Premium quality reproduction of Acro numbering tacks 1-25 made of the original white brass alloy. Large, easy to read 1/2-inch diameter head with 5/16-inch long barbed pyramid nail.

Rugged meets refined in these classic scroll design shutter dogs. With their elegant profile and hammered texture they beautifully compliment any style of home. Made of heavy duty cast iron, galvanized and finished with a rust resistant black powder coat. Designed for wood siding.

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (3 3/4-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

These bold sunflower shutter dogs will add a cheery outlook to any home. Made of heavy duty cast iron, they're finished with a rust resistant black powder coat. Easily mounted to wood (with blocking) or masonry with the included lag bolt.

The design for this distinctive hook-style sash lock dates to the 1870s. The crisp Eastlake pattern is just as fresh and appealing today. Reproduced in solid, cast iron with a lacquered finish.

The Colonial look of our 9 1/4-Inch Heart-Tip Shutter Strap Hinges (1-inch offset) is still popular today! The straps are forged out of steel and the pintles are made of solid, cast iron. They feature a textured surface and rust-resistant, powder-coated finish.

Despite their name, these rat tail tie backs are an elegant addition to any home. An authentic colonial design, they're made of heavy duty cast iron, then galvanized and finished with a rust-resistant black powder coat. Easily mounted to wood siding.

This charming Eastlake style sash lift is reproduced from an 1880s original. Made of cast iron, the pattern is crisp and geometric, with a single iris flower at center. Large and durable, it's a good choice for tall or broad sash windows. Offered with a matte black powdercoat or a lacquered antique finish.

This simple Victorian sash window stay is solid cast iron and measures 2 1/2-inch by 2-inch

When security is a priority, this heavy duty shutter bolt does the job. Crafted from 1/4-inch thick cast iron, it's as strong as they come. Finished with a black powder coat.

With a 1 7/8-Inch offset, our Traditional Plate Arch-Top Pintles are suited for wood or stucco homes, with flat window trim. Use them to replace worn or damaged pintles, or to build your own custom sized shutter hinges (straps sold separately). Made of heavy-duty cast iron with a rust-resistant powder-coated finish.

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (6 1/2-Inch x 3 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

Right out of the late Victorian era, this elegant sash lift showcases its iconic fleur-de-lis design. Reproduced in cast iron, it comes in your choice of two classic finishes.

These charming, acorn tip hinges were commonly found on Victorians and early 20th century colonials. The hinges are surface mounted and lift off, making it easy to install or remove your shutters. The 1 1/4-inch throw is intended for flush applications.

The design for this distinctive hook-style sash lock dates to the 1870s. The crisp Eastlake pattern is just as fresh and appealing today. Reproduced in solid, cast iron with a black powder coated finish.

A rough textured surface gives this shutter ring pull an old-world feel. Use it on Colonials, Tudors or any Romantic style of home. Cast from solid iron, nearly 1/4-inch thick! Powder coated.

Rugged meets refined in these large size classic scroll design shutter dogs. With their elegant profile and hammered texture they beautifully compliment any style of home. Made of heavy duty cast iron, finished with a rust resistant black powder coat. Designed for masonry applications.

These large and finely cast scallop design shutter dogs are ideal for coastal homes. Made of heavy duty cast iron, they're finished with a rust resistant black powder coat. Easily mounted to wood or masonry with the included lag bolt.

The Colonial look of our 9 1/4-Inch Heart-Tip Shutter Strap Hinges (no offset) is still popular today! The straps are forged out of steel and the pintles are made of solid, cast iron, both galvanized. They feature a textured surface and rust-resistant, powder-coated finish.

Popular throughout the Mid-Atlantic, these Small Georgetown Style Shutter Dogs are distinguished by their artful curl. Hand-forged from heavy duty iron, they are powder coated to resist rust. Easily mounted to masonry with the included lag bolt.

This set of Acme Cast-Iron Mortise Shutter Hinges (9-Inch x 3 15/16-Inch) contains everything you need to hang one pair of shutters. The mid-Victorian design features a unique, patented pintle that keeps shutters securely in place. Heavy-duty and authentic.

This extra long hook & eye also works great as a Bahama shutter stay. Use it to hold them open or securely closed. A satin black powder coat helps prevent rust and coordinates with most exterior hardware.

These full-mortise 4 x 3-inch shutter hinges have a unique curved offset that allows you to throw the shutter clear of the window. Made of heavy-duty forged iron with a rough textured surface, they are a great choice for Colonial or Romantic style homes. The surface is phosphate treated then lacquered, for rust-resistant, long-lasting wear.

The Colonial look of our 9 1/4-Inch Suffolk-Style Shutter Strap Hinges (1-inch offset) is still popular today! The straps are forged out of steel and the pintles are made of solid, cast iron, both galvanized. They feature a textured surface and rust-resistant, powder-coated finish.