The design for this distinctive hook-style sash lock dates to the 1870s. The crisp Eastlake pattern is just as fresh and appealing today. Reproduced in solid, cast brass with a choice of finish.

The bold and graphic Oriental pattern is one of our favorites. Designed by Branford Lock Works, circa 1885, this striking sash lift displays an open fan and bamboo leaves. Recreated in durable cast brass available in polished, antique or unlacquered finishes.

Hook style sash lifts are a perennial favorite. The simple, beveled edge design dates from the Victorian era, but works with everything from Colonial Revival to Mid-Century Modern. Made of stamped sheet brass.

This charming Set of Clarks Tip Black Cast-Iron Shutter Hinges (1 1/4-inch throw), were commonly found on Victorians and early 20th century Colonials. Intended for flush applications, they are surface mounted and lift off, making it easy to install or remove your shutters. Features a rust resistant, powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two fasteners - enough to complete one window.

Our Square Sash Weight (5 lb.) easily combines with other size weights to create the proper counterbalance for smooth operating windows. When stacked together for instance, one 3 lb. and two 1 lb. take up the same space as one 5 lb. while moving just as smoothly within the window pocket. Ideal for use on new construction or as replacements for damaged or lost items.

The design for this traditional sash lock dates back more than a century. Clean lined and easy to operate, it's still a great choice for homes of every style and era. Finely crafted from durable, non-rusting brass.

This set of Victorian-style Acme Black Cast-Iron Mortise Shutter Hinges (4 1/2-Inch x 2 7/8-Inch) is used in applications when enough wood trim is exposed within the window opening to mount the shutters. Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the window frame (much like an interior door hinge). Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design where the outer leaf rises slightly when opening then sets down to lock in place in the fully open or shut position, preventing lift-off from strong winds. When needed, the shutters are easily lifted off by hand without removing the hardware. Made of heavy duty cast iron, they feature a black weather-resistant powder-coated finish. The set includes two right-hand hinges, two left-hand hinges and two sill-mounted fasteners - enough to complete one window.

Parliament-style 2 1/2 x 4-inch hinges have been a favorite since the late 19th century. Our authentic reproduction is made of sturdy, solid brass, and features classic ball finials and a removable stainless-steel pin that repels rust. Ideal for deep set casement windows, it comes in your choice of four popular finishes.

This cast brass stay for sash windows measures 2 5/8 by 1 1/8-inch including the handle. Available in several finishes to match any décor.

This beautifully detailed sash lock is the crowning touch to your window restoration. Reproduced from an 1880s original, it features a lovely flower & scroll design, set off by a crisp, banded border. Finely crafted from strong and attractive cast brass, which is hand-finished with our living antique patina. The surface is not lacquered, allowing natural and desirable aging to occur.

Our Set of 3/4-inch Offset Suffolk-Style L Hinges with Narrow Plate Pintles offer traditional Colonial style. Constructed from stainless steel, they feature a rust-resistant and durable black powder-coated finish. They can be mounted to show either when the shutters are open or closed.

Authentic colonial style and a rough black finish make these classic New York strap hinges a great choice for period restorations. These very sturdy hinges lift off for easy maintenance and have a 1 1/2-inch offset (3-inch throw). Made from 1/4-inch thick cast iron, they are powder coated to resist rust.

Despite the name, these rat tail tie backs are an elegant addition to any home. An authentic colonial design, they're made of heavy duty cast iron, then galvanized and finished with a rust-resistant black powder coat. Easily mounted to masonry with the included lag bolt.

Our standard, Antique-by-Hand finish casement latch is ideal for period restorations. The authentic living finish is unlacquered and will develop highlights with use. Beautifully made from solid brass, with three strikes included.

Top of the line sash window spring bolt stay. Made of durable heavy duty solid brass and available in finishes to match your other hardware. For an attractive way to hold your windows.

Our 6-Inch Window Utility Pull is inspired by a classic bar handle - giving your windows and cabinets an old-fashioned charm. Crafted from solid brass, it features two screw holes on each side to provide extra strength for frequent use or heavier furniture. Wherever you use it, this durable pull withstands the test of time.

This beautifully detailed sash lock is the crowning touch to your window restoration. Reproduced from an 1880s original, it features a lovely flower & scroll design, set off by a crisp, banded border. Finely crafted from strong and attractive cast iron, with your choice of a lacquered antique finish or a matte black powdercoat. Over time humidity and use may cause the lacquer to wear, allowing natural and desirable aging to occur.

Truly a classic, these scroll design shutter dogs are an elegant choice for any style of home. Made of heavy duty stainless steel and powder coated black. Easily mounted to masonry with the included lag bolt.

Premium stainless steel hangers designed for wood screens or storm sashes that need to open at the bottom for ventilation or egress. Each set includes 2 hooks & 2 hangers - enough for one sash.

These cast iron 8 1/2-inch scroll shutter dogs are a simple and elegant way to keep shutters open while adding a lovely period detail to your home’s exterior. Ours are uniquely smooth which allows them to blend with various house styles. Can be mounted on wood or masonry with the included lag bolt. (masonry lag shield anchors not included).

The Colonial look of our 9 1/4-Inch Suffolk-Style Shutter Strap Hinges (no offset) is still popular today! The straps are forged out of steel and the pintles are made of solid, cast iron. They feature a textured surface and rust-resistant, powder-coated finish.

Finest quality forged brass window pulley with chromed steel axle and sealed bearing. This pulley can be used with sash weights up to 1 3/4-inch diameter and #45 sash chain or smaller. The 2 1/4-inch diameter wheel is precision machined for flawless operation.

This pair of lightweight and sturdy 14 inch stays is designed for small Bahama or Bermuda shutters and made out of aluminum to avoid rust. This set comes with brass pins for attaching the rod to the brackets when the shutter is held open. When the shutter is to be closed during a storm the rods can be removed and the brackets locked together to keep the shutter fastened. The bars can also be cut to smaller lengths if desired. Optional sill mount brackets are included with this set.

Our traditional iron hook & eye works on shutters, gates or even doors. Use it to hold them open or securely closed. Made of heavy duty iron, galvanized and finished with a rust resistant black powder coat to coordinate with most exterior hardware. Available in 4 lengths.