These brackets made of plastic and stainless steel can be used with all of our lag mount shutter dogs. Fits up to a 3/8-inch diameter lag bolt and is easy to adjust. The brackets hold the shutter panel and dog together firmly to reduce rattling in the wind.

With a 3 1/4-inch offset, these narrow pintles work well with brick or stone houses. Use them to replace worn or damaged pintles or to build your own custom sized shutter hinges (straps sold separately). Made of heavy duty stainless steel which is powder coated black.

Our authentic Colonial style 5 1/2-inch slide bolt offers reliable holding power for your doors, gates or shutters. Forged from heavy duty iron 3/16-inch in thickness, it's finished with a rough textured powder-coat.

This heavy-duty casement adjuster is constructed from solid, cast iron. The handle is approximately 3/16-inch thick - well suited to large or heavy windows. It includes two sill mounted keepers and holes for four opening positions. Offered in durable matte black, lacquered antique iron or rusted iron finishes, it's a great choice for colonial, Tudor, Spanish or rustic country houses!

Our set of 4 1/8-inch Connecticut shutter hinges offer traditional Colonial style. Constructed from cast iron, they feature a textured surface and rust-resistant, durable black powder-coated finish. Sold as a complete set for two shutters. Can be mounted on wood or masonry with the included lag bolt (masonry lag shield anchors not included).

Sturdy and versatile, our lag bolts are designed for masonry or wood applications. Made of galvanized steel, they feature a durable black powder coated finish.

Our Premium Spot Number-10 Sash Cord is typically used for counterbalance systems on double-hung windows. Made of premium-quality cotton yarn, a nylon fiber core gives it added strength and durability with a coating that is chemical, weather and heat resistant. It is suited for use on new construction, or for updating a worn or damaged system.

Replacement eye piece for hook and eye sets. Made of heavy duty cast iron, galvanized and finished with a rust resistant black powder coat.. Will accept a hook up to 5/16-inch in diameter.

Our heavy-duty, cast brass sash lock is a House of Antique Hardware exclusive! This distinctive design, with its tall half-cup keeper, is the type found in early 20th century schools, offices and commercial buildings, as well as fine homes. Made of durable, non-rusting cast brass, it holds your windows securely in place. It comes in our exclusive Antique by-Hand finish which ages gracefully over time into a beautiful natural patina.

Use these traditional style shutter straps to replace worn or missing parts, or to build shutter hinges for your specific needs (mounting pintles sold separately). Ideal for use with New York or L style shutter hinges as a middle support. Designed to work with 3/8-inch diameter pintles, they have a 1 1/4-inch offset. Made from 1/8-inch thick forged stainless steel, they feature a durable black powder coated finish.

With a rustic, yet refined presence, our Solid-Bronze L-Handle Casement Fastener (Left Hand) suits a variety of interiors. The hand-applied finish ages gracefully, with frequently touched areas exposing the natural shades of the bronze, while other areas oxidize further. The result? An elegant and timeless display of contrasting color variations. Handcrafted from the finest-quality materials, each piece has its own, unique character.

With a 2 1/4-inch offset, these traditional arch-top pintles work well with brick veneered homes. Use them to replace worn or damaged pintles or to build your own custom sized shutter hinges (straps sold separately). Made of galvanized steel, which is powder coated black.

With a 3/4-inch offset, these traditional arch-top pintles work well with wood or stucco homes with flat window trim. Use them to replace worn or damaged pintles or to build your own custom sized shutter hinges (straps sold separately). Made of galvanized steel, which is powder coated black.

Our Victorian-style Bermuda Shutter Fasteners are typically paired with Clarks Tip or full mortise-type shutter hinges. The catch is sill mounted, while the hook mounts to the lower front of the shutter. Made of cast-iron, they feature a weather resistant, powder-coated finish.

This handsome shutter bolt is micro sized and is best suited for small shutters. The curled handle is forged iron and the base plate is cast. Rough textured with a satin black powder coat.

Our Solid Brass 11 1/2-Inch Casement Stay with Curly Handle is equally at home in Colonial, Tudor, or Spanish-style homes. The curled tail is delightfully decorative and practical as well, making it easy to grasp and lift. Extra thick and heavy-duty, it's a good choice for large windows. Forged in solid brass, it is left unlacquered, allowing it to age gracefully over time just like the antique originals.

Our Premium Spot Number-12 Sash Cord is typically used for counterbalance systems on double-hung windows. Made of premium-quality cotton yarn, a nylon fiber core gives it added strength and durability with a coating that is chemical, weather and heat resistant. It is suited for use on new construction, or for updating a worn or damaged system.

Rats are not always given credit for having aesthetic appeal. However, in the case of these lag mount Traditional Rat Tail Stays, the curve of their tails has inspired a charming decorative element. Install these to hold shutters open while adding a touch of natural world whimsy to your home’s exterior.

Use these traditional style shutter straps to replace worn or missing parts, or to build shutter hinges for your specific needs (mounting pintles sold separately). Designed to work with 1/2-inch diameter pintles, they have a 3/4-inch offset. Made from galvanized steel with a durable black powder coated finish.

Our sturdy Bean-Tip Shutter Strap Hinges with 1/2-inch offset combine Colonial-style with modern, stainless-steel construction. The surface is phosphate treated then lacquered, for rust-resistant, long-lasting wear. Reversible for right or left-handing, they are easy to install and maintain.

This Romantic Revival shutter bolt is tailor made for Tudor, Cottage, or French Country style homes. The hammered back plate and curled bolt give it a wonderful artisan character. Made of rust-proof cast aluminum with a satiny black powder coat.

Customize the offset of your NY-style pintle with our sturdy shim. It works by adding height to the pintle, which connects with the hinge, to make the shutter fully operable. This durable plastic design is suited for exterior applications.

Despite their name, these rat tail tie backs are an elegant addition to any home. An authentic colonial design, they are made of weather-resistant cast aluminum and feature a durable black powder coated finish.

With a 2 1/4-inch offset, these jamb type pintles mortise into the window frame like a door hinge. Use them to replace worn or damaged pintles or to build your own custom sized shutter hinges (straps sold separately). Made of galvanized steel, which is powder coated black.