New York style strap hinges are one of the most stylish and practical ways of hanging your shutters. This set of four hinges has a 2 1/4-inch offset (4 1/2-inch throw), which is ideal for most brick houses. Hand forged from heavy duty steel, they're galvanized and powder coated to resist rust.

Despite their name, these rat tail tie backs are an elegant addition to any home. An authentic colonial design, they're made of heavy duty cast iron, then galvanized and finished with a rust-resistant black powder coat. Easily mounted to wood siding.

This beautifully detailed sash lock is the crowning touch to your window restoration. Reproduced from an 1880s original, it features a lovely flower & scroll design, set off by a crisp, banded border. Finely crafted from strong and attractive cast iron, with your choice of a lacquered antique finish or a matte black powdercoat. Over time humidity and use may cause the lacquer to wear, allowing natural and desirable aging to occur.

With a 1 3/4-inch offset, these traditional arch-top pintles work well with brick veneered homes. Use them to replace worn or damaged pintles or to build your own custom sized shutter hinges (straps sold separately). Made of heavy duty stainless steel which is powder coated black.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (6 1/2-Inch x 3 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

Sturdy and versatile, our 6-Inch Lag Bolts are designed for masonry or wood applications. They feature a variable offset and a 1/2-inch diameter, which fits some of our L straps (sold separately). Made of galvanized steel with black powder coating. Length from end of lag to center of pintle rod is 6 1/4-inch. The lag bolt is 3/8-inch in diameter.

This heavy-duty casement adjuster is constructed from solid, cast iron. The handle is approximately 3/16-inch thick - well suited to large or heavy windows. It includes two sill mounted keepers and holes for three opening positions. Offered in durable matte black and lacquered antique iron finishes, it's a great choice for colonial, Tudor, Spanish or rustic country houses!

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (4 1/2-Inch x 2 7/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

The stainless steel Plate Mount Ring Pull makes it easy to close your shutters from inside your home while adding a perfect finishing touch. Functional as well as aesthetic, this piece of hardware provides a subtle Old World period feel. Suited to Colonials, Tudors or any Romantic style of home.

Our 6-Inch Window Utility Pull is inspired by a classic bar handle - giving your windows and cabinets an old-fashioned charm. Crafted from solid brass, it features two screw holes on each side to provide extra strength for frequent use or heavier furniture. Wherever you use it, this durable pull withstands the test of time.

These full-mortise 6 x 3-inch shutter hinges have a unique curved offset that allows you to throw the shutter clear of the window. Made of heavy-duty forged iron with a rough textured surface, they are a great choice for Colonial or Romantic style homes. The surface is phosphate treated then lacquered, for rust-resistant, long-lasting wear.

The bold and graphic motif on our Oriental-Pattern Sash Lift is one of our favorites. Designed by Branford Lock Works, circa 1885, this striking sash lift displays an open fan and bamboo leaves. Recreated in durable cast-iron, it is available in antique-iron or a matte-black finish.

Secure your shutters against coming storms with this sturdy hurricane slide bolt. With a long catch plate and a 3 1/8-inch throw, it balances the fastening force across both shutters. Made of solid cast iron with a black primer coat.

With a 3 1/4-inch offset, these traditional arch-top pintles are suited for brick or stone houses. Use them to replace worn or damaged pintles, or to build your own custom sized shutter hinges (straps sold separately). Made of heavy-duty galvanized cast iron with a rust-resistant powder-coated finish.

Rugged meets refined in our 6-Inch Classic Hammered-Surface Shutter Dogs. With their elegant profile and hammered texture, they beautifully compliment any style of home. Made of heavy, cast iron, they feature a weather resistant, powder-coated finish. Designed for masonry applications (anchors recommended - not included). Comes complete with lag screws, magnetic holders, and masonry anchors.

These full-mortise 5 x 3-inch shutter hinges have a unique curved offset that allows you to throw the shutter clear of the window. Made of heavy-duty forged iron with a rough textured surface, they are a great choice for Colonial or Romantic style homes. The surface is phosphate treated then lacquered, for rust-resistant, long-lasting wear.

Use these shutter straps to replace worn or missing parts, or to build shutter hinges for your specific needs (mounting pintles sold separately). Designed to work with 1/2-inch diameter pintles, they have a 0-inch offset. Constructed of heavy-duty stainless steel, they feature a durable black powder coated finish.

With a 1 7/8-Inch offset, our Traditional Plate Arch-Top Pintles are suited for wood or stucco homes, with flat window trim. Use them to replace worn or damaged pintles, or to build your own custom sized shutter hinges (straps sold separately). Made of heavy-duty cast iron with a rust-resistant powder-coated finish.

These bold sunflower shutter dogs will add a cheery outlook to any home. Made of heavy duty cast iron, they're finished with a rust resistant black powder coat. Easily mounted to wood (with blocking) or masonry with the included lag bolt.

This wonderfully whimsical rat tail latch is based on an authentic colonial era design. It's made of heavy-duty cast iron with a durable black powder coat to prevent rust. Includes both mortise and surface strikes.

True classics, these scroll design shutter dogs are an elegant choice for any style of home. Made of heavy-duty galvanized steel, they feature a durable black powder coated finish.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (5 1/2-Inch x 3 1/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

An easy-grip ball handle adds an authentic look to our Cast-Iron Surface Door or Shutter Bolt. Ideal for colonial or other rustic home styles, it has a textured surface and durable black powder-coat finish. Three strike plate options allow it to be used on a variety of applications from gates and doors to cabinets.

Our authentic Colonial style 6 3/8-inch slide bolt offers reliable holding power for your doors, gates or shutters. Forged from heavy duty iron 3/16-inch in thickness, it's finished with a rough textured powder-coat.