Menu

Contact
x
Call Now

Toll Free: (888) 223-2545

Customer Service
Press 3

Hardware Specialist
Press 2

Hours:
9:00 am - 8:30 pm
M-F Eastern Time

Results 1-30 of 14212345
Sort by NameSort by Price

New Door Hardware

Zinc plated Steel Nut for Spindles 3/8-Inch 20-TPI (item #R-01BM-8662)

Zinc plated Steel Nut for Spindles 3/8-Inch 20-TPI

Hexagonal screw for optional use with doorknob spindles. Intended for use with split spindles in doors that have a knob from only one side. By tightening the nut against the door lock’s hub, it helps set the spindle in the lock. Made of steel and zinc plated.
[more...]

Steel Half Spindle 7mm 20-TPI (item #R-01BM-8773-20)

Steel Half Spindle 7mm 20-TPI

7mm Half spindle for doorknobs. Steel. Zinc plated. For mortise locks or rim locks where only one doorknob is used. Secured with a screw at one end.
[more...]

Steel Half Spindle 8 mm 20-TPI (item #R-01BM-8772-20)

Steel Half Spindle 8 mm 20-TPI

8mm Half spindle for doorknobs. Steel. Zinc plated. For mortise locks or rim locks where only one doorknob is used. Secured with a screw at one end.
[more...]

4-Inch Steel Threaded Spindle 8 mm - 20 TPI (item #R-01BM-8777-20)

4-Inch Steel Threaded Spindle 8 mm - 20 TPI

This sturdy 4-inch spindle is designed to facilitate new or vintage doorknobs with threaded shanks of 20 TPI. Constructed of hardened steel, it provides smooth operation and long-lasting wear. Ideal for standard doors.
[more...]

4 Pack Brass 10-24 x 3/8-Inch Set Screws for Tapped Spindles (item #R-01BM-8775)

4 Pack Brass 10-24 x 3/8-Inch Set Screws for Tapped Spindles

These standard 10-24 x 3/8-inch set screws are used with vintage style knobs mounted on straight, tapped spindles. The screw slides through the knob and turns directly into the threaded hole on the spindle (not to be confused with headless set screws used for tightening knobs onto threaded spindles). The set contains enough screws to mount four knobs onto spindles.
[more...]

Solid Brass Full Lip Strike Plate with Square Corners (item #R-01HH-FL-STRX)

Solid Brass Full Lip Strike Plate with Square Corners

Made of solid brass, our full lip strike plate with square corners is offered in a wide range of common and hard-to-find finishes to match old and new door hardware. Designed for standard residential doors with tubular latches, this premium strike is the perfect replacement for missing or damaged plates.
[more...]

8 Finishes 8 Finishes

3 1/2-Inch Steel Threaded Spindle 8 mm - 20 TPI (item #R-01BM-8844-20)

3 1/2-Inch Steel Threaded Spindle 8 mm - 20 TPI

This sturdy spindle is designed to facilitate new or vintage doorknobs with threaded shanks of 20 TPI. Constructed of hardened steel, it provides smooth operation and long-lasting wear. With a 3 1/2" length, it's ideal for standard doors.
[more...]

Solid Brass T-Strike Plate - 2 3/4 x 1 1/8 Inch (item #R-01HH-T-STRX)

Solid Brass T-Strike Plate - 2 3/4 x 1 1/8 Inch

Made of solid brass, our premium "T" strike plate is available in many common and hard-to-find finishes to match your door hardware. Designed for interior and exterior residential doors with tubular latches, this standard t-strike is the perfect replacement for missing or damaged plates.
[more...]

8 Finishes 8 Finishes

2 1/2-Inch Steel Sectional Spindle 7 mm - 20 TPI (item #R-01BM-8845-20-N)

2 1/2-Inch Steel Sectional Spindle 7 mm - 20 TPI

Split spindles for doorknobs. Steel. Zinc plated. To be used with threaded doorknobs. Used with locks when a doorknob is needed on one side only.
[more...]

4 1/2-Inch Steel Straight Spindle 7mm - Tapped 10-24 (item #R-01BM-8774)

4 1/2-Inch Steel Straight Spindle 7mm - Tapped 10-24

Plain straight spindle for doorknobs with a square hole. Steel. Zinc plated. Holes drilled and tapped at 5 positions for set screws. Comes with two 10-24 X 3/8-inch brass set-screws.
[more...]

15/16-Inch Steel Dummy Spindle 7 mm 20-TPI (item #R-01BM-8849-20)

15/16-Inch Steel Dummy Spindle 7 mm 20-TPI

This sturdy 15/16-Inch Steel Dummy Spindle is designed to facilitate fixed doorknobs with threaded shanks of 20 TPI that don't operate a latch. Typically used on closet, pantry, or French doors, it's constructed of solid steel, and features a 7 mm thickness.
[more...]

1 1/2-Inch Steel Dummy Spindle 7 mm 20-TPI (item #R-01BM-8849-20-L)

1 1/2-Inch Steel Dummy Spindle 7 mm 20-TPI

This sturdy 1 1/2-Inch Steel Dummy Spindle is designed to facilitate fixed doorknobs with threaded shanks of 20 TPI that don't operate a latch. Typically used on closet, pantry, or French doors, it's constructed of solid steel, and features a 7 mm thickness.
[more...]

4-Inch Steel Threaded Swivel Spindle 8 mm - 20 TPI (item #R-01BM-8778-20)

4-Inch Steel Threaded Swivel Spindle 8 mm - 20 TPI

Our 4-Inch x 8mm Threaded Doorknob Swivel Spindle facilitates new or vintage doorknobs with threaded shanks of 20 TPI. Used with privacy latches and mortise locks, its zinc-plated steel construction provides smooth operation and long-lasting wear.
[more...]

3 1/2-Inch Steel Threaded Swivel Spindle 8 mm - 20 TPI (item #R-01BM-8843-20)

3 1/2-Inch Steel Threaded Swivel Spindle 8 mm - 20 TPI

Our 3 1/2-Inch x 8mm threaded doorknob swivel spindle facilitates new or vintage doorknobs with threaded shanks of 20 TPI. Used with privacy latches and mortise locks, its zinc-plated steel construction provides smooth operation and long-lasting wear.
[more...]

2 1/2-Inch Steel Sectional Spindle 7 mm - 20 TPI - Tapped 10-24 (item #R-01BM-8845-20)

2 1/2-Inch Steel Sectional Spindle 7 mm - 20 TPI - Tapped 10-24

Split spindles for doorknobs. Steel. Zinc plated. Have 3 threaded holes tapped 10-24, and can be used with threaded doorknobs or with old doorknobs with square holes. Used with locks when a doorknob is needed on one side only.
[more...]

3 1/2-Inch Steel Swivel Spindle 7 mm 16-TPI (item #R-01BM-8846-16)

3 1/2-Inch Steel Swivel Spindle 7 mm 16-TPI

Our 3 1/2-Inch x 7 mm threaded doorknob swivel spindle facilitates new or vintage doorknobs with threaded shanks of 16 TPI. Used with privacy latches and mortise locks, its zinc-plated steel construction provides smooth operation and long-lasting wear.
[more...]

2 1/2-Inch Steel Sectional Spindle 7 mm - 16 TPI - Tapped 10-24 (item #R-01BM-8845-16)

2 1/2-Inch Steel Sectional Spindle 7 mm - 16 TPI - Tapped 10-24

Split spindles for doorknobs. Steel. Zinc plated. Have 3 threaded holes tapped 10-24, and can be used with threaded doorknobs or with old doorknobs with square holes. Used with locks when a doorknob is needed on one side only. These have the coarser 16 TPI.
[more...]

3 7/8-Inch Solid Brass Mortise Lock Strike Plate (item #R-01BM-8887X)

3 7/8-Inch Solid Brass Mortise Lock Strike Plate

This smaller-sized 3 7/8-inch strike plate will replace a missing or worn-out strike plate for many antique mortise locks on interior doors. Made of durable solid brass in heavy duty thickness, this replacement plate will last for many years.
[more...]

5 Finishes 5 Finishes

Brass Hinge Pin Door Stop (item #RS-06DH-HPH89X)

Brass Hinge Pin Door Stop

Hinge pin stops protect walls from swinging doors by limiting a door’s range of motion. This handy hardware is helpful if you lack space for a door stop. This one installs into a door’s hinge assembly and is well suited to lightweight residential doors.
[more...]

9 Finishes 9 Finishes

Solid Brass Adjustable Hinge Pin Door Stop (item #RS-06DH-HPA69X)

Solid Brass Adjustable Hinge Pin Door Stop

Hinge pin stops protect walls from swinging doors by limiting a door’s range of motion – which this model lets you adjust. This handy hardware is helpful if you lack space for a door stop. Solid brass, available in multiple finishes.
[more...]

10 Finishes
10 Finishes

Steel Alignment Tool (item #R-01BM-8779)

Steel Alignment Tool

Alignment tool for door trim. Made of zinc-plated steel. Consisting of 2 threaded cones and a 7 mm spindle, this simple but effective tool is used to align plates and roses with the latch or lock, and to mark the location of their screws for accurate installation. Works with any door thickness.
[more...]

200 Degrees Wide Angle Door Viewer (item #RS-06DH-55211X)

200 Degrees Wide Angle Door Viewer

Install this high-quality door viewer and feel safe and secure when somebody knocks. Clear glass combined with a wide-range view means you see more and see better. Multiple finishes make it easy to match your door and door hardware.
[more...]

9 Finishes 9 Finishes

4 3/8-Inch Solid Brass Mortise Lock Strike Plate (item #R-01BM-8881X)

4 3/8-Inch Solid Brass Mortise Lock Strike Plate

This medium-sized 4 3/8-inch strike plate will replace a missing or worn-out strike plate for many antique mortise locks on interior doors. Made of durable solid brass in heavy duty thickness, this replacement plate will last for many years.
[more...]

5 Finishes 5 Finishes

Square Corner Roller Catch (item #RS-01DH-RCA336X)

Square Corner Roller Catch

Our Square Corner Roller Catch works with a variety of interior doors including dummy doors. Made from solid brass, it features a spring-loaded roller that closes doors firmly and holds them in place. Adjusts to fit varying door gaps.
[more...]

10 Finishes
10 Finishes

Solid Brass Full Lip Strike Plate with Square Corners in Antique-By-Hand (item #R-01HH-FL-STR-ABH)

Solid Brass Full Lip Strike Plate with Square Corners in Antique-By-Hand

Our premium full lip strike plate with square corners is designed for standard residential doors with tubular latches. Made of solid brass with our proprietary Antique-by-Hand finish, this strike will age gracefully over time, enhancing its beauty. It's the perfect replacement for a missing or damaged plate, whether your hardware is old or new.
[more...]

Solid Brass T-Strike Plate - 2 3/4 x 1 1/8 Inch in Antique-By-Hand (item #R-01HH-T-STR-ABH)

Solid Brass T-Strike Plate - 2 3/4 x 1 1/8 Inch in Antique-By-Hand

Our premium t-strike plate is designed for interior and exterior residential doors with tubular latches. Made of solid brass with our proprietary Antique-by-Hand finish, this standard strike will age gracefully over time, enhancing its beauty. It's the perfect replacement for a missing or damaged plate, whether your hardware is old or new.
[more...]

Cast Brass

Cast Brass "Toilet" Sign

Our vintage-style Toilet door sign brings an authentic look wherever it resides. Cast in solid brass for durability, it features distinctive cut corners, a textured background, and classic font. Its smaller size works well on most doors, whether in an office building, restaurant, or home.
[more...]

2 Finishes 2 Finishes

Vertical Cast Brass

Vertical Cast Brass "Push" Sign

Our vintage-style Push vertical door sign brings an authentic look wherever it resides. Cast in solid brass for durability, it features distinctive cut corners, a textured background, and classic font. Its smaller size works well on most doors, whether in an office building, restaurant, or home.
[more...]

2 Finishes 2 Finishes

Cast Brass

Cast Brass "Bathroom" Sign

Our vintage-style Bathroom door sign brings an authentic look wherever it resides. Cast in solid brass for durability, it features distinctive cut corners, a textured background, and classic font. Its smaller size works well on most doors, whether in an office building, restaurant, or home.
[more...]

2 Finishes 2 Finishes

Vertical Cast Brass

Vertical Cast Brass "Pull" Sign

Our vintage-style Pull vertical door sign brings an authentic look wherever it resides. Cast in solid brass for durability, it features distinctive cut corners, a textured background, and classic font. Its smaller size works well on most doors, whether in an office building, restaurant, or home.
[more...]

2 Finishes 2 Finishes



Results 1-30 of 14212345
Sort by NameSort by Price