Antique-By-Hand®

Our tailored New York back plate has timeless appeal. Whether your style is Victorian, Craftsman, or Mid-Century modern, this spare, beveled design will fit right in. Designed for use on the interior side of a door, it includes a crescent thumb turn to activate the privacy mortise lock from the inside the room. While the originals were typically made of stamped brass or copper, this heavy-duty reproduction is forged from solid brass. It comes in our exclusive Antique by-Hand finish which ages gracefully over time into a beautiful natural patina.

This authentic reproduction Hoosier-style reversible latch is an excellent choice for new cabinets, or as a replacement for a worn or damaged piece. Made of solid brass, it comes in our exclusive Antique-By-Hand - a finish that ages gracefully over time into a beautiful natural patina. This set comes complete with one flush catch and one 3/8-inch offset catch, which are centered for use with both right and left-handed doors.

Square and simple in design, this versatile transom latch goes with everything, from Victorian to Mid-Century Modern. The circa 1900 design is made of stamped and cast brass. Hand-finished with our living antique patina!

This old-fashioned 2 5/8-Inch Label Holder in Antique-By-Hand features a rolled finger grip. It is designed for very lightweight drawers (the grip is rather slight), like those found in roll-top desks, tool cabinets or crafting stations. Crafted from stamped sheet brass, its hand-applied antique finish continues to age gracefully over time, developing highlights with use.

These premium cabinet hinges with ball tips (2 x 2-inch) are finely crafted from high-strength extruded brass and machined to the closest tolerances. Hand-finished with our living antique patina!

This old-fashioned 3 1/8-Inch Label Holder in Antique-By-Hand features a rolled finger grip. It is designed for very lightweight drawers (the grip is rather slight), like those found in roll-top desks, tool cabinets or crafting stations. Crafted from stamped sheet brass, its hand-applied antique finish continues to age gracefully over time, developing highlights with use.

This brass hexagonal rosette is a wonderful alternative to the round standards. Reproduced from an early 20th century original, it's made of solid, forged brass. Finished with our exclusive living patina.

This authentic reproduction Offset Left-Hand Hoosier Latch (3/8-Inch Offset) is an excellent choice for new cabinets, or as a replacement for a worn or damaged piece. Made of solid brass, it comes in our exclusive Antique-By-Hand - a finish that ages gracefully over time into a beautiful natural patina. This set comes complete with matching slotted screws.

Solid brass bottle opener in Antique-By-Hand finish for ice boxes, kitchens etc

Dating from the high-Victorian era, these 1 1/2 x 2 1/8-inch Gothic-style offset hinges give your cabinets a distinctive flair. Reproduced in solid brass, they're durable enough for kitchen use, yet elegant enough for your dining room decor. Our exclusive Antique by-Hand finish ages gracefully over time into a beautiful natural patina. Reversible for left or right handing.

These classic, Small Solid-Brass Butterfly Offset Cabinet Hinges were popular for decades in the early 20th century. Reproduced in solid brass, they are an authentic period choice for both traditional and modern interiors. Our exclusive Antique by-Hand finish ages gracefully over time into a beautiful natural patina. Reversible for left or right handing.

These premium quality forged-brass switch plates are both elegant and durable. Traditionally styled with crisp beveled edges, this four gang toggle switch cover plate will compliment every style of decor. Our exclusive Antique by-Hand finish ages gracefully over time into a beautiful natural patina.

When you have a pre-bored door, but want to use vintage style knobs, this 3 1/4-inch diameter rosette may be just the thing. Finished with our exclusive living patina.

Early 20th-century Hoosier cabinets typically featured inexpensive, stamped brass knobs such as this. Mounted though the front with a matching 2-inch bolt, it gives any cabinet instant vintage charm. Our exclusive Antique-By-Hand is a living finish that ages gracefully over time into a beautiful natural patina.

Protect the legs of your Federal or Colonial-Revival style furniture with these stunning Large Brass Clawfoot Toe Cap. Authentically reproduced in stamped brass, just like the antique originals, it easily fits over the foot of your table, dresser, or sofa. Our exclusive Antique by-Hand finish ages gracefully over time into a beautiful natural patina. Comes complete with two brass nails for installation.

Pair of solid cast brass 3/8-inch offset hinges complete with single slotted screws and in Antique-By-Hand finish. These hinges measure 1 7/8-inch tall by 3 1/2-inch long.

Our round glass knobs and plain round rosettes create a sparkling ensemble that’s never out of style. These reproduction knobs feature crystal clear glass and a solid-brass shank while the rosettes are beautifully crafted from stamped brass. An oval keyhole cover, two skeleton keys, and a heavy-duty mortise lock complete the set.

The authentic lock has a solid-brass face plate and interior components with an old style cast-iron case, guaranteeing you trouble-free operation and reliable privacy. The set comes in our own Antique-By-Hand—a living antique finish that ages gracefully over time.

With a large round knob and shapely guides, our 6-inch traditional style surface door bolt coordinates with virtually every style of hardware. Finely crafted from solid brass, it features a unique ball-bearing system and three mounting options. Hand-finished with our living antique patina!

This narrow, replacement sash lock catch is designed for modern double hung wood windows with insulated glass. Only 7/16-inch in width, it fits on some Marvin windows (not all), and other brands with a non-beveled catch rail. Solid brass.

Delicate crystal knobs paired with slim and stylish Art Deco plates were all the rage in the 1930s. Cheerful, bright, and beautiful, they are just as appealing today. These top-quality reproductions are made of sparkling crystal glass and the durable, forged-brass base comes in our exclusive Antique-By-Hand, a living finish that ages gracefully over time into a beautiful natural patina.

Protect the legs of your Federal or Colonial-Revival style furniture with these stunning Medium Brass Clawfoot Toe Cap. Authentically reproduced in stamped brass, just like the antique originals, it easily fits over the foot of your table, dresser, or sofa. Our exclusive Antique by-Hand finish ages gracefully over time into a beautiful natural patina. Comes complete with two brass nails for installation.

Solid brass sash stop bead adjusters are a great alternative to using screws or nails to fasten the sash stops, and allow for easy removal and adjustment. These premium grade fasteners secure the stops and allow easy removal for refinishing, repairs, and periodic adjustment of wooden sash windows should they become difficult to operate due to seasonal weather changes. Presented in our exclusive Antique-by-Hand finish, they age gracefully over time into a beautiful natural patina.

This cast brass stay for sash windows measures 2 5/8 by 1 1/8-inch including the handle. The hand applied patina will age gracefully over time.

Arts and Crafts era reproduction of a keyhole finger pull for cabinets or furniture. Made of solid cast brass and finished with our exclusive living patina. Measures 1 1/2-inch T x 1 7/8-inch W x 5/8-inch P.