Our 9 1/2-Inch Casement Stay with Curly Handle is equally at home in Colonial, Tudor, or Spanish-style homes. The curled tail is delightfully decorative and practical as well, making it easy to grasp and lift. Extra thick and heavy-duty, it's a good choice for large windows. Forged in solid brass, it is left unlacquered, allowing it to age gracefully over time just like the antique originals.

These bold sunflower shutter dogs will add a cheery outlook to any home. Made of heavy duty cast iron, they're finished with a rust resistant black powder coat. Easily attached to wood siding with the included mounting plate and post.

New York style strap hinges are one of the most stylish and practical ways of hanging your shutters. This set of four hinges has a 2 1/4-inch offset (4 1/2-inch throw), which is ideal for most brick houses. Hand forged from heavy duty steel, they're galvanized and powder coated to resist rust.

Our Casement Latch with Curly Handle is equally at home in Colonial, Tudor, or Spanish-style homes. The curled tail is delightfully decorative and practical, making it easy to grasp and lift. Extra thick and heavy-duty, it's a good choice for large windows. Forged in solid brass, it is left unlacquered, allowing it to age gracefully over time just like the antique originals. With its unique reversible handle and two strike options (mortise and surface), it's a wonderful latch for cabinets, gates or shutters as well!

This Large Casement Latch in Antique-By-Hand is made of solid, non-corrosive brass. The handle and base are riveted for extra strength, making it a fine choice for large or hard to close windows. It comes in our exclusive Antique by-Hand - a finish that ages gracefully over time into a beautiful natural patina. Includes three strike plate options.

This continuous hinge for Bahama or Bermuda shutters is made of two parts which slide together for easy installation and removal

This small sized, ring handle casement latch is made of solid, non-corrosive brass. The handle and base are riveted for extra strength, making this a fine choice for large or hard to close windows. Finished with our exclusive living patina.

Despite their name, these rat tail tie backs are an elegant addition to any home. An authentic colonial design, they're made of heavy duty cast iron, then galvanized and finished with a rust-resistant black powder coat. Easily mounted to wood siding.

With a 1 3/4-inch offset, these traditional arch-top pintles work well with brick veneered homes. Use them to replace worn or damaged pintles or to build your own custom sized shutter hinges (straps sold separately). Made of heavy duty stainless steel which is powder coated black.

This premium, solid-brass 12-inch casement stay delivers smooth function and long-lasting wear. The traditional-style, knurled knob lets you open, close, and secure your vintage, outswing casement windows with ease. It features beveled mounting plates is reversible for left or right handing, and comes hand-finished with our living antique patina.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (6 1/2-Inch x 3 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

Sturdy and versatile, our 6-Inch Lag Bolts are designed for masonry or wood applications. They feature a variable offset and a 1/2-inch diameter, which fits some of our L straps (sold separately). Made of galvanized steel with black powder coating. Length from end of lag to center of pintle rod is 6 1/4-inch. The lag bolt is 3/8-inch in diameter.

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (3 3/4-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

This heavy-duty casement adjuster is constructed from solid, cast iron. The handle is approximately 3/16-inch thick - well suited to large or heavy windows. It includes two sill mounted keepers and holes for three opening positions. Offered in durable matte black and lacquered antique iron finishes, it's a great choice for colonial, Tudor, Spanish or rustic country houses!

Our Number-8 Cotton Sash cord with Galvanized Cable is typically used for counterbalance systems on double-hung windows. Made of premium-quality cotton yarn, its wire core adds strength and durability. It is suited for use on new construction, or for a worn or damaged system. Sold by the foot.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (4 1/2-Inch x 2 7/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

The stainless steel Plate Mount Ring Pull makes it easy to close your shutters from inside your home while adding a perfect finishing touch. Functional as well as aesthetic, this piece of hardware provides a subtle Old World period feel. Suited to Colonials, Tudors or any Romantic style of home.

Parliament-style 2 1/2 x 4 1/2-inch hinges have been a favorite since the late 19th century. Our authentic reproduction is made of sturdy, solid brass, and features classic ball finials and a removable stainless-steel pin that repels rust. Ideal for deep set casement windows, it comes in your choice of four popular finishes.

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (3 1/8-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

This medium sized, lever handle casement latch is made of solid, non-corrosive brass. The handle and base are riveted for extra strength, making this a fine choice for large or hard to close windows. Includes 2 strikes, one for mortise and one for rim mounting, and comes in a variety of classic finishes. Determined from the outside, this latch is for windows hinged on the left.

These full-mortise 6 x 3-inch shutter hinges have a unique curved offset that allows you to throw the shutter clear of the window. Made of heavy-duty forged iron with a rough textured surface, they are a great choice for Colonial or Romantic style homes. The surface is phosphate treated then lacquered, for rust-resistant, long-lasting wear.

Bring old-fashioned style to your decor with our authentic reproduction shutter bar. Crafted from solid brass, it's available in your choice of four classic finishes. As versatile as it is functional, this smooth operator is ideal for securing a variety of interior window shutter types, as well as cabinet, bi-fold, and other lightweight doors. Reversible for both left and right hands.

traditionally styled, our crescent sash Lock goes with homes of every era. Made from solid brass, and hand-finished with our living antique patina! Ideal for sash or hung windows.

Secure your shutters against coming storms with this sturdy hurricane slide bolt. With a long catch plate and a 3 1/8-inch throw, it balances the fastening force across both shutters. Made of solid cast iron with a black primer coat.