This rugged colonial style, heart-tip pull lends a bit of country flavor to your cabinets, drawers, or windows. It’s made in the USA of hand forged, textured iron with a durable, matte-black lacquer finish. Whether your home’s décor is early-American or modern, this sturdy handle fits right in.

With a 1 7/8-Inch offset, our Traditional Plate Arch-Top Pintles are suited for wood or stucco homes, with flat window trim. Use them to replace worn or damaged pintles, or to build your own custom sized shutter hinges (straps sold separately). Made of heavy-duty cast iron with a rust-resistant powder-coated finish.

Dress up your cabinets or furniture with this stylish Colonial Revival pull. This elegant beaded knob is precision cast in Italy, it comes in your choice of antique patinas. Standard sized knob to suit most applications.

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (6 1/2-Inch x 3 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

For added charm to your décor, look no further than this petite knob featuring a beautifully detailed flower, ideal for small drawers and cabinet doors. Made in Italy and precision cast in zinc, it comes in a range of special finishes.

At once charming and rugged, this heart-design entry set is the finishing touch for your Colonial or country-style home. You get the look of a hand-wrought rim-latch with the security of a modern mortise lock. Constructed of heavy-duty forged iron, its surface is phosphate treated then lacquered, for rust-resistant, long-lasting wear.

With a large circle detail and a straight support, this bracket is an all-around choice for your shelves, fitting with any style. Made from heavy cast iron with a matte black finish.

These small iron door knobs are ideal for authentic colonial interiors or wherever an understated hardware treatment is desired. Cast from solid iron with antique iron finish, they're as durable as they are attractive.

The simple, yet elegant 3 1/2-inch steeple tip door hinge has been around since the late 19th century. Our authentic reproduction hinge has a loose pin with attached finial, slotted and Phillips wood screws, and heavy duty 1/8-inch thick leaves - just like the originals. Made of solid cast iron finished with a versatile matte black powder coat.

You'll love the rustic charm of this traditional bean motif door knocker. Based on a 1930's colonial revival design, it's made from forged iron with hammered edges and a durable matt black finish. Substantial and heavy, it produces a resounding bang. Surface mounted.

This hard-to-find 3 1/4-Inch Rim-Lock Keeper is designed for use with antique rim locks. Made of heavy-duty cast iron and finished with a durable, rust-resistant black powder coating.

These charming, acorn tip hinges were commonly found on Victorians and early 20th century colonials. The hinges are surface mounted and lift off, making it easy to install or remove your shutters. The 1 1/4-inch throw is intended for flush applications.

The Henry Street 3-light wall lantern is a study in elegance, starting with the rich and velvety Colonial Iron finish. Design details have been carefully considered – note how the frame’s gentle peaked curves are repeated in the stepped roof and decorative backplate. Seedy glass adds to this fixture’s vintage appeal, using candle flame bulbs can further heighten the ambiance. An excellent choice to elevate an entry.

Hand-forged from solid iron, this rugged arch-top push plate presents an authentic colonial appearance. Nearly 3/8-inch thick, with a hammered beveled edge, it stands up to heavy use. Its surface is phosphate treated then lacquered, for rust-resistant, long-lasting wear.

This simple, yet elegant 4-inch steeple tip door hinge has been around since the late 19th century. Our authentic reproduction hinge has a loose pin with attached finial, slotted and Phillips wood screws, and heavy duty 1/8-inch thick leaves - just like the originals. Made of heavy duty cast iron with a lacquered finish.

A rough textured surface gives this shutter ring pull an old-world feel. Use it on Colonials, Tudors or any Romantic style of home. Cast from solid iron, nearly 1/4-inch thick! Powder coated.

Our authentic New England-style Strap Hinge with Whale-Tip Design is the perfect combination of charm and durability. This traditional accent is made of cast iron and features a textured surface and black powder-coat finish. Choose from two length options.

Our small cast iron rosettes are ideal for authentic colonial interiors. They look wonderful paired with small round iron knobs or with any of our porcelain and iron rim lock knobs.

Rugged meets refined in these large size classic scroll design shutter dogs. With their elegant profile and hammered texture they beautifully compliment any style of home. Made of heavy duty cast iron, finished with a rust resistant black powder coat. Designed for masonry applications.

This authentic spear-tip strap hinge with a smooth iron surface adds a sophisticated touch to your colonial interior. Our versatile design with loose pin and reversible pad allows for full or half-surface application. For doors up to 90lbs.

Our Heavy-Duty Bean Strap Hinge brings Early-American flair to your decor. Made of solid-forged iron, the surface is phosphate treated then lacquered, for rust-resistant, long-lasting wear. With a 300 lb. rating, it is ideal for large entry doors, garages, and gates.

Bring early-American flavor to your decor with our heavy-duty dummy strap hinges. Made of forged ireon, the feature hand-hewn edges and traditional bean tips. The surface is phosphate treated then lacquered, for rust-resistant, long-lasting wear. For functional applications, combine with a heavy iron butt hinge to simulate a working strap hinge.

Rugged and plain spoken, our Iron Bin Pull with Lacquered-Antique Finish suits the rustic character of early Colonial homes. As sturdy as they come, it will hold up to years of heavy use. The antiqued, lacquered finish is designed to prevent rust.

These large and finely cast scallop design shutter dogs are ideal for coastal homes. Made of heavy duty cast iron, they're finished with a rust resistant black powder coat. Easily mounted to wood or masonry with the included lag bolt.