Authentic colonial style and a rough black finish make these classic New York strap hinges a great choice for period restorations. These very sturdy hinges lift off for easy maintenance and have a 2 1/4-inch offset (4 1/2-inch throw). Made from 1/4-inch thick cast iron, they are powder coated to resist rust.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (5-Inch x 3-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

Hammered edges, a rough texture, and an artfully curled tail give these sturdy shutter dogs an authentic colonial flavor. Made of heavy duty cast iron, they're finished with a rust resistant black powder coat. Easily mounted to masonry with the included lag bolt.

This stately Regency-style 4-foot cremone bolt has a timeless quality - the design's classic arches and curves convey a dignified feel. Crafted from cast iron, it's a lovely way to upgrade smaller casement windows, cabinets, and furniture.

These charming, acorn tip hinges were commonly found on Victorians and early 20th century colonials. The hinges are surface mounted and lift off, making it easy to install or remove your shutters. The 3 1/4-inch throw is optimal for brick veneered homes.

Ornamental as well as practical, this floral ring pull gives your shutters an Old World flavor. The artful back plate and twisted ring make it the pull of choice for Spanish, Tudor or Mediterranean homes. Made of rust-proof cast aluminum with a satiny black powder coat.

Use these traditional tapered shutter straps to replace worn or missing parts, or to build shutter hinges for your specific needs (mounting pintles sold separately). They are designed to work with 7/16-inch diameter pintles and have a 3/4-inch offset. Made of heavy-duty galvanized steel with rust-resistant and powder-coated finish.

With a 3/4 inch offset, these simple square pintles work well with wood or stucco homes with flat window trim. Use them to replace worn or damaged pintles or to build your own custom sized shutter hinges (straps sold separately). Made of heavy duty forged steel which is powder coated black.

Cast iron swirled tail casement window latch. This latch is available in matte black or a rust patina.

Our Pair of 1 3/4-inch Offset Suffolk-Style L Hinges with Plate Pintles offer traditional Colonial style. Constructed from galvanized steel, they feature a rust-resistant and durable black powder-coated finish. They can be mounted to show either when the shutters are open or closed.

When security is a priority, this heavy duty shutter bolt does the job. Forged from 3/16-inch thick 304 stainless steel, it's as strong as they come. Finished with a black powder coat.

This heavy-duty casement adjuster is constructed from solid, cast iron. The handle is approximately 3/16-inch thick - well suited to large or heavy windows. It includes two sill mounted keepers and holes for four opening positions. Offered in durable matte black, lacquered antique iron or rusted iron finishes, it's a great choice for colonial, Tudor, Spanish or rustic country houses!

These brackets made of plastic and stainless steel can be used with all of our lag mount shutter dogs. Fits up to a 3/8-inch diameter lag bolt and is easy to adjust. The brackets hold the shutter panel and dog together firmly to reduce rattling in the wind.

A single small flower and a banded border give this iron sash lock a decorative touch. Pair it with fancy iron sash lifts for a complete Victorian look. Cast from heavy duty iron with a lacquered antique finish.

Pair of stainless steel L Type Bahama shutter hinges. These Bahama or Bermuda shutter hinges are powder coated black and are offset mounted. Includes stainless steel screws which are black zinc plated to match hardware.

This set of Acme Cast-Iron Mortise Shutter Hinges (9-Inch x 3 15/16-Inch) contains everything you need to hang one pair of shutters. The mid-Victorian design features a unique, patented pintle that keeps shutters securely in place. Heavy-duty and authentic.

Use these traditional style shutter straps to replace worn or missing parts, or to build shutter hinges for your specific needs (mounting pintles sold separately). Ideal for use with New York or L style shutter hinges as a middle support. Designed to work with 3/8-inch diameter pintles, they have a 1 1/4-inch offset. Made from 1/8-inch thick forged stainless steel, they feature a durable black powder coated finish.

The design for this distinctive hook-style sash lock dates to the 1870s. The crisp Eastlake pattern is just as fresh and appealing today. Reproduced in solid, cast iron with a black powder coated finish.

Use these traditional style shutter straps to replace worn or missing parts, or to build shutter hinges for your specific needs (mounting pintles sold separately). Designed to work with 1/2-inch diameter pintles, they have zero offset. Made of powder coated stainless steel.

Use these rustic New York style shutter straps to replace worn or missing parts, or to build shutter hinges for your specific needs (mounting pintles sold separately). Designed to work with 3/8-inch diameter pintles, they have no offset. Made of galvanized steel.

With a 1 1/2-inch offset, these traditional arch-top pintles are suited for brick veneered homes. Use them to replace worn or damaged pintles, or to build your own custom sized shutter hinges (straps sold separately). Made of heavy-duty galvanized cast iron with a rust-resistant powder-coated finish.

This charming Eastlake style sash lift is reproduced from an 1880s original. Made of cast iron, the pattern is crisp and geometric, with a single iris flower at center. Large and durable, it's a good choice for tall or broad sash windows. Offered with a matte black powdercoat or a lacquered antique finish.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (3 3/4-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

These large and finely cast scallop design shutter dogs are ideal for coastal homes. Made of heavy duty cast iron, they're finished with a rust resistant black powder coat. Easily mounted to wood or masonry with the included lag bolt.