This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (3 3/4-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

Our Pair of No Offset Suffolk-Style 12-inch Strap Hinges with Rectangular Plate Pintles offer traditional Colonial style. Constructed from stainless steel, they feature a rust-resistant and durable black powder-coated finish. They can be mounted to show either when the shutters are open or closed. Length from end of lag to center of pintle rod is 4 3/4-inch. The lag bolt is 3/8-inch diameter.

These bold sunflower shutter dogs will add a cheery outlook to any home. Made of heavy duty cast iron, they're finished with a rust resistant black powder coat. Easily mounted to wood (with blocking) or masonry with the included lag bolt.

The design for this distinctive hook-style sash lock dates to the 1870s. The crisp Eastlake pattern is just as fresh and appealing today. Reproduced in solid, cast iron with a lacquered finish.

This pair of lightweight and sturdy stays is designed for smaller to medium Bahama or Bermuda shutters and made out of aluminum to avoid rust

The Colonial look of our 9 1/4-Inch Heart-Tip Shutter Strap Hinges (1-inch offset) is still popular today! The straps are forged out of steel and the pintles are made of solid, cast iron. They feature a textured surface and rust-resistant, powder-coated finish.

Our Pair of 1 3/4-inch Offset Suffolk-Style Middle Hinges with Narrow Plate Pintles offer traditional Colonial style. Constructed from stainless steel, they feature a rust-resistant and durable black powder-coated finish. They can be mounted to show either when the shutters are open or closed.

This charming Eastlake style sash lift is reproduced from an 1880s original. Made of cast iron, the pattern is crisp and geometric, with a single iris flower at center. Large and durable, it's a good choice for tall or broad sash windows. Offered with a matte black powdercoat or a lacquered antique finish.

With a 1 3/4-inch offset, these traditional arch-top pintles work well with brick veneered homes. Use them to replace worn or damaged pintles or to build your own custom sized shutter hinges (straps sold separately). Made of heavy duty stainless steel which is powder coated black.

When security is a priority, this heavy duty shutter bolt does the job. Crafted from 1/4-inch thick cast iron, it's as strong as they come. Finished with a black powder coat.

This simple Victorian sash window stay is solid cast iron and measures 2 1/2-inch by 2-inch

With a 1 7/8-Inch offset, our Traditional Plate Arch-Top Pintles are suited for wood or stucco homes, with flat window trim. Use them to replace worn or damaged pintles, or to build your own custom sized shutter hinges (straps sold separately). Made of heavy-duty cast iron with a rust-resistant powder-coated finish.

Our Pair of 1 3/4-inch Offset Suffolk-Style Middle Hinges with Plate Pintles offer traditional Colonial style. Constructed from stainless steel, they feature a rust-resistant and durable black powder-coated finish. They can be mounted to show either when the shutters are open or closed.

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (6 1/2-Inch x 3 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

Right out of the late Victorian era, this elegant sash lift showcases its iconic fleur-de-lis design. Reproduced in cast iron, it comes in your choice of two classic finishes.

Despite their name, these rat tail tie backs are an elegant addition to any home. An authentic colonial design, they're made of heavy duty cast iron, then galvanized and finished with a rust-resistant black powder coat. Easily mounted to wood siding.

Sturdy and versatile, our 6-Inch Lag Bolts are designed for masonry or wood applications. They feature a variable offset and a 1/2-inch diameter, which fits some of our L straps (sold separately). Made of galvanized steel with black powder coating. Length from end of lag to center of pintle rod is 6 1/4-inch. The lag bolt is 3/8-inch in diameter.

With a 3/4-inch offset, these narrow pintles work well with wood or stucco homes with flat window trim. Use them to replace worn or damaged pintles or to build your own custom sized shutter hinges (straps sold separately). Made of heavy duty stainless steel which is powder coated black.

These charming, acorn tip hinges were commonly found on Victorians and early 20th century colonials. The hinges are surface mounted and lift off, making it easy to install or remove your shutters. The 1 1/4-inch throw is intended for flush applications.

The design for this distinctive hook-style sash lock dates to the 1870s. The crisp Eastlake pattern is just as fresh and appealing today. Reproduced in solid, cast iron with a black powder coated finish.

Use these traditional style shutter straps to replace worn or missing parts, or to build shutter hinges for your specific needs (mounting pintles sold separately). Usually used with New York or L style shutter hinges as a middle support. Designed to work with 1/2 inch diameter pintles, they have a 3/4 inch offset. Made from 1/8 inch thick forged stainless steel with a black powder coating.

When security is a priority, this heavy duty shutter bolt does the job. Forged from 3/16-inch thick 304 stainless steel, it's as strong as they come. Finished with a black powder coat.

A rough textured surface gives this shutter ring pull an old-world feel. Use it on Colonials, Tudors or any Romantic style of home. Cast from solid iron, nearly 1/4-inch thick! Powder coated.

Sturdy and versatile, our lag bolt pintles are designed for masonry or wood applications. They have a variable offset and a 3/8-inch diameter. Made of galvanized steel and powder coated black.