Our Pair of 1 3/4-inch Offset Suffolk-Style L Hinges with Plate Pintles offer traditional Colonial style. Constructed from stainless steel, they feature a rust-resistant and durable black powder-coated finish. They can be mounted to show either when the shutters are open or closed.

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (5 1/2-Inch x 3 1/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

Use these rustic Colonial 18-inch shutter straps to replace worn or missing parts, or to build shutter hinges for your specific needs (mounting pintles sold separately). Designed to work with 1/2-inch diameter pintles, they have a 1-inch offset. Made of galvanized steel and powder coated to resist rust.

With a 3/4 inch offset, these simple square pintles work well with wood or stucco homes with flat window trim. Use them to replace worn or damaged pintles or to build your own custom sized shutter hinges (straps sold separately). Made of heavy duty forged steel which is powder coated black.

Use these traditional style shutter straps to replace worn or missing parts, or to build shutter hinges for your specific needs (mounting pintles sold separately). Designed to work with 1/2-inch diameter pintles, they have a 3/4-inch offset. Made from stainless steel with a durable black powder coated finish.

Slide bolts are a smart and easy way to secure your shutters while adding decorative charm. Simple and elegant, the 11 inch slide bolt has a classic look that works well with different architectural styles, blending nicely with traditional shutter hardware. Constructed from rust resistant stainless steel, this durable bolt is built to last.

Our authentic 6 1/4-inch Connecticut-style shutter hinges are easy to install and maintain. The straight straps are mounted on simple, L-shaped lag bolt pintles that drive directly into the window surround or masonry. Made of heavy-duty stainless steel, the smooth surface is phosphate treated then lacquered, for rust-resistant, long-lasting wear.

A rough textured surface gives this shutter ring pull an old-world feel. Use it on Colonials, Tudors or any Romantic style of home. Forged from 304 stainless steel, nearly 1/8-inch thick! Powder coated.

With a 5 1/4-inch offset, these rustic New York style pintles work well with brick or stone houses.Use them to replace worn or damaged pintles or to build your own custom sized shutter hinges (straps sold separately). Made of galvanized steel which is powder coated black.

Mounted with a simple eye-bolt, this ring style shutter pull is as understated as it gets. The 1 5/8-inch diameter ring is made of galvanized steel with a black finish.

Use these traditional style shutter straps to replace worn or missing parts, or to build shutter hinges for your specific needs (mounting pintles sold separately). Commonly used with New York or L style shutter hinges as a middle support. Designed to work with 1/2-inch diameter pintles, they have a 1 3/4-inch offset. Made from stainless steel with a durable black powder coated finish.

Nylon resin shim for adjusting the projection of narrow plate shutter pintles to match the offset of the hinge strap.

Use these traditional style shutter straps to replace worn or missing parts, or to build shutter hinges for your specific needs (mounting pintles sold separately). Designed to work with 1/2-inch diameter pintles, they have a 1/2-inch offset. Made of powder coated stainless steel.

When hanging sash weights for double-hung windows, our Brass-Plated Cord Clamps (3/8-1/2-Inch) are used to secure a loop at the end of the sash cord instead of a knot. These sturdy fasteners enable the weights to stay in place, while providing a cleaner look. Made of solid steel, this version is designed for #12 cord.

When hanging sash weights for double-hung windows, our Brass-Plated Cord Clamps (5/16-Inch) are used to secure a loop at the end of the sash cord instead of a knot. These sturdy fasteners enable the weights to stay in place, while providing a cleaner look. Made of solid steel, this version is designed for #10 cord.

This sturdy ring pull makes it easy to close your shutters from inside your home. The cast aluminum mounting plate has a rugged, hand-hammered texture, while the steel ring has a forged appearance. The surface is phosphate treated then lacquered, for rust-resistant, long-lasting wear.

Our Magnetic Shutter-Dog Holders prevent the shutter dog from over rotating, while the magnet holds the dog against the shutter to greatly reduce wind rattling. To preserve the classic look, these holders are virtually invisible. Made of stainless-steel with a nickel-plated magnet, they feature a weather-resistant, powder-coated finish.

With a 3 1/4 inch offset, these simple square pintles work well with wood or stucco homes with flat window trim. Use them to replace worn or damaged pintles or to build your own custom sized shutter hinges (straps sold separately). Made of heavy duty forged steel which is powder coated black.

With a 2 1/4 inch offset, these simple square pintles work well with wood or stucco homes with flat window trim. Use them to replace worn or damaged pintles or to build your own custom sized shutter hinges (straps sold separately). Made of heavy duty forged steel which is powder coated black.

With a 1 3/4 inch offset, these simple square pintles work well with wood or stucco homes with flat window trim. Use them to replace worn or damaged pintles or to build your own custom sized shutter hinges (straps sold separately). Made of heavy duty forged steel which is powder coated black.

Use these traditional style shutter straps to replace worn or missing parts, or to build shutter hinges for your specific needs (mounting pintles sold separately). Usually used with New York or L style shutter hinges as a middle support. Made from 1/8 inch thick forged galvanized carbon steel with a black powder coating.

Nylon resin shim for adjusting the projection of standard sized plate pintles to match the offset of the hinge strap

When hanging sash weights for double-hung windows, our Ferrules (3/8-Inch) are used to secure a loop at the end of the sash cord. Ideal for cable-core cords, these sturdy fasteners enable the weights to stay in place. Made of solid aluminum, this version is designed for #12 cord.

When hanging sash weights for double-hung windows, our Ferrules (5/16-Inch) are used to secure a loop at the end of the sash cord. Ideal for cable-core cords, these sturdy fasteners enable the weights to stay in place. Made of solid aluminum, this version is designed for #10 cord.