As we navigate this unprecedented situation, we continue our goal of providing an exceptional customer experience. If you have any questions or concerns, do not hesitate to contact our customer service team.
House of Antique Hardware is following local, state, and federal guidelines to ensure the safety of our employees and customers.
Update: 06/22/2020
We want to thank those that helped House of Antique Hardware donate 255,445 meals as part of our community promotion. This donation allowed the Oregon Food Bank to provide thousands of families, in need, with meals.
Transformers convert your 120-volt house-hold current to 12-volt. Our Standard 75 Watt Stainless-Steel version is a great choice for smaller projects. It features 12v and 15v multi-tap outputs for added options when you need when you need more voltage. Can be installed on the side of your house and plugged into an exterior outlet, and must be mounted at least 12" above the ground.
Dimensions: 13 1/5" H x 6 1/2" W. 12 and 15V outputs. 75W. CUL wet.
To figure out the correct wattage transformer for your 12V landscape system, add up the total wattage of the fixtures (or VA for LED lights), and add around 20% more for future fixture additions. Learn about hardware >
Product Videos
Reviews
Product Q & A
Adding Items to Cart...
Step 1 Choose Your Function
Passage
Complete non-locking latch set used on most interior doors
Privacy
Complete locking latch set for bedroom and bathroom doors
Double Dummy
Non-latching set with two handles for non-bored closet and double doors
Single Dummy
Non-latching handle for non-bored closet and pantry doors
Step 2 Choose Your Backset
The "backset" is the distance from the edge of your door to the center of the hole bored in your door. Choose from 2⅜" (standard) or 2¾". Measure carefully to ensure proper fit.
or
Choosing a Keying Option for Your Entry Door Set
Single Cylinder Lock:
Key operated from the outside, thumbturn operated from the inside.
Double Cylinder Lock:
Key operated from both inside and outside. Note: Key required for egress.
How to Determine Your Backset
The "backset" is the distance from the edge of your door to the center of the hole bored in your door. Choose from 2⅜" (standard) or 2¾". Measure carefully to ensure proper fit.
or
How to Determine Your Backset
The "backset" is the distance from the edge of your door to the center of the hole bored in your door. Choose from 2½" or 2¾". Measure carefully to ensure proper fit.
or
How to Determine Handing
Stand in the frame of the door with your back to the hinges. If the door swings to your right, it is a RIGHT HAND door. If the door swings to your left, it is a LEFT HAND door.
RIGHT HANDED (RH)
LEFT HANDED (LH)
How to Determine Handing
Stand in the frame of the door with your back to the hinges. If the door swings to your right, it is a RIGHT HAND door. If the door swings to your left, it is a LEFT HAND door.
At House of Antique Hardware