Arts and Crafts Single-Cylinder Deadbolt
Description
Sturdy and spare, yet thoughtfully designed, our Arts and Crafts Single-Cylinder Deadbolt recalls the artisanal hardware of the movement. The slightly irregular pattern and pyramid nail heads reinforce the hand-worked look. Finely crafted from forged brass, it comes in three popular finish options.
Dimensions: 2 1/2" H x 2 1/2" W.
Projection: 9/16" Exterior, 1 1/4" Interior.
Plate thickness: 5/16".
Faceplate: 2 1/4" T x 1" W. Strike Plate: 2 3/4" T x 1 1/8" W.
Bolt Housing: 15/16" diameter x 3 1/4" (2 3/8" Backset). Cylinder Housing: 2 5/8" W. It uses a Schlage® C keyway and has a hardened steel bolt with a 1" throw.
Standard door range: 1 3/4" - 2 1/8" thick.
Dimensions: 2 1/2" H x 2 1/2" W.
Projection: 9/16" Exterior, 1 1/4" Interior.
Plate thickness: 5/16".
Faceplate: 2 1/4" T x 1" W. Strike Plate: 2 3/4" T x 1 1/8" W.
Bolt Housing: 15/16" diameter x 3 1/4" (2 3/8" Backset). Cylinder Housing: 2 5/8" W. It uses a Schlage® C keyway and has a hardened steel bolt with a 1" throw.
Standard door range: 1 3/4" - 2 1/8" thick.
Door Sets
| Door Set Functions | ||
| Function | Description | Includes |
Passage | Latch but no lock - The knobs or levers turn and operate a latch but there is no locking ability. Typically found on interior doors that don't need to lock, or doors with a separate deadbolt. |
|
Privacy | Latch and lock - This set has a privacy pin next to the inside knob or lever which is pushed in to lock. The door is unlocked by turning the knob or lever on the inside and can also be unlocked from the outside by pushing a small screwdriver through the emergency release hole. Typically found on bedroom or bathroom doors. |
|
Double Dummy | No latch or lock - the knobs or levers on this doorset don't turn or operate a latch. Typically found on closet doors or the passive door in a set of double doors. This set can't be installed on a pre-drilled door. |
|
Single Dummy | No latch or lock - Like a cabinet knob, the knob or lever mounts on one side of the door and doesn't turn or operate a latch. Typically found on closet or pantry doors. This set can't be installed on a pre-drilled door. |
|
Included Hardware
Pictured in Polished Brass. Your hardware will match the finish selected
Installation
Installation Instructions
How to install this product in a typical situation.
Hardware Tip
Backset: On a lock or latch, it is the distance from the front of the face plate to the center of the knob hub. On the door, it is from the edge of the door to the center of the door knob.
Specs
Product Specifications
Dimensions, specifications and detailed product info
WARNING: California Proposition 65ReviewsProduct Q & A