Colonial style buzzer button made of wrought steel features classic styling and a solid steel backplate. The rough textured finish is available in 2 colors and the easy surface mount installation is a snap to install! Features a lighted button for better visibility.

A classic border mades this Round Rope-Pattern Keyhole Cover a favorite for Colonial-Revival style furniture and cabinets. It features a simple design finely crafted from stamped brass, a great choice for desks, amoires, and hutches alike. Choose from an antique-brass finish, or our unlacquered version that ages gracefully over time, just the the antique originals.

With its rugged texture and weathered finishes, our Wrought Steel Wall-Mount Door Stop with Arched Classic and Rubber Bumper is a perfect choice for your Colonial, Tudor or other rustic style home. Each back plate is hot forged, then distressed and relieved to achieve an appearance of graceful wear. Designed to be installed at knob height behind the door.

This fine reproduction of a late 18th century Chippendale-style pull is a beautiful enhancement for drawers and cabinets alike. Cut from sheets of solid brass, it’s ideal for new furniture, or as a replacement for a worn or damaged piece. It features a smooth, elegant handle for a pleasant feel, and the sturdy back plate will stand up to years of repeated use. The polished finish is left unlaquered, allowing it to age gracefully, just like the antique originals.

With its rugged texture and weathered finishes, our Doorbell Button with Rectangular Rosette is a perfect choice for your Colonial, Tudor or other rustic style home. Made of solid steel, it features a lighted button. Please note: this electric button is designed to operate a standard door chime located within a home. The chime is not included (available at most home improvement stores) and must be hardwired into the wall.

A pair of stylized griffins gives this Chippendale 2-inch center-to-center pull a heraldic flair. The exuberant cut and pierced design dates from the 1700s, and is perfectly suited to colonial style furniture or cabinets throughout your home. Made of solid brass, with a brightly polished finish.

Our 3 3/4-Inch Threaded Doorknob Swivel Spindle facilitates new or vintage doorknobs with threaded shanks of 20 TPI. Used with privacy latches and mortise locks, its zinc-plated steel construction provides smooth operation and long-lasting wear. It features a standard 7mm thickness.

Widely used in wooden boat construction, these galvanized steel nails are also useful for framing and face-nailing floors. Hot dipped in zinc for rust resistance they are ideal for exterior applications. Rooted in age-old tradition, our wide array of period restoration nails are cut much the same way they were 150 years ago. The result? Outstanding durability and holding power, designed to last a lifetime. Once you've experienced the quality and performance of our vintage reproductions, they'll surely become your preferred choice for a variety of applications. Made in the USA.

This classic keyhole cover is a favorite for Colonial-Revival style furniture and cabinets. Its simple diamond design is finely stamped in solid brass, a great choice for desks, amoires, and hutches. The polished finish is left unlaquered, allowing it to age gracefully, just like the antique originals.

A classic ringed border makes the Vertical Oval Stamped-Brass Keyhole Cover a favorite for Colonial-Revival style furniture and cabinets. It features a simple design finely crafted from stamped brass, a great choice for desks, amoires, and hutches alike. The polished finish is left unlaquered, allowing it to age gracefully, just like the antique originals.

These round-headed steel brads are popular for cabinet work and selected furniture applications. Rooted in age-old tradition, our wide array of period restoration square nails are cut much the same way they were 150 years ago. The result? Outstanding durability and holding power, designed to last a lifetime. Once you've experienced the quality and performance of our vintage reproductions, they'll surely become your preferred choice for a variety of applications. Made in the USA.

Embracing vintage plumbing popular in the early 20th-century, the Fuller Cabinet Knob (2 1/8-Inch Diameter) brings understated, yet fashionable style to your kitchen, bath, or furniture. This whimsical design is offered in a host of popular finish options. Comes complete with mounting hardware.

These galvanized steel shingle nails have blunt points to reduce wood splints and the cut nail shank holds tight in shingles and siding. They are hot dipped in zinc for rust resistance in exterior applications. Rooted in age-old tradition, our period restoration square nails are cut much the same way they were 150 years ago. The result? Outstanding durability and holding power, designed to last a lifetime. Once you've experienced the quality and performance of our vintage reproductions, they'll surely become your preferred choice for a variety of applications. Made in the USA.

This heavy-duty swivel spindle is designed to facilitate new or vintage doorknobs with threaded shanks of 20 TPI. Used with privacy latches and mortise locks, its hardened steel construction provides smooth operation and long-lasting wear. At 5-inch in length, it's ideal for thicker doors. Features a 3/8-inch thickness.

Embracing vintage plumbing popular in the early 20th-century, the Fuller Cabinet Knob (1 5/16-Inch Diameter) brings understated, yet fashionable style to your kitchen, bath, or furniture. This whimsical design is available in a host of popular finish options. Comes complete with mounting hardware.

This fine reproduction of a late 18th century Chippendale-style keyhole cover is a beautiful enhancement for drawers and cabinets alike. Cut from sheets of solid brass, it's ideal for new furniture, or as a replacement for a worn or damaged piece. The polished finish is left unlaquered, allowing it to age gracefully, just like the antique originals.

Give your stem-and-plate caster a polished look with this decorative caster ring. Made of solid brass for durability, it comes in your choice of two classic finishes. With a 15/16-inch inside diameter, it's designed to fit a 7/8-inch caster plate.

This narrow keyhole escutcheon is designed for vertical mounting on cabinet or furniture doors. Designed in the Chippendale style of the late 18th century, it's ideal for a colonial breakfront, secretary, or wardrobe. Made of solid brass, the polished suface is left unlaquered, allowing it to age gracefully, just like the antique originals.

Our Fuller Cabinet Pull (6 5/16-Inch Center-to-Center) brings understated, yet fashionable style to your kitchen, bath, or furniture. This traditional design is offered in a host of popular finish options. Comes complete with mounting hardware.

7mm Half spindle for doorknobs. Steel. Zinc plated. For mortise locks or rim locks where only one doorknob is used. Secured with a screw at one end.

A pair of stylized griffins gives this Chippendale 2 1/2-inch center-to-center pull a heraldic flair. The exuberant cut and pierced design dates from the 1700s, and is perfectly suited to colonial style furniture or cabinets throughout your home. Made of solid brass, with a brightly polished finish.

This sturdy spindle is designed to facilitate new or vintage doorknobs with threaded shanks of 18 TPI. Used with privacy latches and mortise locks with larger hubs, its hardened steel construction provides smooth operation and long-lasting wear. At 4 3/4-inch in length, it's ideal for thicker doors. Features two 3/8-inch solid centers and a standard 9/32-inch thickness.

This fine reproduction of a late 18th century Chippendale-style 2 1/2-inch center-to-center pull is a beautiful enhancement for drawers and cabinets alike. Cut from sheets of solid brass, it’s ideal for new furniture, or as a replacement for a worn or damaged piece. It features a smooth, elegant handle for a pleasant feel, and the sturdy back plate will stand up to years of repeated use. The polished finish is left unlaquered, allowing it to age gracefully, just like the antique originals.

Our tailored New York back plate has timeless appeal. Whether your style is Victorian, Craftsman, or Mid-Century modern, this spare, beveled design will fit right in. Designed for use on the exterior side of a door, it includes a knob collar and cylinder hole for use on entry mortise locks. Made of solid, stamped brass, it comes in your choice of five popular finishes.