Gillian Rosette Door Set with Scroll Levers

Your Selection:

Select Your Finish:

$133.90 - $358.90
Quantity discounts available
Item #: RS-01OM-19300X


Our Gillian Rosette Door Set sets a graceful tone for a variety of traditional interiors. Beautifully crafted from top-quality, solid brass, its crisp rosettes serve as striking companions to scroll-style levers. Offered in an array of classic finish options, the unlacquered brass and antique-bronze are living finishes that age gracefully over time. Created expressly for modern, pre-drilled doors, this set is as pleasing to the hand as it is the eye. ADA compliant.

Door set: 2 5/8" H x 5 3/4" W x 2 13/16" projection.
Rosette: 2 5/8" D x 7/16" projection.
Lever: 3/4" H x 4 7/8" W x 2 1/4" projection.

Latch dimensions: Cylinder: 7/8" D.
Face plate: 2 1/4" H x 1" W.
"T" Strike: 2 3/4" H x 1 1/8" W w/out tongue.
Standard door thickness: 1 3/8". For thicker doors please call for assistance.

Door Sets

Door Set Functions
Latch but no lock - The knobs or levers turn and operate a latch but there is no locking ability. Typically found on interior doors that don't need to lock, or doors with a separate deadbolt.
  • 2 Knobs or Levers
  • 2 Backplates or Rosettes
  • 1 Passage Latch with matching face plate
  • 1 Matching strike plate
  • Matching screws
  • 1 Passage Spindle
Latch and lock - This set has a privacy pin next to the inside knob or lever which is pushed in to lock. The door is unlocked by turning the knob or lever on the inside and can also be unlocked from the outside by pushing a small screwdriver through the emergency release hole. Typically found on bedroom or bathroom doors.
  • 2 Knobs or Levers
  • 2 Backplates or Rosettes
  • 1 Privacy Latch with matching face plate and privacy pin
  • 1 Matching strike plate
  • Matching screws
  • 1 Privacy Spindle
Single Dummy
No latch or lock - Like a cabinet knob, the knob or lever mounts on one side of the door and doesn't turn or operate a latch. Typically found on closet or pantry doors. This set can't be installed on a pre-drilled door.
  • 1 Knob or Lever
  • 1 Backplate or Rosette
  • Matching screws
  • 1 Dummy Spindle

Included Hardware

Pictured in Polished Brass. Your hardware will match the finish selected. Hardware not included with Dummy Sets.


Installation Instructions

How to install this product in a typical situation.

Hardware Tip

Tubular Latch: A cylindrical door latch that is installed into the edge of the door and is operated by a knob or lever via the spindle. These are typically used for modern pre-bored doors.
WARNING: California Proposition 65
ReviewsProduct Q & A