Truly a classic, these scroll design shutter dogs are an elegant choice for any style of home. Made of heavy duty stainless steel and powder coated black. Easily mounted to masonry with the included lag bolt.

True classics, these plate-mount, scroll design shutter dogs are an elegant choice for any style of home. Made of weather-resistant cast aluminum, they feature a durable black powder coated finish.

Our premium quality transom chain is durable, non-corrosive and long-lasting. Made of solid brass, it comes in 5 hard-to-find finishes! Use this chain on one or both sides of a bottom-hinged, inswing window.

With its crisp edges and oval insert, this simple design works equally well with Colonial, Craftsman or Modern interiors. The low profile is a great choice for windows with blinds or interior shutters (hook style sash lifts can catch or obstruct). Recreated in cast brass from a vintage original, it comes in six popular finishes!

Parliament-style 2 1/2 x 4-inch hinges have been a favorite since the late 19th century. Our authentic reproduction is made of sturdy, solid brass, and features classic ball finials and a removable stainless-steel pin that repels rust. Ideal for deep set casement windows, it comes in your choice of four popular finishes.

This pair of lightweight and sturdy 14 inch stays is designed for small Bahama or Bermuda shutters and made out of aluminum to avoid rust. This set comes with brass pins for attaching the rod to the brackets when the shutter is held open. When the shutter is to be closed during a storm the rods can be removed and the brackets locked together to keep the shutter fastened. The bars can also be cut to smaller lengths if desired. Optional sill mount brackets are included with this set.

This heavy-duty casement adjuster is constructed from solid, cast brass. It’s suited for larger windows, and includes a smooth handle, two sill-mounted keepers, and holes for six opening positions. The lacquered surface preserves the finish for long-lasting wear.

The honest simplicity of Arts & Crafts style is reflected in this versatile (4 3/8-inch center-to-center) brass handle’s design. Use in multiples to add low-key charm to windows, cabinets and drawers. The slightly rounded profile gives it a comfortable feel. Choose from an array of popular finish options.

Square and simple in design, our versatile Transom Latch goes with everything, from Victorian to Mid-Century Modern. The circa 1900 design features all brass parts. The latch housing is stamped sheet brass, while the tongue, hook loop and strike plate are solid, cast brass. Choose from an array of popular finishes! This spring-loaded latch is typically installed at the top of the window sash and operated with a pull chain or pole-mounted transom hook (use transom chains to keep the sash from falling open). The base of the strike is mounted to the inside of the window frame and the catch portion protrudes over the sash, in order to engage the latch.

Use these traditional style shutter straps to replace worn or missing parts, or to build shutter hinges for your specific needs (mounting pintles sold separately). Designed to work with 1/2-inch diameter pintles, they have a 2 1/4-inch offset. Made of powder coated stainless steel.

Our Suffolk-Style No Offset Middle Hinges offer traditional Colonial style. Constructed from stainless steel, they feature a rust-resistant and durable black powder-coated finish. They can be mounted to show either when the shutters are open or closed. Length from end of lag to center of pintle rod is 4 3/4-inch. The lag bolt is 3/8-inch diameter.

New York style strap hinges are one of the most stylish and practical ways of hanging your shutters. This set of four hinges has a 2 1/4-inch offset (4 1/2-inch throw), which is ideal for most brick houses. Hand forged from heavy duty steel, they're galvanized and powder coated to resist rust.

Parliament-style 2 1/4 x 3-inch hinges have been a favorite since the late 19th century. Our authentic reproduction is made of sturdy, solid brass, and features classic ball finials and a removable stainless-steel pin that repels rust. Ideal for deep set casement windows, it comes in your choice of four popular finishes.

These whimsical propeller style tie backs will give your shutters a distinctive look. Made of sturdy stainless steel, they feature a durable black powder coated finish.

True classics, these 6-inch scroll design shutter dogs are an elegant choice for any style of home. Made of weather-resistant cast aluminum, they feature a durable black powder coated finish.

Square and simple in design, this versatile transom latch goes with everything, from Victorian to Mid-Century Modern. The circa 1900 design is made of stamped and cast brass. Choose from 5 popular finishes!

Secure your shutters against coming storms with this sturdy shutter slide bolt. With a long catch plate and a 3 1/4-inch throw, it balances the fastening force across both shutters. Made of galvanized steel, it features a durable black powder coated finish.

True classics, these scroll design shutter dogs are an elegant choice for any style of home. Made of heavy-duty galvanized steel, they feature a durable black powder coated finish.

Parliament-style 2 1/2 x 4 1/2-inch hinges have been a favorite since the late 19th century. Our authentic reproduction is made of sturdy, solid brass, and features classic ball finials and a removable stainless-steel pin that repels rust. Ideal for deep set casement windows, it comes in your choice of four popular finishes.

True classics, these 7-inch scroll design shutter dogs are an elegant choice for any style of home. Made of weather-resistant cast aluminum, they feature a durable black powder coated finish.

Our sleek, solid brass casement latch is pitch-perfect for contemporary interiors. The unique, pivoting handle makes it reversible for use on right or left swing windows, while three included strikes offer multiple installation options. Made of premium forged brass, it's also a striking latch for kitchen or bath cabinets.

With a 2 1/4 inch offset, these narrow pintles work well with wood or stucco homes with flat window trim. Use them to replace worn or damaged pintles or to build your own custom sized shutter hinges (straps sold separately). Made of heavy duty stainless steel which is powder coated black.

Use these shutter straps to replace worn or missing parts, or to build shutter hinges for your specific needs (mounting pintles sold separately). Designed to work with 1/2-inch diameter pintles, they have a 0-inch offset. Constructed of heavy-duty stainless steel, they feature a durable black powder coated finish.

Use these traditional style shutter straps to replace worn or missing parts, or to build shutter hinges for your specific needs (mounting pintles sold separately). Designed to work with 1/2-inch diameter pintles, they have zero offset.