Moreland Privacy Pocket Door Mortise Lock Set With Oval Pulls

Your Selection:

Select Your Finish:

Quantity discounts available
Item #: R-06VM-82091X


Vintage character, quality construction and a modern, ring-turn locking solution make this mortise pocket door set a great choice for any room requiring privacy. Including sleek oval trim, a spring-loaded edge pull and your choice of 7 classic finishes, this solid brass set will do the job in style. For a complete double pocket door set, combine this locking set with the matching dummy set.

The lock is activated from the inside by turning the drop ring pull. The latch bolt is held in place by the dust proof strike or dummy mortise case (for double doors - purchase separately). An emergency release button on the exterior alows the door to be unlocked with a common screwdriver. To release the integrated edge pull, simply push on the latch bolt. This set is designed for doors between 1 3/8" and 3" in thickness.

Dimensions. Surface Trim: 7 1/4" H x 2 1/2" W. The recessed portion of the pulls must be mortised 3/16" into the door. Lock backset: 2 1/2". Faceplate: 8" H x 7/8" W. Strike plate: 3 1/2" H x 3/4" W. Lock case: 5 3/4" H x 3 1/2" W x 9/16" thick.


Installation Instructions

How to install this product in a typical situation.

Hardware Tip

The thickness of your pocket door must be greater than the sum of the mortise depth measurements for two pulls plus the thickness of the lock case.
WARNING: California Proposition 65
ReviewsProduct Q & A