Description

Timeless, understated, and ever-so refined, the classic pairing of octagonal crystal glass knobs and round rosettes is always a tasteful choice. With an array of colors and popular finishes to choose from, every door in your house will shine! Finely crafted from solid forged brass, this handsome door set will provide a lifetime of quality and enjoyment.

Door set dimensions: crystal glass octagonal doorknobs measure 2 1/4" across. Rosettes measure 2 1/2" diameter.

Latch dimensions: Latch case: 7/8" diameter. Latch face plate: 2 1/4" H x 1" W.
Standard door range: 1 3/8" to 1 3/4" thick.

Door Sets

Door Set Functions
Function	Description	Includes
Passage	Latch but no lock - The knobs or levers turn and operate a latch but there is no locking ability. Typically found on interior doors that don't need to lock, or doors with a separate deadbolt.	2 Knobs or Levers 2 Backplates or Rosettes 1 Passage Latch with matching face plate 1 Matching strike plate Matching screws 1 Passage Spindle
Privacy	Latch and lock - This set has a privacy pin next to the inside knob or lever which is pushed in to lock. The door is unlocked by turning the knob or lever on the inside and can also be unlocked from the outside by pushing a small screwdriver through the emergency release hole. Typically found on bedroom or bathroom doors.	2 Knobs or Levers 2 Backplates or Rosettes 1 Privacy Latch with matching face plate and privacy pin 1 Matching strike plate Matching screws 1 Privacy Spindle
Double Dummy	No latch or lock - the knobs or levers on this doorset don't turn or operate a latch. Typically found on closet doors or the passive door in a set of double doors. This set can't be installed on a pre-drilled door.	2 Knobs or Levers 2 Backplates or Rosettes Matching Screws 2 Dummy Spindles
Single Dummy	No latch or lock - Like a cabinet knob, the knob or lever mounts on one side of the door and doesn't turn or operate a latch. Typically found on closet or pantry doors. This set can't be installed on a pre-drilled door.	1 Knob or Lever 1 Backplate or Rosette Matching screws 1 Dummy Spindle