Menu

Contact
x
Call Now

Toll Free: (888) 223-2545

Customer Service
Press 3

Hardware Specialist
Press 2

Hours:
9:00 am - 8:30 pm
M-F Eastern Time

Results 1-30 of 6012
Sort by NameSort by Price

Shutter Hinges

Enhance the look of your home's exterior shutters with decorative shutter hinges from House of Antique Hardware. Our galvanized iron and stainless steel shutter hinge selection ensures that your shutters will look good while withstanding the elements year-round.

Decorative Shutter Hinges

Set of

Set of "Clarks Tip" Cast Iron Shutter Hinges With 1 1/4" Throw

These charming, acorn tip hinges were commonly found on Victorians and early 20th century colonials. The hinges are surface mounted and lift off, making it easy to install or remove your shutters. The 1 1/4-inch throw is intended for flush applications.
[more...]

"Acme" Cast Iron Mortise Shutter Hinges - 3 1/8" x 2 1/2"

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (3 1/8-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.
[more...]

"Acme" Cast Iron Mortise Shutter Hinges - 3 3/4" x 2 1/2"

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (3 3/4-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.
[more...]

"Acme" Cast Iron Mortise Shutter Hinges - 4 1/2" x 2 7/8"

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (4 1/2-Inch x 2 7/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.
[more...]

"Acme" Cast Iron Mortise Shutter Hinges - 5" x 3"

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (5-Inch x 3-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.
[more...]

Pair of 3/4-Inch Offset Galvanized Iron Shutter Strap Hinges With Plate Pintles (item #R-09DE-140X)

Pair of 3/4-Inch Offset Galvanized Iron Shutter Strap Hinges With Plate Pintles

These traditional Colonial style 3/4-inch offset hinges with plate pintles are still popular today! The straps are forged out of steel and the pintles are made of solid cast iron, both galvanized. These versatile hinges can be mounted to show either when the shutters are open or closed. The rough textured black powder coating provides a great period look and helps reduce rust.
[more...]

Pair of 1 1/2-Inch Offset Galvanized Iron Shutter Strap Hinges With Plate Pintles (item #R-09DE-142X)

Pair of 1 1/2-Inch Offset Galvanized Iron Shutter Strap Hinges With Plate Pintles

These traditional Colonial style 1 1/2-inch offset hinges with plate pintle are still popular today! The straps are forged out of steel and the pintles are made of solid cast iron, both galvanized. These versatile hinges can be mounted to show either when the shutters are open or closed. The rough textured black powder coating provides a great period look and helps reduce rust.
[more...]

Pair of 9 1/4

Pair of 9 1/4" Suffolk-Style Shutter Strap Hinges - 1" Offset

The Colonial look of our 9 1/4-Inch Suffolk-Style Shutter Strap Hinges (1-inch offset) is still popular today! The straps are forged out of steel and the pintles are made of solid, cast iron, both galvanized. They feature a textured surface and rust-resistant, powder-coated finish.
[more...]

Pair of 9 1/4

Pair of 9 1/4" Heart-Tip Shutter Strap Hinges - No Offset and Pintle 1" Offset

The Colonial look of our 9 1/4-Inch Heart-Tip Shutter Strap Hinges (no offset) is still popular today! The straps are forged out of steel and the pintles are made of solid, cast iron, both galvanized. They feature a textured surface and rust-resistant, powder-coated finish.
[more...]

Pair of 9 1/4

Pair of 9 1/4" Heart-Tip Shutter Strap Hinges - 1" Offset

The Colonial look of our 9 1/4-Inch Heart-Tip Shutter Strap Hinges (1-inch offset) is still popular today! The straps are forged out of steel and the pintles are made of solid, cast iron. They feature a textured surface and rust-resistant, powder-coated finish.
[more...]

Pair of 9 1/4

Pair of 9 1/4" Suffolk-Style Shutter Strap Hinges - No Offset and Pintle 1" Offset

The Colonial look of our 9 1/4-Inch Suffolk-Style Shutter Strap Hinges (no offset) is still popular today! The straps are forged out of steel and the pintles are made of solid, cast iron. They feature a textured surface and rust-resistant, powder-coated finish.
[more...]

Set of

Set of "Clarks Tip" Cast Iron Shutter Hinges With 3 1/4" Throw

These charming, acorn tip hinges were commonly found on Victorians and early 20th century colonials. The hinges are surface mounted and lift off, making it easy to install or remove your shutters. The 3 1/4-inch throw is optimal for brick veneered homes.
[more...]

"Acme" Cast Iron Mortise Shutter Hinges - 5 1/2" x 3 1/8"

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (5 1/2-Inch x 3 1/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.
[more...]

Set of 4 1/8-Inch Connecticut Shutter Hinges - No Offset (item #R-09JW-088534)

Set of 4 1/8-Inch Connecticut Shutter Hinges - No Offset

Our set of 4 1/8-inch Connecticut shutter hinges offer traditional Colonial style. Constructed from cast iron, they feature a textured surface and rust-resistant, durable black powder-coated finish. Sold as a complete set for two shutters. Can be mounted on wood or masonry with the included lag bolt (masonry lag shield anchors not included).
[more...]

Pair of Vertical or Middle Strap Shutter Hinges With 1 1/2

Pair of Vertical or Middle Strap Shutter Hinges With 1 1/2" Offset

These vertical shutter straps are not only distinctive in appearance - they're ideal for shutters too narrow for horizontal straps. They can also be used with New York style hinge sets on tall shutters as a middle support hinge. These very sturdy hinges lift off for easy maintenance and have a 1 1/2-inch offset (3-inch throw). Made from 3/16-inch thick cast iron, they are powder coated to resist rust. Reversible.
[more...]

Pair of 6

Pair of 6" Mini Strap Hinges - Lag Mount

Our Pair of 6 1/4-Inch Mini Strap Hinges offer traditional Colonial style. Constructed from cast iron, they feature a textured surface and rust-resistant, durable black powder-coated finish.
[more...]

Pair of 12

Pair of 12" Suffolk-Style Shutter Strap Hinges - 1 1/2" Offset

The Colonial look of our 12-Inch Suffolk-Style Shutter Strap Hinges (1 1/2-inch offset) is still popular today! The straps are forged out of steel and the pintles are made of solid, cast iron. These versatile designs can be mounted to show, whether the shutters are open or closed. They feature a textured surface and rust-resistant, powder-coated finish.
[more...]

Set of

Set of "Clarks Tip" Black Cast-Iron Shutter Hinges with 1 1/4" Throw

This charming Set of Clarks Tip Black Cast-Iron Shutter Hinges (1 1/4-inch throw), were commonly found on Victorians and early 20th century Colonials. Intended for flush applications, they are surface mounted and lift off, making it easy to install or remove your shutters. Features a rust resistant, powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two fasteners - enough to complete one window.
[more...]

Pair of 3/4-Inch Offset Galvanized Iron Shutter Strap Hinges With Lag Pintles (item #R-09DE-139X)

Pair of 3/4-Inch Offset Galvanized Iron Shutter Strap Hinges With Lag Pintles

These traditional Colonial style 3/4-inch offset hinges with lag pintles are still popular today! The straps are forged out of steel and the pintles are made of solid cast iron, both galvanized. These versatile hinges can be mounted to show either when the shutters are open or closed. The rough textured black powder coating provides a great period look and helps reduce rust.
[more...]

Pair of 1 1/2-Inch Offset Galvanized Iron Shutter Strap Hinges With Lag Pintles (item #R-09DE-141X)

Pair of 1 1/2-Inch Offset Galvanized Iron Shutter Strap Hinges With Lag Pintles

These traditional Colonial style 1 1/2-inch offset hinges with lag pintle are still popular today! The straps are forged out of steel and the pintles are made of solid cast iron, both galvanized. These versatile hinges can be mounted to show either when the shutters are open or closed. The rough textured black powder coating provides a great period look and helps reduce rust.
[more...]

Pair of Shutter Strap Hinges with Plate Pintles - 2 1/4

Pair of Shutter Strap Hinges with Plate Pintles - 2 1/4" Offset

Still popular today, these traditional Colonial-style Shutter Strap Hinges with Plate Pintles (2 1/4-Inch Offset) can be mounted to be visible whether your shutters are open or closed. Forged from galvanized steel with cast iron pintles, they feature a rough textured, black-powder coating for a perfect period look that helps to reduce rust. Made to last a lifetime, the reversible, lift-off design makes for easy installation and maintenance.
[more...]

"Acme" Black Cast-Iron Mortise Shutter Hinges - 3 1/8" x 2 1/2"

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (3 1/8-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.
[more...]

"Acme" Black Cast-Iron Mortise Shutter Hinges - 3 3/4" x 2 1/2"

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (3 3/4-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.
[more...]

Pair of Shutter-Strap Hinges with Plate Pintles - 3 1/4

Pair of Shutter-Strap Hinges with Plate Pintles - 3 1/4" Offset

Still popular today, these traditional Colonial-style Shutter Strap Hinges with Plate Pintles (3 1/4-Inch Offset) can be mounted to be visible whether your shutters are open or closed. Forged from galvanized steel with cast iron pintles, they feature a rough textured, black-powder coating for a perfect period look that helps to reduce rust. Made to last a lifetime, the reversible, lift-off design makes for easy installation and maintenance.
[more...]

"Acme" Black Cast-Iron Mortise Shutter Hinges - 4 1/2" x 2 7/8"

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (4 1/2-Inch x 2 7/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.
[more...]

"Acme" Black Cast-Iron Mortise Shutter Hinges - 5" x 3"

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (5-Inch x 3-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.
[more...]

Pair of Suffolk Style Galvanized-Steel

Pair of Suffolk Style Galvanized-Steel "L" Hinges with Plate Pintles - 3/4" Offset

Our Pair of 3/4-inch Offset Suffolk-Style L Hinges with Plate Pintles offer traditional Colonial style. Constructed from galvanized steel, they feature a rust-resistant and durable black powder-coated finish. They can be mounted to show either when the shutters are open or closed.
[more...]

"Acme" Cast Iron Mortise Shutter Hinges - 6 1/2" x 3 1/2"

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (6 1/2-Inch x 3 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.
[more...]

Pair of Suffolk Style Galvanized-Steel

Pair of Suffolk Style Galvanized-Steel "L" Hinges with Plate Pintles - 1 3/4" Offset

Our Pair of 1 3/4-inch Offset Suffolk-Style L Hinges with Plate Pintles offer traditional Colonial style. Constructed from galvanized steel, they feature a rust-resistant and durable black powder-coated finish. They can be mounted to show either when the shutters are open or closed.
[more...]

"Acme" Black Cast-Iron Mortise Shutter Hinges - 5 1/2" x 3 1/8"

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (5 1/2-Inch x 3 1/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.
[more...]



Results 1-30 of 6012
Sort by NameSort by Price