36 Products

Pair of 1 1/2-Inch Offset Galvanized Iron Shutter Strap Hinges With Plate Pintles

These traditional Colonial style 1 1/2-inch offset hinges with plate pintle are still popular today! The straps are forged out of steel and the pintles are made of solid cast iron, both galvanized. These versatile hinges can be mounted to show either when the shutters are open or closed. The rough textured black powder coating provides a great period look and helps reduce rust.

$28.79
Pair of 3/4-Inch Offset Galvanized Iron Shutter Strap Hinges With Plate Pintles

These traditional Colonial style 3/4-inch offset hinges with plate pintles are still popular today! The straps are forged out of steel and the pintles are made of solid cast iron, both galvanized. These versatile hinges can be mounted to show either when the shutters are open or closed. The rough textured black powder coating provides a great period look and helps reduce rust.

$29.09
Pair of Vertical or Middle Strap Shutter Hinges With 1 1/2" Offset

These vertical shutter straps are not only distinctive in appearance - they're ideal for shutters too narrow for horizontal straps. They can also be used with New York style hinge sets on tall shutters as a middle support hinge. These very sturdy hinges lift off for easy maintenance and have a 1 1/2-inch offset (3-inch throw). Made from 3/16-inch thick cast iron, they are powder coated to resist rust. Reversible.

$35.99
"Acme" Black Cast-Iron Mortise Shutter Hinges - 3 1/8" x 2 1/2"

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (3 1/8-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

$47.99
Set of Cast Iron New York Style Shutter Hinges With 1 1/2" Offset

Authentic colonial style and a rough black finish make these classic New York strap hinges a great choice for period restorations. These very sturdy hinges lift off for easy maintenance and have a 1 1/2-inch offset (3-inch throw). Made from 1/4-inch thick cast iron, they are powder coated to resist rust.

$65.95 Sold Out
Set of "Clarks Tip" Black Cast-Iron Shutter Hinges with 1 1/4" Throw

This charming Set of Clarks Tip Black Cast-Iron Shutter Hinges (1 1/4-inch throw), were commonly found on Victorians and early 20th century Colonials. Intended for flush applications, they are surface mounted and lift off, making it easy to install or remove your shutters. Features a rust resistant, powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two fasteners - enough to complete one window.

$40.99
Pair of 9 1/4" Suffolk-Style Shutter Strap Hinges - No Offset and Pintle 1" Offset

The Colonial look of our 9 1/4-Inch Suffolk-Style Shutter Strap Hinges (no offset) is still popular today! The straps are forged out of steel and the pintles are made of solid, cast iron. They feature a textured surface and rust-resistant, powder-coated finish.

$31.99 Sold Out
"Acme" Black Cast-Iron Mortise Shutter Hinges - 3 3/4" x 2 1/2"

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (3 3/4-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

$49.99
Set of New York Style Shutter Hinges For New Construction

Colonial style shutter hinges for your new home! These hinges are powder coated black and are offset mounted to fit most modern window styles. These very sturdy hinges lift off for easy maintenance and have a minimal offset and 2 1/4-inch throw.

$71.95
Pair of Shutter Strap Hinges with Plate Pintles - 2 1/4" Offset

Still popular today, these traditional Colonial-style Shutter Strap Hinges with Plate Pintles (2 1/4-Inch Offset) can be mounted to be visible whether your shutters are open or closed. Forged from galvanized steel with cast iron pintles, they feature a rough textured, black-powder coating for a perfect period look that helps to reduce rust. Made to last a lifetime, the reversible, lift-off design makes for easy installation and maintenance.

$37.99
"Acme" Black Cast-Iron Mortise Shutter Hinges - 4 1/2" x 2 7/8"

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (4 1/2-Inch x 2 7/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

$58.95
Set of Cast Iron New York Style Shutter Hinges With 2 1/4" Offset

Authentic colonial style and a rough black finish make these classic New York strap hinges a great choice for period restorations. These very sturdy hinges lift off for easy maintenance and have a 2 1/4-inch offset (4 1/2-inch throw). Made from 1/4-inch thick cast iron, they are powder coated to resist rust.

$71.95
Pair of 3/4-Inch Offset Galvanized Iron Shutter Strap Hinges With Lag Pintles

These traditional Colonial style 3/4-inch offset hinges with lag pintles are still popular today! The straps are forged out of steel and the pintles are made of solid cast iron, both galvanized. These versatile hinges can be mounted to show either when the shutters are open or closed. The rough textured black powder coating provides a great period look and helps reduce rust.

$36.99
"Acme" Cast Iron Mortise Shutter Hinges - 3 1/8" x 2 1/2"

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (3 1/8-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

$31.99
"Acme" Black Cast-Iron Mortise Shutter Hinges - 6 1/2" x 3 1/2"

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (6 1/2-Inch x 3 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

$83.95 Sold Out
"Acme" Cast Iron Mortise Shutter Hinges - 3 3/4" x 2 1/2"

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (3 3/4-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

$32.99
"Acme" Black Cast-Iron Mortise Shutter Hinges - 5" x 3"

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (5-Inch x 3-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

$57.95
Pair of Shutter-Strap Hinges with Plate Pintles - 3 1/4" Offset

Still popular today, these traditional Colonial-style Shutter Strap Hinges with Plate Pintles (3 1/4-Inch Offset) can be mounted to be visible whether your shutters are open or closed. Forged from galvanized steel with cast iron pintles, they feature a rough textured, black-powder coating for a perfect period look that helps to reduce rust. Made to last a lifetime, the reversible, lift-off design makes for easy installation and maintenance.

$44.99
Set of "Clarks Tip" Cast Iron Shutter Hinges With 1 1/4" Throw

These charming, acorn tip hinges were commonly found on Victorians and early 20th century colonials. The hinges are surface mounted and lift off, making it easy to install or remove your shutters. The 1 1/4-inch throw is intended for flush applications.

$27.29
"Acme" Cast Iron Mortise Shutter Hinges - 4 1/2" x 2 7/8"

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (4 1/2-Inch x 2 7/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

$37.99 Sold Out
Pair of Forged Iron Offset Mortise Shutter Hinges - 5-Inch x 3-Inch

These full-mortise 5 x 3-inch shutter hinges have a unique curved offset that allows you to throw the shutter clear of the window. Made of heavy-duty forged iron with a rough textured surface, they are a great choice for Colonial or Romantic style homes. The surface is phosphate treated then lacquered, for rust-resistant, long-lasting wear.

$60.95
"Acme" Cast Iron Mortise Shutter Hinges - 6 1/2" x 3 1/2"

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (6 1/2-Inch x 3 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

$57.95
Pair of 9 1/4" Heart-Tip Shutter Strap Hinges - 1" Offset

The Colonial look of our 9 1/4-Inch Heart-Tip Shutter Strap Hinges (1-inch offset) is still popular today! The straps are forged out of steel and the pintles are made of solid, cast iron. They feature a textured surface and rust-resistant, powder-coated finish.

$32.99
"Acme" Cast Iron Mortise Shutter Hinges - 5" x 3"

This set of Victorian-style Acme Cast-Iron Mortise Shutter Hinges (5-Inch x 3-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of raw, cast iron, they must be primed and painted to prevent rusting. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window. Screws are not included.

$37.99