Status: Open Regular Business Hours Customer Service: Phone and Email
National inclement weather may delay order processing and fulfillment an additional one to two days. Our Customer Service and Hardware Specialists will be available to answer any questions you have, but you may experience increased wait times.
Processing times will return to normal shortly. We thank you for your patience!
Update: 02/10/2021
We at House of Antique Hardware remain open to receive and ship orders. Our Customer Service team is available to answer any questions you may have.
Due to state shelter-in-place regulations, you may experience delays in the shipping of your order.
For items with delayed shipping, an email will be sent notifying you of a delay and the estimated shipping date on the specific products affected.
If a delay notice is received and the estimated ship date is acceptable, there is no action needed.
As we navigate this unprecedented situation, we continue our goal of providing an exceptional customer experience. If you have any questions or concerns, do not hesitate to contact our customer service team.
House of Antique Hardware is following local, state, and federal guidelines to ensure the safety of our employees and customers.
Our hardened steel square-cut flooring nails are used for laying tongue-and-groove hardwood flooring (not recommended for face-nailing softwood flooring as the head is too small). These nails have been heat-treated and tempered for special hardness. Rooted in age-old tradition, our period restoration square-cut flooring nails are cut much the same way they were 150 years ago. The result? Outstanding durability and holding power, designed to last a lifetime. Once you've experienced the quality and performance of our vintage reproductions, they'll surely become your preferred choice for a variety of applications. Made in the USA.
Approximate nails per Lb: 243 for the 1 1/4" (3d) 165 for the 1 1/2" (4d) 104 nails for 2" (6d) 88 for the 2 1/4" (7d) 78 for the 2 1/2" (8d) 53 for the 3" (10d) 35 for the 3 1/2" (16d)
Square or cut nails are very durable and have been used for over 200 years. They are hard to pull out because their shape causes the wood fibers to push downward and wedge against the nails. Learn about hardware >
Product Videos
Reviews
Product Q & A
Adding Items to Cart...
Step 1 Choose Your Function
Passage
Complete non-locking latch set used on most interior doors
Privacy
Complete locking latch set for bedroom and bathroom doors
Double Dummy
Non-latching set with two handles for non-bored closet and double doors
Single Dummy
Non-latching handle for non-bored closet and pantry doors
Step 2 Choose Your Backset
The "backset" is the distance from the edge of your door to the center of the hole bored in your door. Choose from 2⅜" (standard) or 2¾". Measure carefully to ensure proper fit.
or
Choosing a Keying Option for Your Entry Door Set
Single Cylinder Lock:
Key operated from the outside, thumbturn operated from the inside.
Double Cylinder Lock:
Key operated from both inside and outside. Note: Key required for egress.
How to Determine Your Backset
The "backset" is the distance from the edge of your door to the center of the hole bored in your door. Choose from 2⅜" (standard) or 2¾". Measure carefully to ensure proper fit.
or
How to Determine Your Backset
The "backset" is the distance from the edge of your door to the center of the hole bored in your door. Choose from 2½" or 2¾". Measure carefully to ensure proper fit.
or
How to Determine Handing
Stand in the frame of the door with your back to the hinges. If the door swings to your right, it is a RIGHT HAND door. If the door swings to your left, it is a LEFT HAND door.
RIGHT HANDED (RH)
LEFT HANDED (LH)
How to Determine Handing
Stand in the frame of the door with your back to the hinges. If the door swings to your right, it is a RIGHT HAND door. If the door swings to your left, it is a LEFT HAND door.
At House of Antique Hardware