Menu

Contact
x

Free Shipping At House of Antique Hardware
You Save on Shipping With Every Order

FREE Ground Shipping
On orders over $100
$6.99 Flat Rate Ground shipping
On orders under $100
2nd Day Air Shipping Starting at $13.99
How do I get Free Ground Shipping?
You get free shipping anywhere in the contiguous 48 states on all orders of $100 or more. There are no added processing or handling fees!
What is flat rate shipping?
Pay only $6.99 to ship any order under $100 - no added processing or handling fees! Applies to ground service anywhere in the contiguous US.
What about shipments to Alaska and Hawaii?
Rates begin at $6.99 and will not exceed $19.99, regardless of order size. Expedited shipping options are available for an additional charge.
What if I need my order fast?
Choose UPS 2nd Day Air with rates starting at $13.99. You'll find even faster shipping options and estimated shipping fees displayed in the shopping cart.
Do you ship internationally?
We do. Our Shipping Policy gives details on shipments to international destinations. Free Shipping and Flat Rate Shipping only apply to destinations within the United States.
Questions?
For more information about our Save on Shipping program, check our complete Shipping Policy or call Customer Service at (888) 223-2545.
X
Call Now

Toll Free: (888) 223-2545

Customer Service
Press 3

Hardware Specialist
Press 2

Hours:
9:00 am - 8:30 pm
M-F Eastern Time

Results 31-46 of 4612
Sort by NameSort by Price

Classical Shutter Hardware

Pair of Dolphin Shutter Dogs - Lag Mounted (item #RS-09EH-SD5)

Pair of Dolphin Shutter Dogs - Lag Mounted

These fanciful Dolphin Shutter Dogs add a charming outlook to any home. Made of cast aluminum, they are finished with a durable black powder coat finish. Designed for masonry applications.
[more...]

Pair of Cast-Iron Sill Bermuda Shutter Fasteners (item #R-09JW-088303B)

Pair of Cast-Iron Sill Bermuda Shutter Fasteners

Our Victorian-style Bermuda Shutter Fasteners are typically paired with Clarks Tip or full mortise-type shutter hinges. The catch is sill mounted, while the hook mounts to the lower front of the shutter. Made of cast-iron, they feature a weather resistant, powder-coated finish.
[more...]

Set of

Set of "Clarks Tip" Black Cast-Iron Shutter Hinges with 1 1/4" Throw

This charming Set of Clarks Tip Black Cast-Iron Shutter Hinges (1 1/4-inch throw), were commonly found on Victorians and early 20th century Colonials. Intended for flush applications, they are surface mounted and lift off, making it easy to install or remove your shutters. Features a rust resistant, powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two fasteners - enough to complete one window.
[more...]

Set of

Set of "Clarks Tip" Black Cast-Iron Shutter Hinges with 3 1/4" Throw

This charming Set of Clarks Tip Black Cast-Iron Shutter Hinges (3 1/4-inch throw), were commonly found on Victorians and early 20th century Colonials. Intended for flush applications, they are surface mounted and lift off, making it easy to install or remove your shutters. Features a rust resistant, powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two fasteners - enough to complete one window.
[more...]

"Acme" Black Cast-Iron Mortise Shutter Hinges - 3 1/8" x 2 1/2"

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (3 1/8-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.
[more...]

"Acme" Black Cast-Iron Mortise Shutter Hinges - 3 3/4" x 2 1/2"

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (3 3/4-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.
[more...]

"Acme" Black Cast-Iron Mortise Shutter Hinges - 4 1/2" x 2 7/8"

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (4 1/2-Inch x 2 7/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.
[more...]

"Acme" Black Cast-Iron Mortise Shutter Hinges - 5" x 3"

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (5-Inch x 3-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.
[more...]

"Acme" Black Cast-Iron Mortise Shutter Hinges - 5 1/2" x 3 1/8"

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (5 1/2-Inch x 3 1/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.
[more...]

"Acme" Black Cast-Iron Mortise Shutter Hinges - 6 1/2" x 3 1/2"

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (6 1/2-Inch x 3 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.
[more...]

Pair of Magnetic Shutter-Dog Holders (item #R-09JW-088439)

Pair of Magnetic Shutter-Dog Holders

Our Magnetic Shutter-Dog Holders prevent the shutter dog from over rotating, while the magnet holds the dog against the shutter to greatly reduce wind rattling. To preserve the classic look, these holders are virtually invisible. Made of stainless-steel with a nickel-plated magnet, they feature a weather-resistant, powder-coated finish.
[more...]

Pair of Alligator Shutter Dogs - Lag Mounted (item #R-09JW-088262)

Pair of Alligator Shutter Dogs - Lag Mounted

Our fanciful Alligator Shutter Dogs add a charming outlook to any home. Made of cast iron, they feature a textured surface and weather-resistant coating.
[more...]

Pair of 6

Pair of 6" Cast-Aluminum Hammered Surface Shutter Dogs - Lag Mounted

Rugged meets refined in our 6-Inch Classic Hammered-Surface Shutter Dogs. With their elegant profile and hammered texture, they beautifully compliment any style of home. Made of cast aluminum, they feature a durable, urethane matte-black paint. Reversible and designed for masonry applications (anchors recommended - not included). Made in the USA.
[more...]

Pair of 6

Pair of 6" Cast-Iron Shutter Dogs with Mounting Hardware

Rugged meets refined in our 6-Inch Classic Hammered-Surface Shutter Dogs. With their elegant profile and hammered texture, they beautifully compliment any style of home. Made of heavy, cast iron, they feature a weather resistant, powder-coated finish. Designed for masonry applications (anchors recommended - not included). Comes complete with lag screws, magnetic holders, and masonry anchors.
[more...]

Pair of Cast Iron 6-Inch Scroll Shutter Dogs - Lag Mounted (item #R-09BM-8801-BK)

Pair of Cast Iron 6-Inch Scroll Shutter Dogs - Lag Mounted

These cast iron 6-inch scroll shutter dogs are a simple and elegant way to keep shutters open while adding a lovely period detail to your home’s exterior. Ours are uniquely smooth which allows them to blend with various house styles. Can be mounted on wood or masonry with the included lag bolt. (masonry lag shield anchors not included).
[more...]

Pair of Cast Iron 8-Inch Scroll Shutter Dogs - Lag Mounted (item #R-09BM-8802-BK)

Pair of Cast Iron 8-Inch Scroll Shutter Dogs - Lag Mounted

These cast iron 8 1/2-inch scroll shutter dogs are a simple and elegant way to keep shutters open while adding a lovely period detail to your home’s exterior. Ours are uniquely smooth which allows them to blend with various house styles. Can be mounted on wood or masonry with the included lag bolt. (masonry lag shield anchors not included).
[more...]



Results 31-46 of 4612
Sort by NameSort by Price