Our standard push-button dimmer switch adjusts the light level of one or more fixtures from a single location. One button operates the fixture, while the other adjusts the light level. Patterned after early 20th century designs, it's the perfect companion to our own standard push-button switches. All of our dimmers are built to modern safety standards (UL and CUL listed), and suitable for restoration or new construction alike.

This dimmer can be installed with the dimmer button in the top or bottom position. The 600-watt dimmer is suitable for larger fixtures or chandeliers with high wattage bulbs.(NOT INTENDED FOR USE WITH LED OR CFL BULBS, FANS OR LOW VOLTAGE).

A House of Antique Hardware exclusive! Our premium push-button dimmer switch offers modern dimmer technology in an authentic, vintage-style package. Simply push the smooth button to switch on/off, and rotate the fluted button to increase or decrease the light level. Each button features a genuine mother-of-pearl inlay, an iridescent shell that shimmers as it reflects light, adding a touch of subtle elegance. It's the perfect companion to our own premium push-button switches. Built to modern safety standards (UL & CUL listed), it's the dimmer of choice for any period restoration.

This dimmer can be installed with the dimmer button in the top or bottom position. The 600-watt dimmer is suitable for larger fixtures or chandeliers with high wattage bulbs.(NOT INTENDED FOR USE WITH LED OR CFL BULBS, FANS OR LOW VOLTAGE).

A House of Antique Hardware exclusive! Our Premium 3-Way White Push Button Light Switch is the most authentic you'll find anywhere. Faithfully reproduced from antique originals, it features larger, white buttons and genuine mother-of-pearl inlay. This iridescent shell shimmers as it reflects light, adding a touch of subtle elegance. The internal components have been painstakingly engineered for smooth operation, while retaining the classic snap sound and action. Built to modern safety standards (UL & CUL listed), it is the switch of choice for any period restoration.

A House of Antique Hardware exclusive! Our Premium White Push-Button Light Switch is the most authentic you'll find anywhere. Faithfully reproduced from antique originals, it features larger, white buttons and genuine mother-of-pearl inlay. This iridescent shell shimmers as it reflects light, adding a touch of subtle elegance. The internal components have been painstakingly engineered for smooth operation, while retaining the classic snap sound and action. Built to modern safety standards (UL & CUL listed), it is the switch of choice for any period restoration.

With a central circle detail supported by a broad curve, this bracket is an all-around choice for your shelves, fitting with any style. Made from a heavy cast iron with a matte black finish.

Our standard 3-way push-button dimmer switch adjusts the light level of one or more fixtures operated from two locations. One button operates the fixture, while the other adjusts the light level. Patterned after early 20th century designs, it's the perfect companion to our own standard push-button switches. All of our dimmers are built to modern safety standards (UL and CUL listed), and suitable for restoration or new construction alike.

This dimmer can be installed with the dimmer button in the top or bottom position. The 600-watt dimmer is suitable for larger fixtures or chandeliers with high wattage bulbs. (NOT INTENDED FOR USE WITH LED OR CFL BULBS, FANS OR LOW VOLTAGE).

A House of Antique Hardware exclusive! Our Premium 4-Way White Push Button Light Switch is the most authentic you'll find anywhere. Faithfully reproduced from antique originals, it features larger, white buttons and genuine mother-of-pearl inlay. This iridescent shell shimmers as it reflects light, adding a touch of subtle elegance. The internal components have been painstakingly engineered for smooth operation, while retaining the classic snap sound and action. Built to modern safety standards (UL & CUL listed), it is the switch of choice for any period restoration.

Rugged meets refined in these classic scroll design shutter dogs. With their elegant profile and hammered texture they beautifully compliment any style of home. Made of heavy duty cast iron, galvanized and finished with a rust resistant black powder coat. Designed for masonry applications.

Ornate cast iron hinges add a delightful Victorian touch to any screen door. This handsome reproduction features charming acorn finials, a fanciful leaf pattern, and a Matte Black finish. The strong, enclosed spring closes your door with a resounding bang!

Keep your front entry free of debris with a this cast iron boot scraper. The rustic design hearkens back to pre-pavement times, when scraping one's boots before entering a home or establishment was considered good manners. The finish is a matte black powder coat.

This distinctive Victorian style bracket in matte black is a House of Antique Hardware exclusive! Reproduced from an 1880s Gothic Revival design, it has a wonderful architectural quality, recalling the bracketed wood ceilings of medieval churches. Made of heavy duty cast iron to provide sturdy support for shelves throughout your home.

Our French-country dummy strap with a rustic, textured surface and stylized floral motif is the perfect decorative accent to shutters, doors, gates and garages. Pre-finished with a black powder-coat.

Our 4-way push button light switch is installed between two 3-way switches when a fixture is operated from three locations. Based on early twentieth century models, it features white mother-of-pearl buttons and makes a resounding click when pressed. All of our switches are built to modern safety standards (UL and CUL listed), and suitable for restoration or new construction alike.

These traditional Colonial style 3/4-inch offset hinges with plate pintles are still popular today! The 10 inch straps are forged out of steel and the pintles are made of solid cast iron, both galvanized. These versatile hinges can be mounted to show either when the shutters are open or closed. The rough textured black powder coating provides a great period look and helps reduce rust.

Our Premium 300W Single-Pole White Push Button Dimmer Switch offers modern dimmer technology in an authentic, vintage-style package. A House of Antique Hardware exclusive! Simply push the smooth button to switch on/off, and rotate the fluted button to increase or decrease the light level. Each button features a true mother-of-pearl inlay, an iridescent shell that shimmers as it reflects light for a touch of elegance. It is the perfect companion to our own premium push button switches. Built to modern safety standards (UL & CUL listed), it is the dimmer of choice for any period restoration.

This highly decorative 3-Inch Steeple-Tip Hinge is a Victorian-era classic. With its graceful tendrils, patterned barrel and elegant finials, it is a delightful addition to your home. Made of heavy-duty cast iron, this faithful reproduction has loose pins and slotted and Phillips screws. Matte black pwder coating.

An easy-grip ball handle adds an authentic look to this 12-inch cast iron surface bolt. Ideal for colonial or other rustic home styles, it has a textured surface and durable black powder-coat finish. Three strike plate options allow it to be used on a variety of applications from shutters, gates, doors and cabinets.

This beautifully detailed sash lock is the crowning touch to your window restoration. Reproduced from an 1880s original, it features a lovely flower & scroll design, set off by a crisp, banded border. Finely crafted from strong and attractive cast iron, with a matte black powdercoat.

This heavy-duty casement adjuster is constructed from solid, cast iron. The handle is approximately 3/16-inch thick - well suited to large or heavy windows. It includes two sill mounted keepers and holes for five opening positions. Offered in a durable matte black finish, it's a great choice for colonial, Tudor, Spanish or rustic country houses!

This vintage double hook is an authentic reproduction of a Victorian-era classic—cast in iron, powder coated, and adorned with an iconic acorn at each end. Versatile and durable, it goes well in an entryway, a child’s room, or on the inside of a cupboard. Whether displayed alone or grouped together in a row, it’s built to last.

Sturdy and versatile, our 4-Inch Lag Bolt Pintles are designed for masonry or wood applications. They have a variable offset and a 7/16-inch diameter. Made of heavy-duty galvanized steel, they feature a rust-resistant powder-coated finish.

This decorative Bird Plant Hanger features an elegant, nature-inspired design and durable matte black finish. Cast in heavy-duty iron, it is sturdy enough to hold large plants---indoors or out.

This tiny, yet highly decorative bracket is perfect for holding small shelves in your kitchen or bath. The unique lattice design is reproduced in cast iron from a Victorian original. Finished with a matte-black powder coat to prevent rust.

Upgrade your Victorian home with this Pennsylvania Dutch star design shelf bracket. Made of heavy duty cast iron with a black powder coat finish. Medium sized for use anywhere!