Keyed Pocket Door Mortise Lock Set With Rectangular Pulls

Your Selection:

Select Your Finish:

 
$286.90
Quantity discounts available
QuantityPrice
Item #: RS-06EM-2103X

Description

This premium quality pocket door lock set features a keyed cylinder lock, thumb-turn emergency release and an integrated edge pull. The substantial surfaced pulls and lock face are made of solid, wrought brass in your choice of classic finishes. With its slim lock case and nearly flush surface pulls, it's a great choice for thin pocket doors with a tight frame clearance. For a complete double pocket door set, combine this locking set with the matching dummy set.

The lock is activated from outside by a standard key and from inside by the thumb-turn. When locked, the latch bolt is held in place by the included strike or dummy mortise case (for double doors - purchase separately). To release the integrated edge pull, simply push the button located above the pull.

Dimensions. Surface Trim: 7 1/2" H x 2 1/2" W x 1/16" T. The recessed portion of the pulls must be mortised 1/4" into the door. Lock backset: 2 3/16". Faceplate: 8" H x 7/8" W X 1/16" Thick. Strike plate: 3 1/2" H x 3/4"W. Lock case: 6 1/4" H x 3 .48" W.
Standard door range: 1 3/8" - 1 3/4" thick.

Installation

Installation Instructions

How to install this product in a typical situation.

Hardware Tip

The thickness of your pocket door must be greater than the sum of the mortise depth measurements for two pulls plus the thickness of the lock case.

Specs

Product Specifications

Dimensions, specifications and detailed product info

WARNING: California Proposition 65
ReviewsProduct Q & A