As we navigate this unprecedented situation, we continue our goal of providing an exceptional customer experience. If you have any questions or concerns, do not hesitate to contact our customer service team.
House of Antique Hardware is following local, state, and federal guidelines to ensure the safety of our employees and customers.
Designed for 3-Way operation, this toggle style incandescent dimmer adjusts the light level of a fixture operated from two locations. A standard toggle controls the On/Off function, while an inconspicuous slider controls the brightness. Rated for residential use at 600 Watts, 60HZ and 120VAC. UL Listed and CSA certified.
To mount this dimmer side by side the front tabs are snapped off, which decreases the power rating. If mounted side by side with one other dimmer the wattage will be 500W, and when mounted between two other dimmers the wattage will be 400W. Instructions are included.
(NOT FOR USE WITH NON-DIMMABLE LED OR CFL BULBS, FLUORESCENT FIXTURES, FANS OR LOW VOLTAGE)
We reccommend that electrical devices and light fixtures be installed by a licensed electrician. This should ensure that proper safety measures are taken and local electrical codes are met. Learn about hardware >
Product Videos
Reviews
Product Q & A
Adding Items to Cart...
Step 1 Choose Your Function
Passage
Complete non-locking latch set used on most interior doors
Privacy
Complete locking latch set for bedroom and bathroom doors
Double Dummy
Non-latching set with two handles for non-bored closet and double doors
Single Dummy
Non-latching handle for non-bored closet and pantry doors
Step 2 Choose Your Backset
The "backset" is the distance from the edge of your door to the center of the hole bored in your door. Choose from 2⅜" (standard) or 2¾". Measure carefully to ensure proper fit.
or
Choosing a Keying Option for Your Entry Door Set
Single Cylinder Lock:
Key operated from the outside, thumbturn operated from the inside.
Double Cylinder Lock:
Key operated from both inside and outside. Note: Key required for egress.
How to Determine Your Backset
The "backset" is the distance from the edge of your door to the center of the hole bored in your door. Choose from 2⅜" (standard) or 2¾". Measure carefully to ensure proper fit.
or
How to Determine Your Backset
The "backset" is the distance from the edge of your door to the center of the hole bored in your door. Choose from 2½" or 2¾". Measure carefully to ensure proper fit.
or
How to Determine Handing
Stand in the frame of the door with your back to the hinges. If the door swings to your right, it is a RIGHT HAND door. If the door swings to your left, it is a LEFT HAND door.
RIGHT HANDED (RH)
LEFT HANDED (LH)
How to Determine Handing
Stand in the frame of the door with your back to the hinges. If the door swings to your right, it is a RIGHT HAND door. If the door swings to your left, it is a LEFT HAND door.
Brown 
Ivory 
White 
Almond 
Light 
Black 
At House of Antique Hardware