As we navigate this unprecedented situation, we continue our goal of providing an exceptional customer experience. If you have any questions or concerns, do not hesitate to contact our customer service team.
House of Antique Hardware is following local, state, and federal guidelines to ensure the safety of our employees and customers.
Update: 06/22/2020
We want to thank those that helped House of Antique Hardware donate 255,445 meals as part of our community promotion. This donation allowed the Oregon Food Bank to provide thousands of families, in need, with meals.
With its grid of square holes and corner "window pane" cutouts this Mission design floor grate goes well in bungalow and craftsman style homes. Available in six standard sizes and finishes so you can add vintage charm to all the rooms of your house. Constructed of durable and economical plated or enameled steel.
The louver is a steel housing with pivoting fins, which increases or decreases air flow through the floor register. The louver is controlled by lever adjustment and can be easily removed if no air flow control is needed.
Boot Size refers to the cut-out in the floor that the register fits into. Register Size refers to the outside measurement of the register face plate. To ensure a proper fit, always order registers based on the boot size.
Dimensions:
Boot size: 4" x 10" Register size: 5.75" x 11.5"
Boot size: 4" x 12" Register size: 5.75" x 13.875"
Boot size: 4" x 14" Register size: 5.75" x 15.875"
Boot size: 6" x 10" Register size: 7.625" x 11.75"
Boot size: 6" x 12" Register size: 7.625" x 13.875"
Boot size: 6" x 14" Register size: 7.5" x 15.875"
Floor grate patterns will vary depending on the size ordered. If you unsure about the size needed please call us for help. Learn about hardware >
Product Videos
Reviews
Product Q & A
Adding Items to Cart...
Step 1 Choose Your Function
Passage
Complete non-locking latch set used on most interior doors
Privacy
Complete locking latch set for bedroom and bathroom doors
Double Dummy
Non-latching set with two handles for non-bored closet and double doors
Single Dummy
Non-latching handle for non-bored closet and pantry doors
Step 2 Choose Your Backset
The "backset" is the distance from the edge of your door to the center of the hole bored in your door. Choose from 2⅜" (standard) or 2¾". Measure carefully to ensure proper fit.
or
Choosing a Keying Option for Your Entry Door Set
Single Cylinder Lock:
Key operated from the outside, thumbturn operated from the inside.
Double Cylinder Lock:
Key operated from both inside and outside. Note: Key required for egress.
How to Determine Your Backset
The "backset" is the distance from the edge of your door to the center of the hole bored in your door. Choose from 2⅜" (standard) or 2¾". Measure carefully to ensure proper fit.
or
How to Determine Your Backset
The "backset" is the distance from the edge of your door to the center of the hole bored in your door. Choose from 2½" or 2¾". Measure carefully to ensure proper fit.
or
How to Determine Handing
Stand in the frame of the door with your back to the hinges. If the door swings to your right, it is a RIGHT HAND door. If the door swings to your left, it is a LEFT HAND door.
RIGHT HANDED (RH)
LEFT HANDED (LH)
How to Determine Handing
Stand in the frame of the door with your back to the hinges. If the door swings to your right, it is a RIGHT HAND door. If the door swings to your left, it is a LEFT HAND door.