This Large Casement Latch in Antique-By-Hand is made of solid, non-corrosive brass. The handle and base are riveted for extra strength, making it a fine choice for large or hard to close windows. It comes in our exclusive Antique by-Hand - a finish that ages gracefully over time into a beautiful natural patina. Includes three strike plate options.

Bring Victorian style to your decor with our authentic reproduction shutter bar. As versatile as it is functional, this ornate latch is ideal for securing a variety of interior window shutter types, as well as cabinet, bi-fold, and other lightweight doors. Crafted from solid brass, it comes in our exclusive Antique by-Hand finish which ages gracefully over time into a beautiful natural patina. Reversible for both left and right hands.

This charming Eastlake style sash lift is reproduced from an 1880s original. Made of cast iron, the pattern is crisp and geometric, with a single iris flower at center. Large and durable, it's a good choice for tall or broad sash windows. Offered with a matte black powdercoat or a lacquered antique finish.

Hook style sash lifts are a perennial favorite. The simple, beveled edge design dates from the Victorian era, but works with everything from Colonial Revival to Mid-Century Modern. Made of stamped sheet brass with our living antique finish.

When security is a priority, this heavy duty shutter bolt does the job. Crafted from 1/4-inch thick cast iron, it's as strong as they come. Finished with a black powder coat.

This simple Victorian sash window stay is solid cast iron and measures 2 1/2-inch by 2-inch

With a 1 7/8-Inch offset, our Traditional Plate Arch-Top Pintles are suited for wood or stucco homes, with flat window trim. Use them to replace worn or damaged pintles, or to build your own custom sized shutter hinges (straps sold separately). Made of heavy-duty cast iron with a rust-resistant powder-coated finish.

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (6 1/2-Inch x 3 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

Right out of the late Victorian era, this elegant sash lift showcases its iconic fleur-de-lis design. Reproduced in cast iron, it comes in your choice of two classic finishes.

square and simple in design, our versatile transom latch goes with everything, from Victorian to Mid-Century Modern. The circa 1900 design features all brass parts. The latch housing is stamped sheet brass, while the tongue, hook loop and strike plate are solid, cast brass. Hand-finished with our living antique patina! This spring-loaded latch is typically installed at the top of the window sash and operated with a pull chain or pole-mounted transom hook (use transom chains to keep the sash from falling open). The base of the strike is mounted to the inside of the window frame and the catch portion protrudes over the sash, in order to engage the latch.

Parliament-style 2 1/4 x 3-inch hinges have been a favorite since the late 19th century. Our authentic reproduction is made of sturdy, solid brass, and features classic ball finials and a removeable stainless-steel pin that repels rust. Ideal for deep set casement windows, it comes in our exclusive Antique by-Hand - a finish that ages gracefully over time into a beautiful natural patina.

Despite their name, these rat tail tie backs are an elegant addition to any home. An authentic colonial design, they're made of heavy duty cast iron, then galvanized and finished with a rust-resistant black powder coat. Easily mounted to wood siding.

These charming, acorn tip hinges were commonly found on Victorians and early 20th century colonials. The hinges are surface mounted and lift off, making it easy to install or remove your shutters. The 1 1/4-inch throw is intended for flush applications.

The design for this distinctive hook-style sash lock dates to the 1870s. The crisp Eastlake pattern is just as fresh and appealing today. Reproduced in solid, cast iron with a black powder coated finish.

The Filigree 4-foot cremone bolt is both functional and decorative, and its raised patterns reflect Classical and Victorian influences. Made from solid brass, it is available in our Antique-By-Hand finish which ages gracefully over time. It is ideal for smaller casement windows, cabinets, and furniture.

A rough textured surface gives this shutter ring pull an old-world feel. Use it on Colonials, Tudors or any Romantic style of home. Cast from solid iron, nearly 1/4-inch thick! Powder coated.

Our Casement Latch with Bulb Handle in Antique-By-Hand delivers smooth function and long-lasting wear. Extra thick and heavy-duty, it's a good choice for large windows. Forged in solid brass, it comes in our exclusive, living finish that ages gracefully over time into a beautiful natural patina. With its unique reversible handle and two strike options (mortise and surface), it is a wonderful latch for cabinets, gates or shutters as well!

Rugged meets refined in these large size classic scroll design shutter dogs. With their elegant profile and hammered texture they beautifully compliment any style of home. Made of heavy duty cast iron, finished with a rust resistant black powder coat. Designed for masonry applications.

This sturdy, barrel style transom latch is made of heavy-duty cast brass. The shaft is spring-loaded for vertical installation and keeps the window tightly fastened.
This latch is typically installed at the top of the window sash and operated with a pull chain or pole-mounted transom hook (use transom chains to keep the sash from falling open). Hand-finished with our living antique patina!

These large and finely cast scallop design shutter dogs are ideal for coastal homes. Made of heavy duty cast iron, they're finished with a rust resistant black powder coat. Easily mounted to wood or masonry with the included lag bolt.

The Colonial look of our 9 1/4-Inch Heart-Tip Shutter Strap Hinges (no offset) is still popular today! The straps are forged out of steel and the pintles are made of solid, cast iron, both galvanized. They feature a textured surface and rust-resistant, powder-coated finish.

Popular throughout the Mid-Atlantic, these Small Georgetown Style Shutter Dogs are distinguished by their artful curl. Hand-forged from heavy duty iron, they are powder coated to resist rust. Easily mounted to masonry with the included lag bolt.

This set of Acme Cast-Iron Mortise Shutter Hinges (9-Inch x 3 15/16-Inch) contains everything you need to hang one pair of shutters. The mid-Victorian design features a unique, patented pintle that keeps shutters securely in place. Heavy-duty and authentic.

This extra long hook & eye also works great as a Bahama shutter stay. Use it to hold them open or securely closed. A satin black powder coat helps prevent rust and coordinates with most exterior hardware.