These traditional Colonial style 1 1/2-inch offset hinges with plate pintle are still popular today! The straps are forged out of steel and the pintles are made of solid cast iron, both galvanized. These versatile hinges can be mounted to show either when the shutters are open or closed. The rough textured black powder coating provides a great period look and helps reduce rust.

Get the look of a functional shutter hinge with this handsome acorn-tip dummy. It's ideal for wood or vinyl shutters that are mounted directly to the wall - simply attach it with wood screws to the side of the panel. Made of heavy duty cast iron, galvanized and finished with a rust resistant black powder coat.

These traditional Colonial style 3/4-inch offset hinges with plate pintles are still popular today! The straps are forged out of steel and the pintles are made of solid cast iron, both galvanized. These versatile hinges can be mounted to show either when the shutters are open or closed. The rough textured black powder coating provides a great period look and helps reduce rust.

These cast iron 6-inch scroll shutter dogs are a simple and elegant way to keep shutters open while adding a lovely period detail to your home’s exterior. Ours are uniquely smooth which allows them to blend with various house styles. Can be mounted on wood or masonry with the included lag bolt. (masonry lag shield anchors not included).

Get the look of functional hardware with these dummy tie backs. Intended for use with fixed shutters (wood or vinyl), they'll give your windows an authentic appearance. Made of heavy duty cast iron, galvanized and finished with a rust resistant black powder coat.

These vertical shutter straps are not only distinctive in appearance - they're ideal for shutters too narrow for horizontal straps. They can also be used with New York style hinge sets on tall shutters as a middle support hinge. These very sturdy hinges lift off for easy maintenance and have a 1 1/2-inch offset (3-inch throw). Made from 3/16-inch thick cast iron, they are powder coated to resist rust. Reversible.

Get the look of a functional shutter hinge with our NY-Style Faux Hinges. This flexible design can be installed on either side of the window, and offers a generous 3-inch mounting range, to accommodate variables in shutter positioning. Can be used in two orientations, providing 0 or 3-inches of throw, and locked at any angle. Comes complete with mounting screws and plastic anchors for masonry use.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (3 1/8-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

Authentic colonial style and a rough black finish make these classic New York strap hinges a great choice for period restorations. These very sturdy hinges lift off for easy maintenance and have a 1 1/2-inch offset (3-inch throw). Made from 1/4-inch thick cast iron, they are powder coated to resist rust.

Despite the name, these rat tail tie backs are an elegant addition to any home. An authentic colonial design, they're made of heavy duty cast iron, then galvanized and finished with a rust-resistant black powder coat. Easily mounted to masonry with the included lag bolt.

Popular throughout the Mid-Atlantic, these Large Georgetown Style Shutter Dogs are distinguished by their artful curl. Hand-forged from heavy duty iron, they are powder coated to resist rust. Easily mounted to masonry with the included lag bolt.

This charming Set of Clarks Tip Black Cast-Iron Shutter Hinges (1 1/4-inch throw), were commonly found on Victorians and early 20th century Colonials. Intended for flush applications, they are surface mounted and lift off, making it easy to install or remove your shutters. Features a rust resistant, powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two fasteners - enough to complete one window.

The Colonial look of our 9 1/4-Inch Suffolk-Style Shutter Strap Hinges (no offset) is still popular today! The straps are forged out of steel and the pintles are made of solid, cast iron. They feature a textured surface and rust-resistant, powder-coated finish.

These cast iron 8 1/2-inch scroll shutter dogs are a simple and elegant way to keep shutters open while adding a lovely period detail to your home’s exterior. Ours are uniquely smooth which allows them to blend with various house styles. Can be mounted on wood or masonry with the included lag bolt. (masonry lag shield anchors not included).

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (3 3/4-Inch x 2 1/2-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

Colonial style shutter hinges for your new home! These hinges are powder coated black and are offset mounted to fit most modern window styles. These very sturdy hinges lift off for easy maintenance and have a minimal offset and 2 1/4-inch throw.

Our traditional iron hook & eye works on shutters, gates or even doors. Use it to hold them open or securely closed. Made of heavy duty iron, galvanized and finished with a rust resistant black powder coat to coordinate with most exterior hardware. Available in 4 lengths.

Still popular today, these traditional Colonial-style Shutter Strap Hinges with Plate Pintles (2 1/4-Inch Offset) can be mounted to be visible whether your shutters are open or closed. Forged from galvanized steel with cast iron pintles, they feature a rough textured, black-powder coating for a perfect period look that helps to reduce rust. Made to last a lifetime, the reversible, lift-off design makes for easy installation and maintenance.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (4 1/2-Inch x 2 7/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

The gracefully curled ends of our English rat tail shutter dogs reveal the artisan's craft. Hand forged of heavy duty iron, they're finished with a rust resistant black powder coat. Easily mounted to masonry with the included lag bolt.

Authentic colonial style and a rough black finish make these classic New York strap hinges a great choice for period restorations. These very sturdy hinges lift off for easy maintenance and have a 2 1/4-inch offset (4 1/2-inch throw). Made from 1/4-inch thick cast iron, they are powder coated to resist rust.

Secure your shutters against coming storms with this sturdy hurricane slide bolt. With a long catch plate and a 3 1/8-inch throw, it balances the fastening force across both shutters. Made of solid cast iron with a black primer coat.

Rugged meets refined in these classic scroll design shutter dogs. With their elegant profile and hammered texture they beautifully compliment any style of home. Made of heavy duty cast iron, galvanized and finished with a rust resistant black powder coat. Designed for masonry applications.

Despite their name, these rat tail tie backs are an elegant addition to any home. An authentic colonial design, they're made of heavy duty cast iron, then galvanized and finished with a rust-resistant black powder coat. Easily mounted to wood siding.