1/2 inch diameter button fits into the loop on the transom catch, allowing you to push or pull the loop as needed to disengage the catch. Fits a 7/8-inch diameter pole. The hook is hand-finished with our exclusive antique patina.

Pair of stainless steel L Type Bahama shutter hinges. These Bahama or Bermuda shutter hinges are powder coated black and are offset mounted. Includes stainless steel screws which are black zinc plated to match hardware.

Our Premium Spot Number-10 Sash Cord is typically used for counterbalance systems on double-hung windows. Made of premium-quality cotton yarn, a nylon fiber core gives it added strength and durability with a coating that is chemical, weather and heat resistant. It is suited for use on new construction, or for updating a worn or damaged system.

This set of Acme Cast-Iron Mortise Shutter Hinges (9-Inch x 3 15/16-Inch) contains everything you need to hang one pair of shutters. The mid-Victorian design features a unique, patented pintle that keeps shutters securely in place. Heavy-duty and authentic.

This narrow, replacement sash lock catch is designed for modern double hung wood windows with insulated glass. Only 7/16-inch in width, it fits on some Marvin windows (not all), and other brands with a non-beveled catch rail. Solid brass.

The design for this distinctive hook-style sash lock dates to the 1870s. The crisp Eastlake pattern is just as fresh and appealing today. Reproduced in solid, cast iron with a black powder coated finish.

This charming Eastlake style sash lift is reproduced from an 1880s original. Made of cast iron, the pattern is crisp and geometric, with a single iris flower at center. Large and durable, it's a good choice for tall or broad sash windows. Offered with a matte black powdercoat or a lacquered antique finish.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (3 3/4-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

Style meets utility with this unique, late 19th-century combination sash lock and lift. The spring loaded function makes it easy to unlock, lift, lower, and lock any window sash. Made of forged bronze, it comes in our exclusive Antique-By-Hand, a living finish that ages gracefully over time into a beautiful natural patina.

Our heavy-duty, cast brass sash lock is a House of Antique Hardware exclusive! This distinctive design, with its tall half-cup keeper, is the type found in early 20th century schools, offices and commercial buildings, as well as fine homes. Made of durable, non-rusting cast brass, it holds your windows securely in place. It comes in our exclusive Antique by-Hand finish which ages gracefully over time into a beautiful natural patina.

Premium quality reproduction of Acro numbering tacks 26-50 made of the original white brass alloy. Large, easy to read 1/2-inch diameter head with 5/16-inch long barbed pyramid nail.

Cast from heavy-duty, solid brass, this sturdy Transom Window Latch Hook in Lacquered Brass will open and close your window with ease. The 1/2 inch diameter button fits into the loop on the transom catch, allowing you to push or pull the loop as needed to disengage the catch. Fits a 7/8-inch diameter pole.

This sturdy, barrel style transom latch is made of heavy-duty cast brass. The shaft is spring-loaded for vertical installation and keeps the window tightly fastened.
This latch is typically installed at the top of the window sash and operated with a pull chain or pole-mounted transom hook (use transom chains to keep the sash from falling open). Hand-finished with our living antique patina!

This medium sized, lever handle casement latch is made of solid, non-corrosive brass. The handle and base are riveted for extra strength, making this a fine choice for large or hard to close windows. Finished with our exclusive living patina, it includes 2 strikes, one for mortise and one for rim mounting. Determined from the outside, this latch is for windows hinged on the right.

With this handy hanger, your transom hook is always where you need it. Made of durable, cast brass, it comes in our exclusive Antique-By-Hand, a living finish that ages gracefully over time into a beautiful natural patina.

Bring Victorian style to your decor with our authentic reproduction shutter bar. Crafted from solid brass, it's available in your choice of four classic finishes. As versatile as it is functional, this ornate latch is ideal for securing a variety of interior window shutter types, as well as cabinet, bi-fold, and other lightweight doors. Reversible for both left and right hands.

These Small Brass and Copper Shutter Bullet Catches are an alternative to traditional shutter hold backs. Mounted to the wall and to the back of the shutter, they leave the front completely free of hardware. Use one for each shutter.

This medium sized, lever handle casement latch is made of solid, non-corrosive brass. The handle and base are riveted for extra strength, making this a fine choice for large or hard to close windows. Finished with our exclusive living patina, it includes 2 strikes, one for mortise and one for rim mounting. Determined from the outside, this latch is for windows hinged on the left.

Parliament-style 2 1/2 x 3 1/2-inch hinges have been a favorite since the late 19th century. Our authentic reproduction is made of sturdy, solid brass, and features classic ball finials and a removeable stainless-steel pin that repels rust. Ideal for deep set casement windows, it comes in our exclusive Antique by-Hand - a finish that ages gracefully over time into a beautiful natural patina.

With this handy hanger, your transom hook is always where you need it. Made of durable, cast brass, the unlacquered surface naturally develops an antique patina.

These Bahama or Bermuda shutter hinges are powder coated black and are offset mounted. The pintles have a 1 inch offset and the hinges are offset by 1/2 inch.