Menu

Contact
x

Free Shipping At House of Antique Hardware
You Save on Shipping With Every Order

FREE Ground Shipping
On orders over $100
$6.99 Flat Rate Ground shipping
On orders under $100
2nd Day Air Shipping Starting at $13.99
How do I get Free Ground Shipping?
You get free shipping anywhere in the contiguous 48 states on all orders of $100 or more. There are no added processing or handling fees!
What is flat rate shipping?
Pay only $6.99 to ship any order under $100 - no added processing or handling fees! Applies to ground service anywhere in the contiguous US.
What about shipments to Alaska and Hawaii?
Rates begin at $6.99 and will not exceed $19.99, regardless of order size. Expedited shipping options are available for an additional charge.
What if I need my order fast?
Choose UPS 2nd Day Air with rates starting at $13.99. You'll find even faster shipping options and estimated shipping fees displayed in the shopping cart.
Do you ship internationally?
We do. Our Shipping Policy gives details on shipments to international destinations. Free Shipping and Flat Rate Shipping only apply to destinations within the United States.
Questions?
For more information about our Save on Shipping program, check our complete Shipping Policy or call Customer Service at (888) 223-2545.
X
Call Now

Toll Free: (888) 223-2545

Customer Service
Press 3

Hardware Specialist
Press 2

Hours:
9:00 am - 8:30 pm
M-F Eastern Time

Results 1-30 of 4612
Sort by NameSort by Price
Summer Hinge Sale - Save up to 20%

Classical Shutter Hardware

Copper Replacement Keeper for Shutter Bullet Catches (item #R-09JW-476)

Copper Replacement Keeper for Shutter Bullet Catches

Solid copper catch/keeper for use with bullet catches. Measures 1-inch tall by 1-inch wide by 1-inch projection and the opening is 3/8-inch wide. Formed of sheet copper approximately .037-inch thick.
[more...]

Pair of Cast Iron Sill Mounted Shutter Fasteners With Raw Iron Finish (item #R-09JW-303)

Pair of Cast Iron Sill Mounted Shutter Fasteners With Raw Iron Finish

These Victorian shutter fasteners are typically paired with Clarks Tip or full mortise type shutter hinges. The catch is sill mounted, while the hook mounts to the lower front of the shutter. Raw cast iron, painting required.
[more...]

Pair of Cast-Iron Sill Bermuda Shutter Fasteners (item #R-09JW-088303B)

Pair of Cast-Iron Sill Bermuda Shutter Fasteners

Our Victorian-style Bermuda Shutter Fasteners are typically paired with Clarks Tip or full mortise-type shutter hinges. The catch is sill mounted, while the hook mounts to the lower front of the shutter. Made of cast-iron, they feature a weather resistant, powder-coated finish.
[more...]

Galvanized Iron Faux Shutter Hinge With Black Powder-Coated Finish (item #R-09DE-148)

Galvanized Iron Faux Shutter Hinge With Black Powder-Coated Finish

Get the look of a functional shutter hinge with this handsome acorn-tip dummy. It's ideal for wood or vinyl shutters that are mounted directly to the wall - simply attach it with wood screws to the side of the panel. Made of heavy duty cast iron, galvanized and finished with a rust resistant black powder coat.
[more...]

Pair of Magnetic Shutter-Dog Holders (item #R-09JW-088439)

Pair of Magnetic Shutter-Dog Holders

Our Magnetic Shutter-Dog Holders prevent the shutter dog from over rotating, while the magnet holds the dog against the shutter to greatly reduce wind rattling. To preserve the classic look, these holders are virtually invisible. Made of stainless-steel with a nickel-plated magnet, they feature a weather-resistant, powder-coated finish.
[more...]

Pair of Shutter Anti-Vibration Brackets For Lag Mount Shutter Dogs (item #R-09EH-NV1)

Pair of Shutter Anti-Vibration Brackets For Lag Mount Shutter Dogs

These brackets made of plastic and stainless steel can be used with all of our lag mount shutter dogs. Fits up to a 3/8-inch diameter lag bolt and is easy to adjust. The brackets hold the shutter panel and dog together firmly to reduce rattling in the wind.
[more...]

Pair of Galvanized Iron Dummy Scroll Shutter Dogs With Hammered Edge (item #R-09DE-146)

Pair of Galvanized Iron Dummy Scroll Shutter Dogs With Hammered Edge

Get the look of functional hardware with these dummy tie backs. Intended for use with fixed shutters (wood or vinyl), they'll give your windows an authentic appearance. Made of heavy duty cast iron, galvanized and finished with a rust resistant black powder coat.
[more...]

Pair of Galvanized Iron Dummy Scroll Shutter Dogs With Beveled Edge (item #R-09DE-147)

Pair of Galvanized Iron Dummy Scroll Shutter Dogs With Beveled Edge

Get the look of functional hardware with these dummy tie backs. Intended for use with fixed shutters (wood or vinyl), they'll give your windows an authentic appearance. Made of heavy duty cast iron, galvanized and finished with a rust resistant black powder coat.
[more...]

Pair of Cast Iron 6-Inch Scroll Shutter Dogs - Lag Mounted (item #R-09BM-8801-BK)

Pair of Cast Iron 6-Inch Scroll Shutter Dogs - Lag Mounted

These cast iron 6-inch scroll shutter dogs are a simple and elegant way to keep shutters open while adding a lovely period detail to your home’s exterior. Ours are uniquely smooth which allows them to blend with various house styles. Can be mounted on wood or masonry with the included lag bolt. (masonry lag shield anchors not included).
[more...]

Set of

Set of "Clarks Tip" Cast Iron Shutter Hinges With 1 1/4" Throw

These charming, acorn tip hinges were commonly found on Victorians and early 20th century colonials. The hinges are surface mounted and lift off, making it easy to install or remove your shutters. The 1 1/4-inch throw is intended for flush applications.
[more...]

"Acme" Cast Iron Mortise Shutter Hinges - 3 1/8" x 2 1/2"

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (3 1/8-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.
[more...]

"Acme" Cast Iron Mortise Shutter Hinges - 3 3/4" x 2 1/2"

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (3 3/4-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.
[more...]

Pair of Small Brass & Copper Shutter Bullet Catches with Natural Finish (item #R-09JW-470)

Pair of Small Brass & Copper Shutter Bullet Catches with Natural Finish

These Small Brass and Copper Shutter Bullet Catches are an alternative to traditional shutter hold backs. Mounted to the wall and to the back of the shutter, they leave the front completely free of hardware. Use one for each shutter.
[more...]

"Acme" Cast Iron Mortise Shutter Hinges - 4 1/2" x 2 7/8"

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (4 1/2-Inch x 2 7/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.
[more...]

"Acme" Cast Iron Mortise Shutter Hinges - 5" x 3"

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (5-Inch x 3-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.
[more...]

Pair of Large Cast Iron Scallop Shell Tie Backs - Lag Mounted (item #R-09JW-251)

Pair of Large Cast Iron Scallop Shell Tie Backs - Lag Mounted

These large and finely cast scallop design shutter dogs are ideal for coastal homes. Made of heavy duty cast iron, they're finished with a rust resistant black powder coat. Easily mounted to wood or masonry with the included lag bolt.
[more...]

Pair of Large Cast Iron Grape Design Shutter Dogs - Lag Mounted (item #R-09JW-250)

Pair of Large Cast Iron Grape Design Shutter Dogs - Lag Mounted

A traditional symbol of hospitality and conviviality, the grape motif is a wonderful way to enliven your home's exterior. Made of heavy duty cast iron, these durable shutter dogs are finished with a rust resistant black powder coat. Easily mounted to wood or masonry with the included lag bolt.
[more...]

Pair of Brass & Copper Shutter Bullet Catches with Natural Finish (item #R-09JW-475)

Pair of Brass & Copper Shutter Bullet Catches with Natural Finish

These Brass and Copper Shutter Bullet Catches are an alternative to traditional shutter hold backs. Mounted to the wall and to the back of the shutter, they leave the front completely free of hardware. Use one for each shutter.
[more...]

Pair of Galvanized Iron Scroll Shutter Dogs - Lag Mounted (item #R-09DE-145)

Pair of Galvanized Iron Scroll Shutter Dogs - Lag Mounted

Rugged meets refined in these classic scroll design shutter dogs. With their elegant profile and hammered texture they beautifully compliment any style of home. Made of heavy duty cast iron, galvanized and finished with a rust resistant black powder coat. Designed for masonry applications.
[more...]

Pair of Alligator Shutter Dogs - Lag Mounted (item #R-09JW-088262)

Pair of Alligator Shutter Dogs - Lag Mounted

Our fanciful Alligator Shutter Dogs add a charming outlook to any home. Made of cast iron, they feature a textured surface and weather-resistant coating.
[more...]

Set of

Set of "Clarks Tip" Cast Iron Shutter Hinges With 3 1/4" Throw

These charming, acorn tip hinges were commonly found on Victorians and early 20th century colonials. The hinges are surface mounted and lift off, making it easy to install or remove your shutters. The 3 1/4-inch throw is optimal for brick veneered homes.
[more...]

"Acme" Cast Iron Mortise Shutter Hinges - 5 1/2" x 3 1/8"

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (5 1/2-Inch x 3 1/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.
[more...]

Pair of Cast Iron 8-Inch Scroll Shutter Dogs - Lag Mounted (item #R-09BM-8802-BK)

Pair of Cast Iron 8-Inch Scroll Shutter Dogs - Lag Mounted

These cast iron 8 1/2-inch scroll shutter dogs are a simple and elegant way to keep shutters open while adding a lovely period detail to your home’s exterior. Ours are uniquely smooth which allows them to blend with various house styles. Can be mounted on wood or masonry with the included lag bolt. (masonry lag shield anchors not included).
[more...]

Set of

Set of "Clarks Tip" Black Cast-Iron Shutter Hinges with 1 1/4" Throw

This charming Set of Clarks Tip Black Cast-Iron Shutter Hinges (1 1/4-inch throw), were commonly found on Victorians and early 20th century Colonials. Intended for flush applications, they are surface mounted and lift off, making it easy to install or remove your shutters. Features a rust resistant, powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two fasteners - enough to complete one window.
[more...]

"Acme" Black Cast-Iron Mortise Shutter Hinges - 3 1/8" x 2 1/2"

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (3 1/8-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.
[more...]

Pair of Large Iron Scroll Shutter Dogs Lag Mounted (item #R-09JW-256)

Pair of Large Iron Scroll Shutter Dogs Lag Mounted

Rugged meets refined in these large size classic scroll design shutter dogs. With their elegant profile and hammered texture they beautifully compliment any style of home. Made of heavy duty cast iron, finished with a rust resistant black powder coat. Designed for masonry applications.
[more...]

Pair of 6

Pair of 6" Cast-Iron Shutter Dogs with Mounting Hardware

Rugged meets refined in our 6-Inch Classic Hammered-Surface Shutter Dogs. With their elegant profile and hammered texture, they beautifully compliment any style of home. Made of heavy, cast iron, they feature a weather resistant, powder-coated finish. Designed for masonry applications (anchors recommended - not included). Comes complete with lag screws, magnetic holders, and masonry anchors.
[more...]

"Acme" Black Cast-Iron Mortise Shutter Hinges - 3 3/4" x 2 1/2"

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (3 3/4-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.
[more...]

Pair of Galvanized Iron Scroll Shutter Dogs - Post Mounted (item #R-09DE-144)

Pair of Galvanized Iron Scroll Shutter Dogs - Post Mounted

Rugged meets refined in these classic scroll design shutter dogs. With their elegant profile and hammered texture they beautifully compliment any style of home. Made of heavy duty cast iron, galvanized and finished with a rust resistant black powder coat. Designed for wood siding.
[more...]

Pair of Stainless Steel Bullet Shutter Catches With Natural Steel Finish (item #R-09EH-E-SS-5-8-CATCH)

Pair of Stainless Steel Bullet Shutter Catches With Natural Steel Finish

These premium stainless steel bullet catches are an alternative to traditional shutter hold backs. Mounted to the wall and to the back of the shutter, they leave the front completely free of hardware. Contains enough hardware for one window.
[more...]



Results 1-30 of 4612
Sort by NameSort by Price