Menu

Contact
x
Call Now

Toll Free: (888) 223-2545

Customer Service
Press 3

Hardware Specialist
Press 2

Hours:
9:00 am - 8:30 pm
M-F Eastern Time

Results 1-30 of 5612
Sort by NameSort by Price

Door Knob Spindle and Dummy Spindle Hardware

Replace an old or worn door knob spindle with one of our door or dummy spindles. Tip: if you need a threaded spindle find out what the threads per inch are, and check to see that the spindle thickness is small enough to fit through the hub of your lock or latch.

Find the Right Door Knob Spindle or Dummy Spindle for Your Door

Solid-Brass Closet Spindle with Knob and Rosette in Antique-By-Hand - 3

Solid-Brass Closet Spindle with Knob and Rosette in Antique-By-Hand - 3" Spindle

Why pay for two door knobs when you only need one? This traditional-style Closet Spindle with Thumbturn and Rosette (3-Inch) is a perfect fit for closet or pantry doors where an inside knob isn't necessary. Made of solid brass, the crescent turn and rosette comes in our exclusive Antique-By-Hand, a living finish that ages gracefully over time into a beautiful natural patina.
[more...]

Brass Closet Spindle with Thumbturn and Rosette in Antique-By-Hand - 2 1/2

Brass Closet Spindle with Thumbturn and Rosette in Antique-By-Hand - 2 1/2" Spindle

Why pay for two door knobs when you only need one? This traditional-style Closet Spindle with Thumbturn and Rosette (2 1/2-Inch) is a perfect fit for closet or pantry doors where an inside knob isn't necessary. Made of solid brass, the crescent turn and rosette comes in our exclusive Antique-By-Hand, a living finish that ages gracefully over time into a beautiful natural patina.
[more...]

5

5" Threaded and Tapped Heavy-Duty Doorknob Swivel Spindle - 20 TPI

This heavy-duty spindle is designed to facilitate new or vintage doorknobs with threaded shanks of 20 TPI. Used with privacy latches and mortise locks, its hardened steel construction provides smooth operation and long-lasting wear. At 5-inch in length, it's ideal for thicker doors. Features a 3/8-inch thickness, and tapped for 10-24 set screws.
[more...]

Solid-Brass Closet Spindle with Thumbturn and Rosette (item #R-01BM-8834X)

Solid-Brass Closet Spindle with Thumbturn and Rosette

Why pay for two door knobs when you only need one? This traditional-style Closet Spindle with Thumbturn and Rosette is a perfect fit for closet or pantry doors where an inside knob isn't necessary. Made of solid brass, the crescent turn and rosette comes in our exclusive Antique-By-Hand, a living finish that ages gracefully over time into a beautiful natural patina.
[more...]

5 Finishes 5 Finishes

Small Solid-Brass Closet Spindle with Thumbturn and Rosette (item #R-01BM-8833X)

Small Solid-Brass Closet Spindle with Thumbturn and Rosette

Why pay for two door knobs when you only need one? This traditional-style Closet Spindle with Thumbturn and Rosette (3-Inch) is a perfect fit for closet or pantry doors where an inside knob isn't necessary. Made of solid brass, the crescent turn and rosette comes in your choice of several popular finishes, making it easy match your decor.
[more...]

5 Finishes 5 Finishes

5

5" Threaded Doorknob Swivel Spindle - 20 TP

This heavy-duty swivel spindle is designed to facilitate new or vintage doorknobs with threaded shanks of 20 TPI. Used with privacy latches and mortise locks, its hardened steel construction provides smooth operation and long-lasting wear. At 5-inch in length, it's ideal for thicker doors. Features a 3/8-inch thickness.
[more...]

5

5" Heavy-Duty Doorknob Swivel Spindle - Tapped 10-24

This heavy-duty spindle is designed to facilitate new or vintage doorknobs with non-threaded shanks. Used with privacy latches and mortise locks, its hardened steel construction provides smooth operation and long-lasting wear. At 5-inch in length, it's ideal for thicker doors. Features a 3/8-inch thickness, and tapped for 10-24 set screws.
[more...]

1 1/4

1 1/4" Tapped Dummy Doorknob Spindle - Tapped 10-24

This sturdy dummy spindle is designed to facilitate fixed doorknobs, with threaded shanks of 16 TPI, that don't operate a latch. Constructed of solid steel for durability, it features a 9/32-inch standard thickness. With a 1 1/4-inch length, it's ideal for closet, pantry, and French doors.
[more...]

4 3/4

4 3/4" Threaded Doorknob Swivel Spindle with 3/8" Solid Centers - 18 TPI

This sturdy spindle is designed to facilitate new or vintage doorknobs with threaded shanks of 18 TPI. Used with privacy latches and mortise locks with larger hubs, its hardened steel construction provides smooth operation and long-lasting wear. At 4 3/4-inch in length, it's ideal for thicker doors. Features two 3/8-inch solid centers and a standard 9/32-inch thickness.
[more...]

2 5/8

2 5/8" Threaded Doorknob Sectional Spindle - 16 TPI

This sturdy sectional spindle is designed to facilitate new or vintage doors with a knob on only one side and threaded shanks of 16 TPI. Its hardened steel construction provides smooth operation and long-lasting wear. Features a standard 9/32-inch thickness.
[more...]

4 3/4

4 3/4" Threaded Doorknob Swivel Spindle with 3/8" Solid Centers - 20 TPI

This sturdy spindle is designed to facilitate new or vintage doorknobs with threaded shanks of 20 TPI. Used with privacy latches and mortise locks, its hardened steel construction provides smooth operation and long-lasting wear. At 4 3/4-inch in length, it's ideal for thicker doors. Features a standard 9/32-inch thickness and two 3/8-inch solid centers.
[more...]

4 3/4

4 3/4" Threaded Doorknob Swivel Spindle with 3/8" Solid Centers - 16 TPI

This sturdy spindle is designed to facilitate new or vintage doorknobs with threaded shanks of 16 TPI. Used with privacy latches and mortise locks with larger hubs, its hardened steel construction provides smooth operation and long-lasting wear. At 4 3/4-inch in length, it's ideal for thicker doors. Features two 3/8-inch solid centers and a standard 9/32-inch thickness.
[more...]

4 3/4

4 3/4" Threaded Doorknob Swivel Spindle with Stop Pin - 16 TPI

This sturdy spindle is designed to facilitate new or vintage doorknobs with threaded shanks of 16 TPI. Used with privacy latches and mortise locks, its hardened steel construction provides smooth operation and long-lasting wear. At 4 3/4-inch in length, it's ideal for thicker doors. Features a standard 9/32-inch thickness and stop pin for stability.
[more...]

4 3/4

4 3/4" Threaded Doorknob Swivel Spindle - 16 TPI

This sturdy spindle is designed to facilitate new or vintage doorknobs with threaded shanks of 16 TPI. Used with privacy latches and mortise locks, its hardened steel construction provides smooth operation and long-lasting wear. At 5-inch in length, it's ideal for thicker doors. Features a standard 9/32-inch thickness.
[more...]

3 1/2-Inch Threaded Doorknob Swivel Spindle with Stop Pin - 20 TPI (item #R-01P-45-20-P3)

3 1/2-Inch Threaded Doorknob Swivel Spindle with Stop Pin - 20 TPI

This sturdy 3 1/2-inch spindle is designed to facilitate new or vintage doorknobs with threaded shanks of 20 TPI. Used with privacy latches and mortise locks, its hardened steel construction provides smooth operation and long-lasting wear.
[more...]

Steel Alignment Tool (item #R-01BM-8779)

Steel Alignment Tool

Alignment tool for door trim. Made of zinc-plated steel. Consisting of 2 threaded cones and a 7 mm spindle, this simple but effective tool is used to align plates and roses with the latch or lock, and to mark the location of their screws for accurate installation. Works with any door thickness.
[more...]

2 5/8

2 5/8" Threaded Doorknob Sectional Spindle - 20 TPI

This sturdy sectional spindle is designed to facilitate new or vintage doors with a knob on only one side, with threaded shanks of 20 TPI. Its hardened steel construction provides smooth operation and long-lasting wear. Features a standard 9/32-inch thickness.
[more...]

5

5" Universal Doorknob Spindle - 20 TPI

This sturdy spindle is designed to facilitate new or vintage doorknobs with nonthreaded or threaded shanks of 20 TPI. The hardened steel construction provides smooth operation and long-lasting wear. With a 5-inch length, it's ideal for thicker doors. Features a standard 9/32-inch thickness and tapped for 10-24 set screws.
[more...]

4

4" Universal Doorknob Spindle - 20 TPI

This sturdy spindle is designed to facilitate new or vintage doorknobs with nonthreaded or threaded shanks of 20 TPI. Constructed of hardened steel, it provides smooth operation and long-lasting wear. With a 4-inch length, it's ideal for standard doors. Features a 9/32-inch thickness and tapped for 10-24 set screws.
[more...]

2 1/2-Inch Steel Sectional Spindle 7 mm - 16 TPI - Tapped 10-24 (item #R-01BM-8845-16)

2 1/2-Inch Steel Sectional Spindle 7 mm - 16 TPI - Tapped 10-24

Split spindles for doorknobs. Steel. Zinc plated. Have 3 threaded holes tapped 10-24, and can be used with threaded doorknobs or with old doorknobs with square holes. Used with locks when a doorknob is needed on one side only. These have the coarser 16 TPI.
[more...]

5

5" Non-Standard Threaded Doorknob Spindle - 16 TPI

This sturdy spindle is designed to facilitate new or vintage doorknobs with threaded shanks of 16 TPI. Constructed of hardened steel, it provides smooth operation and long-lasting wear. With a 5-inch length, it's ideal for thicker doors. Features a standard 9/32-inch thickness.
[more...]

4 1/2

4 1/2" Non-Standard Threaded Doorknob Spindle - 18 TPI

This sturdy spindle is designed to facilitate new or vintage doorknobs with threaded shanks of 18 TPI. Constructed of hardened steel, it provides smooth operation and long-lasting wear. With a 4 1/2-inch length, it's ideal for thicker doors. Features a 9/32-inch thickness.
[more...]

1 1/8

1 1/8" Non-standard Threaded Dummy Doorknob Spindle 7mm - 16 TPI

This sturdy spindle is designed to facilitate fixed doorknobs with threaded shanks of 16 TPI that don't operate a latch. Typically used on closet, pantry, or French doors, it's constructed of solid steel, and features a 7mm thickness.
[more...]

4 3/4

4 3/4" Threaded and Tapped Doorknob Swivel Spindle with 3/8" Removable Centers

This sturdy spindle is designed to facilitate new or vintage doorknobs with threaded shanks of 20 TPI. Used with privacy latches and mortise locks, its hardened steel construction provides smooth operation and long-lasting wear. At 4 3/4-inch in length, it's ideal for thicker doors. Features a standard 9/32-inch thickness and removable 3/8-inch centers.
[more...]

4

4" Non-standard Threaded Doorknob Spindle - 16 TPI

This sturdy spindle is designed to facilitate new or vintage doorknobs with threaded shanks of 16 TPI. Constructed of hardened steel, it provides smooth operation and long-lasting wear. With a 4-inch length, it's ideal for standard doors. Features a 9/32-inch thickness.
[more...]

3 1/2-Inch Steel Swivel Spindle 7 mm 16-TPI (item #R-01BM-8846-16)

3 1/2-Inch Steel Swivel Spindle 7 mm 16-TPI

Our 3 1/2-Inch x 7 mm threaded doorknob swivel spindle facilitates new or vintage doorknobs with threaded shanks of 16 TPI. Used with privacy latches and mortise locks, its zinc-plated steel construction provides smooth operation and long-lasting wear.
[more...]

2 1/2-Inch Steel Sectional Spindle 7 mm - 20 TPI - Tapped 10-24 (item #R-01BM-8845-20)

2 1/2-Inch Steel Sectional Spindle 7 mm - 20 TPI - Tapped 10-24

Split spindles for doorknobs. Steel. Zinc plated. Have 3 threaded holes tapped 10-24, and can be used with threaded doorknobs or with old doorknobs with square holes. Used with locks when a doorknob is needed on one side only.
[more...]

1 1/2

1 1/2" Standard Threaded Dummy Doorknob Spindle - 20 TPI

This sturdy 1 1/2-Inch Threaded Dummy Spindle is designed to facilitate fixed doorknobs with threaded shanks of 20 TPI that don't operate a latch. Typically used on closet, pantry, or French doors, it's constructed of solid steel, and features a 9/32-inch standard thickness.
[more...]

1 1/2-Inch Steel Dummy Spindle 7 mm 20-TPI (item #R-01BM-8849-20-L)

1 1/2-Inch Steel Dummy Spindle 7 mm 20-TPI

This sturdy 1 1/2-Inch Steel Dummy Spindle is designed to facilitate fixed doorknobs with threaded shanks of 20 TPI that don't operate a latch. Typically used on closet, pantry, or French doors, it's constructed of solid steel, and features a 7 mm thickness.
[more...]

3 1/2-Inch Steel Threaded Swivel Spindle 8 mm - 20 TPI (item #R-01BM-8843-20)

3 1/2-Inch Steel Threaded Swivel Spindle 8 mm - 20 TPI

Our 3 1/2-Inch x 8mm threaded doorknob swivel spindle facilitates new or vintage doorknobs with threaded shanks of 20 TPI. Used with privacy latches and mortise locks, its zinc-plated steel construction provides smooth operation and long-lasting wear.
[more...]



Results 1-30 of 5612
Sort by NameSort by Price