Our Set of 3/4-inch Offset Suffolk-Style L Hinges with Narrow Plate Pintles offer traditional Colonial style. Constructed from stainless steel, they feature a rust-resistant and durable black powder-coated finish. They can be mounted to show either when the shutters are open or closed.

Popular throughout the Mid-Atlantic, these Small Georgetown Style Shutter Dogs are distinguished by their artful curl. Hand-forged from heavy duty iron, they are powder coated to resist rust. Easily mounted to masonry with the included lag bolt.

Rugged meets refined in these classic scroll design shutter dogs. With their elegant profile and hammered texture they beautifully compliment any style of home. Made of heavy duty cast iron, galvanized and finished with a rust resistant black powder coat. Designed for masonry applications.

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (6 1/2-Inch x 3 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

Our Suffolk-Style No Offset Middle Hinges offer traditional Colonial style. Constructed from stainless steel, they feature a rust-resistant and durable black powder-coated finish. They can be mounted to show either when the shutters are open or closed. Length from end of lag to center of pintle rod is 4 3/4-inch. The lag bolt is 3/8-inch diameter.

True classics, these 6-inch scroll design shutter dogs are an elegant choice for any style of home. Made of weather-resistant cast aluminum, they feature a durable black powder coated finish.

Still popular today, these traditional Colonial-style Shutter Strap Hinges with Plate Pintles (3 1/4-Inch Offset) can be mounted to be visible whether your shutters are open or closed. Forged from galvanized steel with cast iron pintles, they feature a rough textured, black-powder coating for a perfect period look that helps to reduce rust. Made to last a lifetime, the reversible, lift-off design makes for easy installation and maintenance.

These traditional Colonial style 3/4-inch offset hinges with lag pintles are still popular today! The straps are forged out of steel and the pintles are made of solid cast iron, both galvanized. These versatile hinges can be mounted to show either when the shutters are open or closed. The rough textured black powder coating provides a great period look and helps reduce rust.

True classics, these 7-inch scroll design shutter dogs are an elegant choice for any style of home. Made of weather-resistant cast aluminum, they feature a durable black powder coated finish.

This pair of lightweight and sturdy stays is adjustable from 22-inch to 34-inch length. This set can be used for small to large Bahama or Bermuda shutters and is made out of aluminum to avoid rust. This set comes with brass pins for attaching the rod to the brackets when the shutter is held open. When the shutter is to be closed during a storm the rods can be removed and the brackets locked together to keep the shutter fastened. The bars can also be cut to smaller lengths if desired. Optional sill mount brackets are included with this set.

This pair of lightweight and sturdy 14 inch stays is designed for small Bahama or Bermuda shutters and made out of aluminum to avoid rust. This set comes with brass pins for attaching the rod to the brackets when the shutter is held open. When the shutter is to be closed during a storm the rods can be removed and the brackets locked together to keep the shutter fastened. The bars can also be cut to smaller lengths if desired. Optional sill mount brackets are included with this set.

These cast iron 8 1/2-inch scroll shutter dogs are a simple and elegant way to keep shutters open while adding a lovely period detail to your home’s exterior. Ours are uniquely smooth which allows them to blend with various house styles. Can be mounted on wood or masonry with the included lag bolt. (masonry lag shield anchors not included).

This charming Set of Clarks Tip Black Cast-Iron Shutter Hinges (1 1/4-inch throw), were commonly found on Victorians and early 20th century Colonials. Intended for flush applications, they are surface mounted and lift off, making it easy to install or remove your shutters. Features a rust resistant, powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two fasteners - enough to complete one window.

These bold sunflower shutter dogs will add a cheery outlook to any home. Made of heavy duty cast iron, they're finished with a rust resistant black powder coat. Easily attached to wood siding with the included mounting plate and post.

New York style strap hinges are one of the most stylish and practical ways of hanging your shutters. This set of four hinges has a 2 1/4-inch offset (4 1/2-inch throw), which is ideal for most brick houses. Hand forged from heavy duty steel, they're galvanized and powder coated to resist rust.

This continuous hinge for Bahama or Bermuda shutters is made of two parts which slide together for easy installation and removal

Despite their name, these rat tail tie backs are an elegant addition to any home. An authentic colonial design, they're made of heavy duty cast iron, then galvanized and finished with a rust-resistant black powder coat. Easily mounted to wood siding.

With a 1 3/4-inch offset, these traditional arch-top pintles work well with brick veneered homes. Use them to replace worn or damaged pintles or to build your own custom sized shutter hinges (straps sold separately). Made of heavy duty stainless steel which is powder coated black.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (6 1/2-Inch x 3 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

Sturdy and versatile, our 6-Inch Lag Bolts are designed for masonry or wood applications. They feature a variable offset and a 1/2-inch diameter, which fits some of our L straps (sold separately). Made of galvanized steel with black powder coating. Length from end of lag to center of pintle rod is 6 1/4-inch. The lag bolt is 3/8-inch in diameter.

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (3 3/4-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (4 1/2-Inch x 2 7/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

The stainless steel Plate Mount Ring Pull makes it easy to close your shutters from inside your home while adding a perfect finishing touch. Functional as well as aesthetic, this piece of hardware provides a subtle Old World period feel. Suited to Colonials, Tudors or any Romantic style of home.

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (3 1/8-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.