This charming Set of Clarks Tip Black Cast-Iron Shutter Hinges (1 1/4-inch throw), were commonly found on Victorians and early 20th century Colonials. Intended for flush applications, they are surface mounted and lift off, making it easy to install or remove your shutters. Features a rust resistant, powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two fasteners - enough to complete one window.

Right out of the late Victorian era, this elegant sash lift showcases its iconic fleur-de-lis design. Reproduced in cast iron, it comes in your choice of two classic finishes.

Our Square Sash Weight (3 lb.) easily combines with other size weights to create the proper counterbalance for smooth operating windows. When stacked together for instance, one 3 lb. and two 1 lb. take up the same space as one 5 lb. while moving just as smoothly within the window pocket. Ideal for use on new construction or as replacements for damaged or lost items.

These bold sunflower shutter dogs will add a cheery outlook to any home. Made of heavy duty cast iron, they're finished with a rust resistant black powder coat. Easily attached to wood siding with the included mounting plate and post.

New York style strap hinges are one of the most stylish and practical ways of hanging your shutters. This set of four hinges has a 2 1/4-inch offset (4 1/2-inch throw), which is ideal for most brick houses. Hand forged from heavy duty steel, they're galvanized and powder coated to resist rust.

The design for this distinctive hook-style sash lock dates to the 1870s. The crisp Eastlake pattern is just as fresh and appealing today. Reproduced in solid, cast iron with a lacquered finish.

Despite their name, these rat tail tie backs are an elegant addition to any home. An authentic colonial design, they're made of heavy duty cast iron, then galvanized and finished with a rust-resistant black powder coat. Easily mounted to wood siding.

This beautifully detailed sash lock is the crowning touch to your window restoration. Reproduced from an 1880s original, it features a lovely flower & scroll design, set off by a crisp, banded border. Finely crafted from strong and attractive cast iron, with your choice of a lacquered antique finish or a matte black powdercoat. Over time humidity and use may cause the lacquer to wear, allowing natural and desirable aging to occur.

With a 1 3/4-inch offset, these traditional arch-top pintles work well with brick veneered homes. Use them to replace worn or damaged pintles or to build your own custom sized shutter hinges (straps sold separately). Made of heavy duty stainless steel which is powder coated black.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (6 1/2-Inch x 3 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

Sturdy and versatile, our 6-Inch Lag Bolts are designed for masonry or wood applications. They feature a variable offset and a 1/2-inch diameter, which fits some of our L straps (sold separately). Made of galvanized steel with black powder coating. Length from end of lag to center of pintle rod is 6 1/4-inch. The lag bolt is 3/8-inch in diameter.

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (3 3/4-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

This heavy-duty casement adjuster is constructed from solid, cast iron. The handle is approximately 3/16-inch thick - well suited to large or heavy windows. It includes two sill mounted keepers and holes for three opening positions. Offered in durable matte black and lacquered antique iron finishes, it's a great choice for colonial, Tudor, Spanish or rustic country houses!

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (4 1/2-Inch x 2 7/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

The stainless steel Plate Mount Ring Pull makes it easy to close your shutters from inside your home while adding a perfect finishing touch. Functional as well as aesthetic, this piece of hardware provides a subtle Old World period feel. Suited to Colonials, Tudors or any Romantic style of home.

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (3 1/8-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

Our 6-Inch Window Utility Pull is inspired by a classic bar handle - giving your windows and cabinets an old-fashioned charm. Crafted from solid brass, it features two screw holes on each side to provide extra strength for frequent use or heavier furniture. Wherever you use it, this durable pull withstands the test of time.

These full-mortise 6 x 3-inch shutter hinges have a unique curved offset that allows you to throw the shutter clear of the window. Made of heavy-duty forged iron with a rough textured surface, they are a great choice for Colonial or Romantic style homes. The surface is phosphate treated then lacquered, for rust-resistant, long-lasting wear.

The bold and graphic motif on our Oriental-Pattern Sash Lift is one of our favorites. Designed by Branford Lock Works, circa 1885, this striking sash lift displays an open fan and bamboo leaves. Recreated in durable cast-iron, it is available in antique-iron or a matte-black finish.

Secure your shutters against coming storms with this sturdy hurricane slide bolt. With a long catch plate and a 3 1/8-inch throw, it balances the fastening force across both shutters. Made of solid cast iron with a black primer coat.

With a 3 1/4-inch offset, these traditional arch-top pintles are suited for brick or stone houses. Use them to replace worn or damaged pintles, or to build your own custom sized shutter hinges (straps sold separately). Made of heavy-duty galvanized cast iron with a rust-resistant powder-coated finish.

Rugged meets refined in our 6-Inch Classic Hammered-Surface Shutter Dogs. With their elegant profile and hammered texture, they beautifully compliment any style of home. Made of heavy, cast iron, they feature a weather resistant, powder-coated finish. Designed for masonry applications (anchors recommended - not included). Comes complete with lag screws, magnetic holders, and masonry anchors.

These full-mortise 5 x 3-inch shutter hinges have a unique curved offset that allows you to throw the shutter clear of the window. Made of heavy-duty forged iron with a rough textured surface, they are a great choice for Colonial or Romantic style homes. The surface is phosphate treated then lacquered, for rust-resistant, long-lasting wear.

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (4 1/2-Inch x 2 7/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.