Parliament-style 2 1/2 x 4-inch hinges have been a favorite since the late 19th century. Our authentic reproduction is made of sturdy, solid brass, and features classic ball finials and a removable stainless-steel pin that repels rust. Ideal for deep set casement windows, it comes in your choice of four popular finishes.

These cast iron 8 1/2-inch scroll shutter dogs are a simple and elegant way to keep shutters open while adding a lovely period detail to your home’s exterior. Ours are uniquely smooth which allows them to blend with various house styles. Can be mounted on wood or masonry with the included lag bolt. (masonry lag shield anchors not included).

This pair of lightweight and sturdy 14 inch stays is designed for small Bahama or Bermuda shutters and made out of aluminum to avoid rust. This set comes with brass pins for attaching the rod to the brackets when the shutter is held open. When the shutter is to be closed during a storm the rods can be removed and the brackets locked together to keep the shutter fastened. The bars can also be cut to smaller lengths if desired. Optional sill mount brackets are included with this set.

This stately, 6-foot Regency-style cremone bolt lends a dignified air to casement windows, cabinets, and armoires. Classic arches and curves adorn its understated design, making it a fine choice for a variety of interiors. Cast in iron with two rustic finish options.

This small sized, ring handle casement latch is made of solid, non-corrosive brass. The handle and base are riveted for extra strength, making this a fine choice for large or hard to close windows. Finished with our exclusive living patina.

Adorned with intricate patterns, this 9-foot French-style cremone bolt is as lovely as it is functional. Cast in solid brass, a charming flower graces the knob, while the case and guides feature classic acanthus leaf motifs. This version comes in our own Antique-By-Hand - a living finish that ages gracefully over time. Ideal for French doors, tall casement windows, cabinets, and armoires.

Decorative functionality defines this Filigree 9-foot cremone bolt. The intricate patterns reflect both Classical and Victorian elements. Made from solid brass, it is well suited to French doors, tall casement windows, cabinets, and armoires. Available in our Antique-By-Hand finish which ages over time.

Our number 45 Sash Chain is typically used for counterbalance systems on double-hung windows. Made of plated steel, it is a decorative and more sturdy alternative to standard cord options. Ideal for new construction, or for replacing a worn or damaged system.

Our Square Sash Weight (3 lb.) easily combines with other size weights to create the proper counterbalance for smooth operating windows. When stacked together for instance, one 3 lb. and two 1 lb. take up the same space as one 5 lb. while moving just as smoothly within the window pocket. Ideal for use on new construction or as replacements for damaged or lost items.

Use these stainless steel storm window stays for old fashioned wooden screens or storm windows that need to be propped up for ventilation or access. Available in oil-rubbed bronze for a darker classic look. They are used in conjunction with top mount hanging fasteners.

These vintage-style turn buttons make it easy to install and remove your wooden screens and storm windows. Constructed of heavy-duty cast iron, they provide long-lasting quality, and feature a plated black finish with copper highlights. This set comes complete with matching flat-head slotted screws.

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (3 1/8-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (6 1/2-Inch x 3 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

Parliament-style 2 1/4 x 3-inch hinges have been a favorite since the late 19th century. Our authentic reproduction is made of sturdy, solid brass, and features classic ball finials and a removable stainless-steel pin that repels rust. Ideal for deep set casement windows, it comes in your choice of four popular finishes.

These Brass and Copper Shutter Bullet Catches are an alternative to traditional shutter hold backs. Mounted to the wall and to the back of the shutter, they leave the front completely free of hardware. Use one for each shutter.

Parliament-style 2 1/2 x 4 1/2-inch hinges have been a favorite since the late 19th century. Our authentic reproduction is made of sturdy, solid brass, and features classic ball finials and a removable stainless-steel pin that repels rust. Ideal for deep set casement windows, it comes in your choice of four popular finishes.

True classics, these 6-inch scroll design shutter dogs are an elegant choice for any style of home. Made of weather-resistant cast aluminum, they feature a durable black powder coated finish.

These premium stainless steel bullet catches are an alternative to traditional shutter hold backs. Mounted to the wall and to the back of the shutter, they leave the front completely free of hardware. Contains enough hardware for one window.

Parliament-style 2 1/2 x 3 1/2-inch hinges have been a favorite since the late 19th century. Our authentic reproduction is made of sturdy, solid brass, and features classic ball finials and a removeable stainless-steel pin that repels rust. Ideal for deep set casement windows, it comes in our exclusive Antique by-Hand - a finish that ages gracefully over time into a beautiful natural patina.

True classics, these scroll design shutter dogs are an elegant choice for any style of home. Made of heavy-duty galvanized steel, they feature a durable black powder coated finish.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (3 3/4-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

True classics, these 7-inch scroll design shutter dogs are an elegant choice for any style of home. Made of weather-resistant cast aluminum, they feature a durable black powder coated finish.

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (4 1/2-Inch x 2 7/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

Premium stainless steel retaining clip set designed for wood screens or storm sashes that need to stay shut tight for the season. Each set includes two retaining clips with mounting bolts and wing nuts - enough for one sash.